# packages

pkgId: 2c5a3f2c74bf8d76d07a5e1057d585c3ef14d973a645f623dbfc3240121abc70
name: perl-Test-LWP-UserAgent
arch: src
version: 0.030
epoch: 0
release: 1.fc23
summary: LWP::UserAgent suitable for simulating and testing network calls
url: http://search.cpan.org/dist/Test-LWP-UserAgent/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-15.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-LWP-UserAgent-0.030-1.fc23.src.rpm
checksum_type: sha256
description:
  This module is a subclass of LWP::UserAgent which overrides a few key low-
  level methods that are concerned with actually sending your request over
  the network, allowing an interception of that request and simulating a
  particular response. This greatly facilitates testing of client networking
  code where the server follows a known protocol.


pkgId: efcaf96bc7e0fb9fd026fb47bfd7988cdaab07a9c2a7b9d2d6cab5594f314d8d
name: perl-Test-LeakTrace
arch: src
version: 0.15
epoch: 0
release: 6.fc23
summary: Trace memory leaks
url: http://search.cpan.org/dist/Test-LeakTrace/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder03.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-LeakTrace-0.15-6.fc23.src.rpm
checksum_type: sha256
description:
  Test::LeakTrace provides several functions that trace memory leaks. This module
  scans arenas, the memory allocation system, so it can detect any leaked SVs in
  given blocks.

  Leaked SVs are SVs that are not released after the end of the scope they have
  been created. These SVs include global variables and internal caches. For
  example, if you call a method in a tracing block, perl might prepare a cache
  for the method. Thus, to trace true leaks, no_leaks_ok() and leaks_cmp_ok()
  executes a block more than once.


pkgId: ff0777a30ac5dbfcdc83728c6426bd87bf92394e99e299691c93e1dbf6780a50
name: perl-Test-LectroTest
arch: src
version: 0.5001
epoch: 0
release: 8.fc23
summary: Easy, automatic, specification-based tests
url: http://search.cpan.org/dist/Test-LectroTest/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-20.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-LectroTest-0.5001-8.fc23.src.rpm
checksum_type: sha256
description:
  LectroTest is an automated, specification-based testing system. To use it,
  declare properties that specify the expected behavior of your software. Then
  invoke LectroTest to test whether those properties hold.

  LectroTest does this by running repeated random trials against your software.
  If LectroTest finds that a property doesn't hold, it emits the counterexample
  that "broke" your software. You can then plug the counterexample into your
  software to debug the problem.


pkgId: 2ea8e2055293ccfebc03d64b20bcfc9deec3d4f87125b83d611367415dbb43ed
name: perl-Test-Log-Dispatch
arch: src
version: 0.03
epoch: 0
release: 14.fc23
summary: Test what you are logging
url: http://search.cpan.org/dist/Test-Log-Dispatch/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-09.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Log-Dispatch-0.03-14.fc23.src.rpm
checksum_type: sha256
description:
  Test::Log::Dispatch is a Log::Dispatch object that keeps track of
  everything logged to it in memory, and provides convenient tests against
  what has been logged.


pkgId: a3e4170a3c51e535acae887493a71b72a0f31ca01a174f8e5d7528d21fcf1d6e
name: perl-Test-LongString
arch: src
version: 0.17
epoch: 0
release: 3.fc23
summary: Perl module to test long strings
url: http://search.cpan.org/dist/Test-LongString/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-23.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-LongString-0.17-3.fc23.src.rpm
checksum_type: sha256
description:
  This module provides some drop-in replacements for the string comparison
  functions of Test::More, but which are more suitable when you test against
  long strings. If you've ever had to search for text in a multi-line string
  like an HTML document, or find specific items in binary data, this is the
  module for you.


pkgId: 2184f3e1007734b03a591b5ef044767feb827c435b5d9f994ac88b51af7dfcaa
name: perl-Test-Manifest
arch: src
version: 2.02
epoch: 0
release: 3.fc23
summary: Test case module for Perl
url: http://search.cpan.org/dist/Test-Manifest/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-23.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Manifest-2.02-3.fc23.src.rpm
checksum_type: sha256
description:
  MakeMaker assumes that you want to run all of the .t files in the t/ directory
  in ascii-betical order during make test unless you say otherwise. This leads to
  some interesting naming schemes for test files to get them in the desired
  order.

  You can specify any order or any files that you like, though, with the test
  directive to WriteMakefile.

  Test::Manifest looks in the t/test_manifest file to find out which tests you
  want to run and the order in which you want to run them. It constructs the
  right value for MakeMaker to do the right thing.


pkgId: b18cb46e2069b06eb35f0b915d9eb523a787812386bebe689864161d68273945
name: perl-Test-Memory-Cycle
arch: src
version: 1.04
epoch: 0
release: 23.fc23
summary: Check for memory leaks and circular memory references
url: http://search.cpan.org/dist/Test-Memory-Cycle/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-21.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Memory-Cycle-1.04-23.fc23.src.rpm
checksum_type: sha256
description:
  Perl's garbage collection has one big problem: Circular references
  can't get cleaned up.  A circular reference can be as simple as two
  objects that refer to each other.
  "Test::Memory::Cycle" is built on top of "Devel::Cycle" to give you an
  easy way to check for these circular references.


pkgId: 7481c0e005be8b6318d43354245dcb034f28c37f765477c2217b53d141e80941
name: perl-Test-MemoryGrowth
arch: src
version: 0.02
epoch: 0
release: 1.fc23
summary: Assert that code does not cause growth in memory usage
url: http://search.cpan.org/dist/Test-MemoryGrowth/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-14.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-MemoryGrowth-0.02-1.fc23.src.rpm
checksum_type: sha256
description:
  This module provides a function to check that a given block of code does
  not result in the process consuming extra memory once it has finished.
  Despite the name of this module it does not, in the strictest sense of the
  word, test for a memory leak: that term is specifically applied to cases
  where memory has been allocated but all record of it has been lost, so it
  cannot possibly be reclaimed. While the method employed by this module can
  detect such bugs, it can also detect cases where memory is still referenced
  and reachable, but the usage has grown more than would be expected or
  necessary.


pkgId: afb3343ea264550ecf46a1e6dc46a6aa8043367196b75d1329cb7f36e939364c
name: perl-Test-MockObject
arch: src
version: 1.20150527
epoch: 0
release: 3.fc23
summary: Perl extension for emulating troublesome interfaces
url: http://search.cpan.org/dist/Test-MockObject/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder09.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-MockObject-1.20150527-3.fc23.src.rpm
checksum_type: sha256
description:
  Test::MockObject is a highly polymorphic testing object, capable of
  looking like all sorts of objects.  This makes white-box testing much
  easier, as you can concentrate on what the code being tested sends to
  and receives from the mocked object, instead of worrying about faking
  up your own data.  (Another option is not to test difficult things.
  Now you have no excuse.)


pkgId: de308083cfcb9b25ca714e7e4f189413e5ea165340472477cd0b06869663fe13
name: perl-Test-MockTime
arch: src
version: 0.15
epoch: 0
release: 1.fc23
summary: Replaces actual time with simulated time
url: http://search.cpan.org/dist/Test-MockTime/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-05.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-MockTime-0.15-1.fc23.src.rpm
checksum_type: sha256
description:
  This module was created to enable test suites to test code at specific
  points in time. Specifically it overrides localtime, gmtime and time at
  compile time and then relies on the user supplying a mock time via
  set_relative_time, set_absolute_time or set_fixed_time to alter future
  calls to gmtime,time or localtime.


pkgId: 531a9a5bd550328df3e8470071a3df2d9d4286f0cf67bdb40b2ab7283118595b
name: perl-Test-Modern
arch: src
version: 0.013
epoch: 0
release: 3.fc23
summary: Precision testing for modern perl
url: http://search.cpan.org/dist/Test-Modern/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-13.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Modern-0.013-3.fc23.src.rpm
checksum_type: sha256
description:
  Test::Modern provides the best features of Test::More, Test::Fatal,
  Test::Warnings, Test::API, Test::LongString, and Test::Deep, as well as ideas
  from Test::Requires, Test::DescribeMe, Test::Moose, and Test::CleanNamespaces.

  Test::Modern also automatically imposes strict and warnings on your script,
  and loads IO::File (much of the same stuff Modern::Perl does).


pkgId: 414fa37bedb0abda96027a8b0af0dd86f49ce435825d32d068397cb3a331cdfd
name: perl-Test-Module-Used
arch: src
version: 0.2.6
epoch: 0
release: 3.fc23
summary: Test required module is really used and vice versa between lib/t and META.yml
url: http://search.cpan.org/dist/Test-Module-Used/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-13.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Module-Used-0.2.6-3.fc23.src.rpm
checksum_type: sha256
description:
  This module reads META.yml and gets build_requires and requires. It compares
  required module is really used and used module is really required.


pkgId: 7d36fadc8e445b44ea30d4f5b3712271a9df6aecad0f3edd2282e381a4729155
name: perl-Test-Mojibake
arch: src
version: 1.1
epoch: 0
release: 1.fc23
summary: Check your source for encoding misbehavior
url: http://search.cpan.org/dist/Test-Mojibake/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-08.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Mojibake-1.1-1.fc23.src.rpm
checksum_type: sha256
description:
  Many modern text editors automatically save files using UTF-8 codification.
  However, the perl interpreter does not expect it by default. Whilst this does
  not represent a big deal on (most) backend-oriented programs, Web framework
  (Catalyst, Mojolicious) based applications will suffer so-called Mojibake
  (literally: "unintelligible sequence of characters"). Even worse: if an editor
  saves BOM (Byte Order Mark, U+FEFF character in Unicode) at the start of a
  script with the executable bit set (on Unix systems), it won't execute at all,
  due to shebang corruption.

  Avoiding codification problems is quite simple:

   * Always use utf8/use common::sense when saving source as UTF-8
   * Always specify =encoding utf8 when saving POD as UTF-8
   * Do neither of above when saving as ISO-8859-1
   * Never save BOM (not that it's wrong; just avoid it as you'll barely
     notice its presence when in trouble)

  However, if you find yourself upgrading old code to use UTF-8 or trying to
  standardize a big project with many developers, each one using a different
  platform/editor, reviewing all files manually can be quite painful, especially
  in cases where some files have multiple encodings (note: it all started when I
  realized that gedit and derivatives are unable to open files with character
  conversion tables).

  Enter the Test::Mojibake ;)


pkgId: eba2296cd8dfa4da545399c66283b92bac9cfc459704f9f9daee22fb1ad010fa
name: perl-Test-Moose-More
arch: src
version: 0.033
epoch: 0
release: 1.fc23
summary: More tools for testing Moose packages
url: http://search.cpan.org/dist/Test-Moose-More/
rpm_license: LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder03.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Moose-More-0.033-1.fc23.src.rpm
checksum_type: sha256
description:
  This package contains a number of additional tests that can be employed
  against Moose classes/roles. It is intended to replace Test::Moose.


pkgId: 4095e724453454426623cdafd845bf1e70b7c17c397327a3689995d26f95d9ac
name: perl-Test-Most
arch: src
version: 0.34
epoch: 0
release: 5.fc23
summary: Perl module with test functions and features
url: http://search.cpan.org/dist/Test-Most/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-04.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Most-0.34-5.fc23.src.rpm
checksum_type: sha256
description:
  Most commonly needed test functions and features. This module provides you with
  the most commonly used testing functions and gives you a bit more fine-grained
  control over your test suite.


pkgId: 6ae7dfc3bade09aec4d27e12bf9ad2d8a6d6b1fdbf99d4fbf43603abfc292c72
name: perl-Test-Name-FromLine
arch: src
version: 0.13
epoch: 0
release: 4.fc23
summary: Automatically name tests from their source code
url: http://search.cpan.org/dist/Test-Name-FromLine/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-16.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Name-FromLine-0.13-4.fc23.src.rpm
checksum_type: sha256
description:
  Test::Name::FromLine is a testing helper that automatically names each unit
  test from its source code declaration, unless it was explicitly named.


pkgId: 96d06ff9696b009ccae86438b5dbf08d0f635f9e1800073bec2ee0f4ecf13f54
name: perl-Test-NeedsDisplay
arch: src
version: 1.07
epoch: 0
release: 11.fc23
summary: Ensure that tests needing a display have one
url: http://search.cpan.org/dist/Test-NeedsDisplay/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-04.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-NeedsDisplay-1.07-11.fc23.src.rpm
checksum_type: sha256
description:
  When testing GUI applications, sometimes applications or modules absolutely
  insist on a display, even just to load a module without actually showing
  any objects.


pkgId: 352ac73b08b391a2ad4248d0146933528430488254559b900c9ac9a54f3fcb86
name: perl-Test-NoBreakpoints
arch: src
version: 0.15
epoch: 0
release: 11.fc23
summary: Test that files do not contain soft breakpoints
url: http://search.cpan.org/dist/Test-NoBreakpoints/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-10.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-NoBreakpoints-0.15-11.fc23.src.rpm
checksum_type: sha256
description:
  Test::NoBreakpoints checks that files contain neither the string
  "$DB::single = 1" nor "$DB::signal = 1".


pkgId: ef2038fc38436d7f0f7dbfe3d3f482a2f720cf74f004b0c63b91e77350b8556d
name: perl-Test-NoPlan
arch: src
version: 0.0.6
epoch: 0
release: 10.fc23
summary: Check perl test files for no_plan
url: http://search.cpan.org/dist/Test-NoPlan/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-03.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-NoPlan-0.0.6-10.fc23.src.rpm
checksum_type: sha256
description:
  It is a good idea to ensure you have defined how many tests should be run
  within each test script - to catch cases where tests bomb out part way through
  so you know how many tests were not actually run. This module checks all your
  test plan files to ensure 'no_plan' is not used.


pkgId: 4bd61e666b472f1178bb5c1f83208b7cc5f435c39fc63b6b7cdeaccbd633cb91
name: perl-Test-NoTabs
arch: src
version: 1.4
epoch: 0
release: 3.fc23
summary: Check the presence of tabs in your project
url: http://search.cpan.org/dist/Test-NoTabs/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-14.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-NoTabs-1.4-3.fc23.src.rpm
checksum_type: sha256
description:
  This module scans your project/distribution for any perl files (scripts,
  modules, etc.) for the presence of tabs.


pkgId: 98d059ca3ec24a5483831e50e3afc1e84c923915b2f09046c52f020d3f0d5c41
name: perl-Test-NoWarnings
arch: src
version: 1.04
epoch: 0
release: 8.fc23
summary: Make sure you didn't emit any warnings while testing
url: http://search.cpan.org/dist/Test-NoWarnings/
rpm_license: LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-12.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-NoWarnings-1.04-8.fc23.src.rpm
checksum_type: sha256
description:
  In general, your tests shouldn't produce warnings. This module causes any
  warnings to be captured and stored. It automatically adds an extra test
  that will run when your script ends to check that there were no warnings.
  If there were any warnings, the test will give a "not ok" and diagnostics of
  where, when and what the warning was, including a stack trace of what was
  going on when the it occurred.


pkgId: 9928c4899cc6917f1fc44bfa4c33b675e3ff422a127a03c03ae7aac8a082d03a
name: perl-Test-Number-Delta
arch: src
version: 1.06
epoch: 0
release: 3.fc23
summary: Compare the difference between numbers against a given tolerance
url: http://search.cpan.org/dist/Test-Number-Delta/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder09.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Number-Delta-1.06-3.fc23.src.rpm
checksum_type: sha256
description:
  At some point or another, most programmers find they need to compare
  floating-point numbers for equality. The typical idiom is to test if
  the absolute value of the difference of the numbers is within a
  desired tolerance, usually called epsilon. This module provides such
  a function for use with Test::Harness.


pkgId: cd2394de97af7a0d76c117f13c2393d0b3742e4a8c002d048dfd79ee85a56d5b
name: perl-Test-Object
arch: src
version: 0.07
epoch: 0
release: 23.fc23
summary: Thoroughly testing objects via registered handlers
url: http://search.cpan.org/dist/Test-Object/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-07.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Object-0.07-23.fc23.src.rpm
checksum_type: sha256
description:
  Test::Object is a testing package designed to allow you to easily test
  what you believe is a valid object against the expected behaviour of
  all of the classes in its inheritance tree in one single call.


pkgId: 664747c117d21c08989aed6d2d7ee7be22fd2d9c91eec2c8524ca8302effbbfe
name: perl-Test-Output
arch: src
version: 1.03
epoch: 0
release: 5.fc23
summary: Utilities to test STDOUT and STDERR messages
url: http://search.cpan.org/dist/Test-Output/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-07.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Output-1.03-5.fc23.src.rpm
checksum_type: sha256
description:
  Test::Output provides a simple interface for testing output sent to STDOUT
  or STDERR. A number of different utilities are included to try and be as
  flexible as possible to the tester.


pkgId: d3d6534dea6a233618cfa74824038e7e2b99f4ee5f241ccf5a1736ba16016fbe
name: perl-Test-POE-Client-TCP
arch: src
version: 1.12
epoch: 0
release: 8.fc23
summary: POE Component providing TCP client services for test cases
url: http://search.cpan.org/dist/Test-POE-Client-TCP/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-04.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-POE-Client-TCP-1.12-8.fc23.src.rpm
checksum_type: sha256
description:
  Test::POE::Client::TCP is a POE component that provides a TCP client
  framework for inclusion in client component test cases, instead of having
  to roll your own.


pkgId: 6bccc1e247593b0486cf8f184f2ece800518d480dbbfaf5c1d0b281a781f6ca3
name: perl-Test-POE-Server-TCP
arch: src
version: 1.18
epoch: 0
release: 13.fc23
summary: POE Component providing TCP server services for test cases
url: http://search.cpan.org/dist/Test-POE-Server-TCP/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-10.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-POE-Server-TCP-1.18-13.fc23.src.rpm
checksum_type: sha256
description:
  Test::POE::Server::TCP is a POE component that provides a TCP server
  framework for inclusion in client component test cases, instead of having
  to roll your own.


pkgId: 1c8639d657295447ba22c211f1ff4a7d6e43a57c3c7b704fc2bd4191113a489c
name: perl-Test-Perl-Critic
arch: src
version: 1.03
epoch: 0
release: 3.fc23
summary: Use Perl::Critic in test programs
url: http://search.cpan.org/dist/Test-Perl-Critic/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-14.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Perl-Critic-1.03-3.fc23.src.rpm
checksum_type: sha256
description:
  Test::Perl::Critic wraps the Perl::Critic engine in a convenient
  subroutine suitable for test programs written using the Test::More
  framework. This makes it easy to integrate coding-standards enforcement
  into the build process. For ultimate convenience (at the expense of some
  flexibility), see the criticism pragma.


pkgId: ebef3f2a08ae06d164c4ce610d5f7ebd6e8e61ab025dd1304a2ef00af448a204
name: perl-Test-Perl-Critic-Progressive
arch: src
version: 0.03
epoch: 0
release: 15.fc23
summary: Gradually enforce coding standards
url: http://search.cpan.org/dist/Test-Perl-Critic-Progressive/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder03.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Perl-Critic-Progressive-0.03-15.fc23.src.rpm
checksum_type: sha256
description:
  Applying coding standards to large amounts of legacy code is a daunting
  task. Often times, legacy code is so non-compliant that it seems downright
  impossible. But, if you consistently chip away at the problem, you will
  eventually succeed! Test::Perl::Critic::Progressive uses the Perl::Critic
  engine to prevent further deterioration of your code and gradually steer it
  towards conforming with your chosen coding standards.


pkgId: 008e5927c0a54cca876a9045f371698146998bd0d15863de2e1096795eb0f81b
name: perl-Test-Pod-Content
arch: src
version: 0.0.6
epoch: 0
release: 11.fc23
summary: Test a Pod's content
url: http://search.cpan.org/dist/Test-Pod-Content/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder02.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Pod-Content-0.0.6-11.fc23.src.rpm
checksum_type: sha256
description:
  This is a very simple module for testing a Pod's content. It is mainly intended
  for testing the content of generated Pod - that is, the Pod included in perl
  modules generated by some mechanism. Another usage example is to test whether
  all files contain the same copyright notice.


pkgId: 3b09f2c6934b2411661d4230d9dbfe157ecc2f399b5811e2c9f95535926af745
name: perl-Test-Pod-Coverage
arch: src
version: 1.10
epoch: 0
release: 4.fc23
summary: Check for pod coverage in your distribution
url: http://search.cpan.org/dist/Test-Pod-Coverage/
rpm_license: Artistic 2.0
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-12.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Pod-Coverage-1.10-4.fc23.src.rpm
checksum_type: sha256
description:
  Test::Pod::Coverage is used to create a test for your distribution, to
  ensure that all relevant files in your distribution are appropriately
  documented in pod.


pkgId: 2ca5a9991483bbf1de2e62e37208fcb8645efc2aeeb73d145364cb0fdc593937
name: perl-Test-Pod-LinkCheck
arch: src
version: 0.008
epoch: 0
release: 4.fc23
summary: Tests POD for invalid links
url: http://search.cpan.org/dist/Test-Pod-LinkCheck/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-14.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Pod-LinkCheck-0.008-4.fc23.src.rpm
checksum_type: sha256
description:
  This module looks for any links in your POD and verifies that they point to
  a valid resource. It uses the Pod::Simple parser to analyze the pod files
  and look at their links. In a nutshell, it looks for L<Foo> links and makes
  sure that Foo exists. It also recognizes section links, L</SYNOPSIS> for
  example. Also, manual pages are resolved and checked.


pkgId: 359c46d60dc0b8b8913de749eb21f78ec6f45469356fb20ab9291f5a5089cb10
name: perl-Test-Pod-No404s
arch: src
version: 0.02
epoch: 0
release: 4.fc23
summary: Checks POD for HTTP 404 links
url: http://search.cpan.org/dist/Test-Pod-No404s/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-14.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Pod-No404s-0.02-4.fc23.src.rpm
checksum_type: sha256
description:
  This module looks for any HTTP(S) links in your POD and verifies that they
  will not return a 404. It uses LWP::UserAgent for the heavy lifting, and
  simply lets you know if it failed to retrieve the document. More specifically,
  it uses $response->is_error as the "test".


pkgId: 541e059761c5ecf7b56fb7195ed7b1c988c02fe2c0eff3868dde25bb6d6a7656
name: perl-Test-Pod-Spelling-CommonMistakes
arch: src
version: 1.001
epoch: 0
release: 3.fc23
summary: Checks POD for common spelling mistakes
url: http://search.cpan.org/dist/Test-Pod-Spelling-CommonMistakes/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-06.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Pod-Spelling-CommonMistakes-1.001-3.fc23.src.rpm
checksum_type: sha256
description:
  This module checks your POD for common spelling errors. This differs from
  Test::Spelling because it doesn't use your system spellchecker and instead
  uses Pod::Spell::CommonMistakes for the heavy lifting. Using it is the same
  as any standard Test::* module, as seen here.


pkgId: 7d2c87ffc971fb6063bbef83b98ed3f75979a9070321a37d0da01e80e3c5354c
name: perl-Test-Portability-Files
arch: src
version: 0.06
epoch: 0
release: 5.fc23
summary: Check file names portability
url: http://search.cpan.org/dist/Test-Portability-Files/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-05.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Portability-Files-0.06-5.fc23.src.rpm
checksum_type: sha256
description:
  This module is used to check the portability across operating systems of
  the names of the files present in the distribution of a module. The tests
  use the advice given in "Files and Filesystems" in perlport. The author of
  a distribution can select which tests to execute.


pkgId: a2a9df7284025eaeb1547eaac762edc6f9eafc1a04c655b2222116bbcae64cd0
name: perl-Test-PostgreSQL
arch: src
version: 1.06
epoch: 0
release: 3.fc23
summary: PostgreSQL runner for Perl tests
url: http://search.cpan.org/dist/Test-PostgreSQL/
rpm_license: Artistic 2.0 and (GPL+ or Artistic)
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-16.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-PostgreSQL-1.06-3.fc23.src.rpm
checksum_type: sha256
description:
  The Test::PostgreSQL Perl module automatically setups a PostgreSQL instance in
  a temporary directory, and destroys it when the Perl script exits.


pkgId: 8da8024e18590078e1666b644057b5043de8468d97283de632d66b5de0524557
name: perl-Test-Prereq
arch: src
version: 1.039
epoch: 0
release: 1.fc23
summary: Check if Makefile.PL has the right pre-requisites
url: http://search.cpan.org/dist/Test-Prereq/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-02.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Prereq-1.039-1.fc23.src.rpm
checksum_type: sha256
description:
  The prereq_ok() function examines the modules it finds in blib/lib/,
  blib/script, and the test files it finds in t/ (and test.pl). It figures
  out which modules they use, skips the modules that are in the Perl core,
  and compares the remaining list of modules to those in the PREREQ_PM
  section of Makefile.PL.


pkgId: 196ae2e9a12933b12eb327082d5a69d85919e0c5a313abfa939cbf89526cb491
name: perl-Test-Refcount
arch: src
version: 0.08
epoch: 0
release: 5.fc23
summary: Assert reference counts on objects
url: http://search.cpan.org/dist/Test-Refcount/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder21.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Refcount-0.08-5.fc23.src.rpm
checksum_type: sha256
description:
  The Perl garbage collector uses simple reference counting during the normal
  execution of a program. This means that cycles or unweakened references in
  other parts of code can keep an object around for longer than intended. To
  help avoid this problem, the reference count of a new object from its class
  constructor ought to be 1. This way, the caller can know the object will be
  properly DESTROYed when it drops all of its references to it.


pkgId: 1418e802b5dbd8fb654f1e47d758120ba4271d4cf881ae6523f14a49db099457
name: perl-Test-Regression
arch: src
version: 0.07
epoch: 0
release: 7.fc23
summary: Test library that can generate outputs and compare against them
url: http://search.cpan.org/dist/Test-Regression/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-09.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Regression-0.07-7.fc23.src.rpm
checksum_type: sha256
description:
  Using the various Test:: modules you can compare the output of a function
  against what you expect. However if the output is complex and changes from
  version to version, maintenance of the expected output could be costly.
  This module allows one to use the test code to generate the expected
  output, so that if the differences with model output are expected, one can
  easily refresh the model output.


pkgId: 09838a6cb7720c5b923f591a310e8cc02047f585b11deb27e5598a5b28e4f76c
name: perl-Test-Reporter
arch: src
version: 1.62
epoch: 0
release: 3.fc23
summary: Sends test results to cpan-testers@perl.org
url: http://search.cpan.org/dist/Test-Reporter/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder13.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Reporter-1.62-3.fc23.src.rpm
checksum_type: sha256
description:
  Test::Reporter reports the test results of any given distribution to the
  CPAN Testers project. Test::Reporter has wide support for various perl5's
  and platforms.


pkgId: babb9be072224a19c07b480db35421b5bddf309e9c7c77715f3c67b2c8275e26
name: perl-Test-Requires
arch: src
version: 0.10
epoch: 0
release: 1.fc23
summary: Checks to see if a given module can be loaded
url: http://search.cpan.org/dist/Test-Requires
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-18.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Requires-0.10-1.fc23.src.rpm
checksum_type: sha256
description:
  Test::Requires checks to see if the module can be loaded.

  If this fails, rather than failing tests this skips all tests.


pkgId: effb0e55202db67bdf9d6c0d4303d3710f03d37f876bccf6f8312023b21b4980
name: perl-Test-RequiresInternet
arch: src
version: 0.05
epoch: 0
release: 3.fc23
summary: Easily test network connectivity
url: http://search.cpan.org/dist/Test-RequiresInternet/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-08.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-RequiresInternet-0.05-3.fc23.src.rpm
checksum_type: sha256
description:
  This module is intended to easily test network connectivity before functional
  tests begin to non-local Internet resources. It does not require any modules
  beyond those supplied in core Perl.

  If you do not specify a host/port pair, then the module defaults to using
  www.google.com on port 80. You may optionally specify the port by its name, as
  in http or ldap. If you do this, the test module will attempt to look up the
  port number using getservbyname. If you do specify a host and port, they must
  be specified in pairs. It is a fatal error to omit one or the other.

  If the environment variable NO_NETWORK_TESTING is set, then the tests will be
  skipped without attempting any socket connections.

  If the sockets cannot connect to the specified hosts and ports, the exception
  is caught, reported and the tests skipped.


pkgId: cb984a9f9cfd74bb099e4fc477b885134a4a0caf71cc8fc914dd411853ca465b
name: perl-Test-Routine
arch: src
version: 0.020
epoch: 0
release: 5.fc23
summary: Composable units of assertion
url: http://search.cpan.org/dist/Test-Routine/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm04-builder09.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Routine-0.020-5.fc23.src.rpm
checksum_type: sha256
description:
  Test::Routine is a very simple framework for writing your tests as
  composable units of assertion. In other words: roles.


pkgId: 2710bb56895e08894f7956de0053a7600e3f6c72646addbee29156f9e3f45b58
name: perl-Test-Run
arch: src
version: 0.0303
epoch: 0
release: 3.fc23
summary: Extensible and object-oriented test harness for TAP scripts
url: http://search.cpan.org/dist/Test-Run/
rpm_license: (GPL+ or Artistic) and (GPLv2+ or Artistic) and MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-22.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Run-0.0303-3.fc23.src.rpm
checksum_type: sha256
description:
  These Perl modules are an improved test harness based on Test::Harness, but
  more modular, extensible and object-oriented.


pkgId: 2f78f858e844a0689abefbb8c95b15b03fc97328aa64b35aa9b0e04febe3c17e
name: perl-Test-Run-CmdLine
arch: src
version: 0.0128
epoch: 0
release: 3.fc23
summary: Run TAP tests from command line using the Test::Run module
url: http://search.cpan.org/dist/Test-Run-CmdLine/
rpm_license: (GPL+ or Artistic) and MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder08.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Run-CmdLine-0.0128-3.fc23.src.rpm
checksum_type: sha256
description:
  These Perl modules allow one to run TAP tests and analyze them from the
  command line using the Test::Run module. It provides runprove tool with
  command line facilities similar to Test::Harness' prove tool.


pkgId: 519987a6173e2b62c8fce1b2d2b4dea77302c278a095a8f8de3ac00bea7e1ed6
name: perl-Test-Script
arch: src
version: 1.10
epoch: 0
release: 4.fc23
summary: Cross-platform basic tests for scripts
url: http://search.cpan.org/dist/Test-Script/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-18.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Script-1.10-4.fc23.src.rpm
checksum_type: sha256
description:
  The intent of this module is to provide a series of basic tests for scripts
  in the bin directory of your Perl distribution.


pkgId: 5d31a4982d43d08f49be188440b7b63c042b36323e6197026bf8e9846df73787
name: perl-Test-Script-Run
arch: src
version: 0.04
epoch: 0
release: 16.fc23
summary: Test the script with run
url: http://search.cpan.org/dist/Test-Script-Run/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-07.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Script-Run-0.04-16.fc23.src.rpm
checksum_type: sha256
description:
  This module exports some subs to help test and run scripts in your
  distribution's bin/ directory, if the script path is not absolute.


pkgId: fcc7d6b0e1c65d44c4545a8e31c79344b6c4aa718937e7a07d0197f977b55278
name: perl-Test-SharedFork
arch: src
version: 0.34
epoch: 0
release: 1.fc23
summary: Fork test
url: http://search.cpan.org/dist/Test-SharedFork
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-05.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-SharedFork-0.34-1.fc23.src.rpm
checksum_type: sha256
description:
  Test::SharedFork is utility module for Test::Builder. It manages testing
  by keeping the test count consistent between parent and child processes.


pkgId: 9a0c9f7c809fe56a2963b90f2a0cd07716309427a1157016a0e9c4cf767696f3
name: perl-Test-Signature
arch: src
version: 1.11
epoch: 0
release: 3.fc23
summary: Automated SIGNATURE testing
url: http://search.cpan.org/dist/Test-Signature/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder11.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Signature-1.11-3.fc23.src.rpm
checksum_type: sha256
description:
  Module::Signature allows you to verify that a distribution has not been
  tampered with. Test::Signature lets that be tested as part of the
  distribution's test suite.


pkgId: 3ca588e850bf6be494cba1b29592be3fd2f3aadeb2a8bf987c0c27be236e5ef0
name: perl-Test-Simple
arch: src
version: 1.001014
epoch: 0
release: 346.fc23
summary: Basic utilities for writing tests
url: http://search.cpan.org/dist/Test-Simple
rpm_license: (GPL+ or Artistic) and CC0 and Public Domain
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm02-builder09.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Simple-1.001014-346.fc23.src.rpm
checksum_type: sha256
description:
  This package provides the bulk of the core testing facilities. For more
  information, see perldoc for Test::Simple, Test::More, etc.

  This package is the CPAN component of the dual-lifed core package Test-Simple.


pkgId: b8c697141c347aa2d15decdff8e759f668be49659dba80c1e3c78659bcac66ab
name: perl-Test-Smoke
arch: src
version: 1.60
epoch: 0
release: 3.fc23
summary: Perl core test smoke suite
url: http://search.cpan.org/dist/Test-Smoke/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-02.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Smoke-1.60-3.fc23.src.rpm
checksum_type: sha256
description:
  The perl core test smoke suite is a set of scripts and modules that try to run
  the perl core tests on as many configurations as possible and combine the
  results into an easy to read report.


pkgId: 0f51275a9f4d656b4b413b9d5c62f7d86802066b1f2141968c696935bd4d49b0
name: perl-Test-Spec
arch: src
version: 0.51
epoch: 0
release: 1.fc23
summary: Write tests in a declarative specification style
url: http://search.cpan.org/dist/Test-Spec/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-18.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Spec-0.51-1.fc23.src.rpm
checksum_type: sha256
description:
  This is a declarative specification-style testing system for behavior-driven
  development (BDD) in Perl. The tests (a.k.a. examples) are named with strings
  instead of subroutine names, so your fingers will suffer less fatigue from
  underscore-itis, with the side benefit that the test reports are more legible.


pkgId: 718f7139a1aeb5b74b7f299bb05cd1aa8bcdbdcf1320e48210f90f0b36568b0a
name: perl-Test-Spelling
arch: src
version: 0.20
epoch: 0
release: 3.fc23
summary: Check for spelling errors in POD files
url: http://search.cpan.org/dist/Test-Spelling/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-27.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Spelling-0.20-3.fc23.src.rpm
checksum_type: sha256
description:
  "Test::Spelling" lets you check the spelling of a POD file, and report
  its results in standard "Test::Simple" fashion. This module requires the
  hunspell program.


pkgId: 918e0cbf2c5965ecc41fd9a91c54427617dde78134dfa585dd448d2adcb21048
name: perl-Test-Strict
arch: src
version: 0.27
epoch: 0
release: 3.fc23
summary: Check syntax, presence of use strict/warnings, and test coverage
url: http://search.cpan.org/dist/Test-Strict
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-16.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Strict-0.27-3.fc23.src.rpm
checksum_type: sha256
description:
  "Test::Strict" lets you check the syntax, presence of "use strict;" and
  "use warnings;" in your perl code.  It reports its results in standard
  "Test::Simple" fashion.


pkgId: 3ce94f64da2f5272e99126f58775535922092a7c89c0bba965ad9c61c946fb40
name: perl-Test-SubCalls
arch: src
version: 1.09
epoch: 0
release: 23.fc23
summary: Track the number of times subs are called
url: http://search.cpan.org/dist/Test-SubCalls/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder21.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-SubCalls-1.09-23.fc23.src.rpm
checksum_type: sha256
description:
  There is a number of different situations (like testing caching code) where
  you want to do a number of tests, and then verify that some underlying
  subroutine deep within the code was called a specific number of times.


pkgId: 63c7e109792caf12936b6fd15d5f5fe1bdd94578e4d6e7a131586a00017e47c6
name: perl-Test-Synopsis
arch: src
version: 0.11
epoch: 0
release: 4.fc23
summary: Test your SYNOPSIS code
url: http://search.cpan.org/dist/Test-Synopsis/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-12.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Synopsis-0.11-4.fc23.src.rpm
checksum_type: sha256
description:
  Test::Synopsis is an (author) test module to find .pm or .pod files under your
  lib directory and then make sure the example snippet code in your SYNOPSIS
  section passes the perl compile check.

  Note that this module only checks the perl syntax (by wrapping the code with
  sub) and doesn't actually run the code.


pkgId: bba041e91ab6685a5d040ca67755b5f0f44cf4d372230dcbcdc59d4618362094
name: perl-Test-Taint
arch: src
version: 1.06
epoch: 0
release: 10.fc23
summary: Tools to test taintedness
url: http://search.cpan.org/dist/Test-Taint/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder12.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Taint-1.06-10.fc23.src.rpm
checksum_type: sha256
description:
  Tainted data is data that comes from an unsafe source, such as the command
  line, or, in the case of web apps, any GET or POST transactions. Read the
  perlsec man page for details on why tainted data is bad, and how to untaint
  the data.

  When you're writing unit tests for code that deals with tainted data, you'll
  want to have a way to provide tainted data for your routines to handle, and
  easy ways to check and report on the taintedness of your data, in standard
  Test::More style.


pkgId: 2d6c173f0ed0546da55298baef56278187b9eac99412968cd850bd09d9b9b911
name: perl-Test-TinyMocker
arch: src
version: 0.05
epoch: 0
release: 5.fc23
summary: A very simple tool to mock external modules
url: http://search.cpan.org/dist/Test-TinyMocker/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder07.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-TinyMocker-0.05-5.fc23.src.rpm
checksum_type: sha256
description:
  This module allows you to override methods with arbitrary code blocks. This lets
  you simulate some kind of behavior for your tests.


pkgId: c76f37b17e892fe94acb748dabd5f44b0720dabae1d904be5885627be97cd99b
name: perl-Test-Trap
arch: src
version: 0.3.2
epoch: 0
release: 3.fc23
summary: Trap exit codes, exceptions, output, etc
url: http://search.cpan.org/dist/Test-Trap/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm04-builder19.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Trap-0.3.2-3.fc23.src.rpm
checksum_type: sha256
description:
  Primarily (but not exclusively) for use in test scripts: A block eval on
  steroids, configurable and extensible, but by default trapping (Perl)
  STDOUT, STDERR, warnings, exceptions, would-be exit codes, and return
  values from boxed blocks of test code.


pkgId: 924ba5587889e2af6f5ca0ed039ea0c06fef725463af76136a97e946d7a44998
name: perl-Test-Unit
arch: src
version: 0.25
epoch: 0
release: 22.fc23
summary: The PerlUnit testing framework
url: http://perlunit.sourceforge.net/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-12.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Unit-0.25-22.fc23.src.rpm
checksum_type: sha256
description:
  This framework is intended to support unit testing in an object-oriented
  development paradigm (with support for inheritance of tests etc.) and is
  derived from the JUnit testing framework for Java by Kent Beck and Erich
  Gamma.


pkgId: a7871c57763b8dd44250d415634c21509b065cde731eaff695bdb71ab783908b
name: perl-Test-Unit-Lite
arch: src
version: 0.12
epoch: 1
release: 22.fc23
summary: Unit testing without external dependencies
url: http://search.cpan.org/dist/Test-Unit-Lite/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder21.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Unit-Lite-0.12-22.fc23.src.rpm
checksum_type: sha256
description:
  This framework provides a lighter version of Test::Unit framework. It
  implements some of the Test::Unit classes and methods needed to run test
  units. Test::Unit::Lite tries to be compatible with public API of
  Test::Unit. It doesn't implement all classes and methods at 100% and only
  those necessary to run tests are available.


pkgId: a8acf739a0ad66cb5affe9c721f5d3a1fb86e5e525799033b24cf1e81f1738a8
name: perl-Test-Unit-Runner-Xml
arch: src
version: 0.1
epoch: 0
release: 18.fc23
summary: Generate XML reports from unit test results
url: http://search.cpan.org/dist/Test-Unit-Runner-Xml/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-25.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Unit-Runner-Xml-0.1-18.fc23.src.rpm
checksum_type: sha256
description:
  Test::Unit::Runner::XML generates XML reports from unit test results. The
  reports are in the same format as those produced by Ant's JUnit task, allowing
  them to be used with Java continuous integration and reporting tools.


pkgId: eae3f870377996a1ead125a8c94ae9116b299a828bf3a5a9ef15d4f3a11e21d6
name: perl-Test-UseAllModules
arch: src
version: 0.17
epoch: 0
release: 3.fc23
summary: Do use_ok() for all the MANIFESTed modules
url: http://search.cpan.org/dist/Test-UseAllModules/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder18.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-UseAllModules-0.17-3.fc23.src.rpm
checksum_type: sha256
description:
  I'm sick of writing 00_load.t (or something like that) that will do use_ok()
  for every module I write. I'm sicker of updating 00_load.t when I add
  another file to the distribution. This module reads MANIFEST to find modules
  to be tested and does use_ok() for each of them. Now all you have to do is
  update MANIFEST. You don't have to modify the test any more (hopefully).


pkgId: 9993d987b1fee9b729eef1af08f999f8c8f4c94b200b7d6bc9488b45c740d8a7
name: perl-Test-Valgrind
arch: src
version: 1.14
epoch: 0
release: 6.fc23
summary: Generate suppressions, analyze and test any command with valgrind
url: http://search.cpan.org/dist/Test-Valgrind/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-08.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Valgrind-1.14-6.fc23.src.rpm
checksum_type: sha256
description:
  The Test::Valgrind::* API lets you run Perl code through the memcheck tool of
  the valgrind memory debugger, to test for memory errors and leaks. The
  Test::Valgrind module itself is a front-end to this API. If they aren't
  available yet, it will first generate suppressions for the current perl
  interpreter and store them in the portable flavor of
  ~/.perl/Test-Valgrind/suppressions/$VERSION. The actual run will then take
  place, and tests will be passed or failed according to the result of the
  analysis.

  The complete API is much more versatile than this. By declaring an appropriate
  Test::Valgrind::Command class, you can run any executable (that is, not only
  Perl scripts) under valgrind, generate the corresponding suppressions
  on-the-fly and convert the analysis result to TAP output so that it can be
  incorporated into your project's test suite. If you're not interested in
  producing TAP, you can output the results in whatever format you like (for
  example HTML pages) by defining your own Test::Valgrind::Action class.


pkgId: 782deb76b9a56a8b9d8ca19ee9a8ac791f7caaf32a9ee3474a13fe5ffaf46e3d
name: perl-Test-Version
arch: src
version: 2.03
epoch: 0
release: 1.fc23
summary: Check to see that versions in modules are sane
url: http://search.cpan.org/dist/Test-Version/
rpm_license: Artistic 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-03.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Version-2.03-1.fc23.src.rpm
checksum_type: sha256
description:
  This module's goal is to be a one stop shop for checking to see that your
  versions across your dist are sane.


pkgId: 4c5dec2a1e7817305096a49a4d3571c5a694d8cccbfa48ea689b37ff9af52b38
name: perl-Test-WWW-Mechanize
arch: src
version: 1.44
epoch: 0
release: 9.fc23
summary: Testing-specific WWW::Mechanize subclass
url: http://search.cpan.org/dist/Test-WWW-Mechanize/
rpm_license: Artistic 2.0
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder16.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-WWW-Mechanize-1.44-9.fc23.src.rpm
checksum_type: sha256
description:
  Test::WWW::Mechanize is a subclass of WWW::Mechanize that incorporates
  features for web application testing.


pkgId: 2422722fdee15f0e3f7d108c06c03940048b2eeb885d2246e3e2b13699384866
name: perl-Test-WWW-Mechanize-CGIApp
arch: src
version: 0.05
epoch: 0
release: 19.fc23
summary: Test::WWW::Mechanize for CGI::Application
url: http://search.cpan.org/dist/Test-WWW-Mechanize-CGIApp/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm02-builder20.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-WWW-Mechanize-CGIApp-0.05-19.fc23.src.rpm
checksum_type: sha256
description:
  This package makes testing CGIApp based modules fast and easy. It takes
  advantage of Test::WWW::Mechanize to provide functions for common web
  testing scenarios.


pkgId: 771b4c5c1c4dedb8b9bd1b41a78dc38bab9da61d7b775900645d84525785783b
name: perl-Test-WWW-Mechanize-Catalyst
arch: src
version: 0.60
epoch: 0
release: 4.fc23
summary: Test::WWW::Mechanize for Catalyst
url: http://search.cpan.org/dist/Test-WWW-Mechanize-Catalyst/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm04-builder04.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-WWW-Mechanize-Catalyst-0.60-4.fc23.src.rpm
checksum_type: sha256
description:
  Catalyst is an elegant MVC Web Application Framework. Test::WWW::Mechanize
  is a subclass of WWW::Mechanize that incorporates features for web
  application testing. The Test::WWW::Mechanize::Catalyst module meshes the
  two to allow easy testing of Catalyst applications without starting up a
  web server.


pkgId: 9bb5b3b1042253063e0af12d2d3d1ba1fe305430e1d26e0b6dca0a61556b7c80
name: perl-Test-WWW-Mechanize-PSGI
arch: src
version: 0.35
epoch: 0
release: 13.fc23
summary: Test PSGI programs using WWW::Mechanize
url: http://search.cpan.org/dist/Test-WWW-Mechanize-PSGI/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder08.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-WWW-Mechanize-PSGI-0.35-13.fc23.src.rpm
checksum_type: sha256
description:
  PSGI is a specification to decouple web server environments from web
  application framework code. Test::WWW::Mechanize is a subclass of
  WWW::Mechanize that incorporates features for web application testing. The
  Test::WWW::Mechanize::PSGI module meshes the two to allow easy testing of
  PSGI applications.


pkgId: 2c4441d4e422e193f8cead2d62281d695dde046eeed06c20d5a3b68868d0c32f
name: perl-Test-WWW-Selenium
arch: src
version: 1.36
epoch: 0
release: 5.fc23
summary: Perl Client for the Selenium Remote Control test tool
url: http://search.cpan.org/dist/Test-WWW-Selenium/
rpm_license: (GPL+ or Artistic) and ASL 2.0
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder19.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-WWW-Selenium-1.36-5.fc23.src.rpm
checksum_type: sha256
description:
  Selenium Remote Control (SRC) is a test tool that allows you to write
  automated web application UI tests in any programming language against any
  HTTP website using any mainstream JavaScript-enabled browser. SRC provides
  a Selenium Server, which can automatically start/stop/control any supported
  browser. It works by using Selenium Core, a pure-HTML+JS library that
  performs automated tasks in JavaScript; the Selenium Server communicates
  directly with the browser using AJAX (XmlHttpRequest).


pkgId: 9c30332994f60724534f6a36ef8d65e07a0f94b6e50e6fef3c30207b00eec618
name: perl-Test-Warnings
arch: src
version: 0.021
epoch: 0
release: 3.fc23
summary: Test for warnings and the lack of them
url: http://search.cpan.org/dist/Test-Warnings
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-17.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Warnings-0.021-3.fc23.src.rpm
checksum_type: sha256
description:
  If you've ever tried to use Test::NoWarnings to confirm there are no warnings
  generated by your tests, combined with the convenience of done_testing to not
  have to declare a test count, you'll have discovered that these two features do
  not play well together, as the test count will be calculated before the
  warnings test is run, resulting in a TAP error (see examples/test_nowarnings.pl
  in this distribution for a demonstration).

  This module is intended to be used as a drop-in replacement for
  Test::NoWarnings: it also adds an extra test, but runs this test before
  done_testing calculates the test count, rather than after. It does this by
  hooking into done_testing as well as via an END block. You can declare a plan,
  or not, and things will still Just Work.

  It is actually equivalent to:

      use Test::NoWarnings 1.04 ':early';

  as warnings are still printed normally as they occur. You are safe, and
  enthusiastically encouraged, to perform a global search-replace of the above
  with use Test::Warnings; whether or not your tests have a plan.


pkgId: 2e904d03da90a42d0fb7bbdd783bc0bb01d771d872273bae0d138bd8fd9d84b0
name: perl-Test-Without-Module
arch: src
version: 0.18
epoch: 0
release: 4.fc23
summary: Test fallback behavior in absence of modules
url: http://search.cpan.org/dist/Test-Without-Module/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-11.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-Without-Module-0.18-4.fc23.src.rpm
checksum_type: sha256
description:
  This module allows you to deliberately hide modules from a program even
  though they are installed. This is mostly useful for testing modules that
  have a fallback when a certain dependency module is not installed.


pkgId: 07b85e8d6cc71c2e1f11701b9d157c4e226d1849c388bfb280de7ee74d2ad781
name: perl-Test-XML
arch: src
version: 0.08
epoch: 0
release: 4.fc23
summary: Compare XML in perl tests
url: http://search.cpan.org/dist/Test-XML/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-03.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-XML-0.08-4.fc23.src.rpm
checksum_type: sha256
description:
  This module contains generic XML testing tools. Functions include:

  is_xml(GOT, EXPECTED [, TESTNAME ])

    This function compares GOT and EXPECTED, both of which are strings of XML.
    The comparison works semantically and will ignore differences in syntax
    that are meaningless in xml, such as different quote characters for
    attributes, order of attributes or empty tag styles. It returns true or
    false, depending upon test success.

  isnt_xml(GOT, MUST_NOT_BE [, TESTNAME ])

    This function is similiar to is_xml(), except that it will fail if GOT and
    MUST_NOT_BE are identical.

  is_well_formed_xml(XML [, TESTNAME ])

    This function determines whether or not a given XML string is parseable as
    XML.

  is_good_xml(XML [, TESTNAME ])

      This is an alias for is_well_formed_xml().


pkgId: f9a501ee3da8ce17bcca36079c0f85dae037ac27391ecae30ae6659cac421b68
name: perl-Test-YAML-Meta
arch: src
version: 0.22
epoch: 0
release: 3.fc23
summary: Validation of the META.yml file in a distribution
url: http://search.cpan.org/dist/Test-YAML-Meta/
rpm_license: Artistic 2.0
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-25.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Test-YAML-Meta-0.22-3.fc23.src.rpm
checksum_type: sha256
description:
  This module was written to ensure that a META.yml file, provided with a
  standard distribution uploaded to CPAN, meets the specifications that are
  slowly being introduced to module uploads, via the use of
  ExtUtils::MakeMaker, Module::Build and Module::Install.


pkgId: 7ecaadde42e3ccadfb524ffda58322a0545f607ac3669f04f113c746bf3bae02
name: perl-TestML
arch: src
version: 0.52
epoch: 0
release: 3.fc23
summary: Generic software Testing Meta Language
url: http://search.cpan.org/dist/TestML/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-17.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-TestML-0.52-3.fc23.src.rpm
checksum_type: sha256
description:
  TestML <http://www.testml.org/> is a generic, programming language agnostic,
  meta language for writing unit tests. The idea is that you can use the same
  test files in multiple implementations of a given programming idea. Then you
  can be more certain that your application written in, say, Python matches your
  Perl implementation.

  In a nutshell you write a bunch of data tests that have inputs and expected
  results. Using a simple syntax, you specify what functions the data must pass
  through to produce the expected results. You use a bridge class to write the
  data functions that pass the data through your application.

  In Perl 5, TestML module is the evolution of the Test::Base module. It has
  a superset of Test:Base's goals. The data markup syntax is currently exactly
  the same as Test::Base.


pkgId: a6f6fe8951735c4076ab9cb429f033691b3f12fe4e3bb774af5d4e2e15c63601
name: perl-Text-ASCIITable
arch: src
version: 0.20
epoch: 0
release: 11.fc23
summary: Create a nice formatted table using ASCII characters
url: http://search.cpan.org/dist/Text-ASCIITable/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder07.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-ASCIITable-0.20-11.fc23.src.rpm
checksum_type: sha256
description:
  Pretty nifty if you want to output dynamic text to your console or other
  fixed-size-font displays, and at the same time it will display it in a nice
  human-readable, or "cool" way.


pkgId: 339d805df11acc39791cae76e6a98757d8dc626a2034ffd7cb069bb15c2ff3ee
name: perl-Text-Aligner
arch: src
version: 0.12
epoch: 0
release: 3.fc23
summary: Text::Aligner Perl module
url: http://search.cpan.org/dist/Text-Aligner/
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder14.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Aligner-0.12-3.fc23.src.rpm
checksum_type: sha256
description:
  Text::Aligner exports a single function, align(), which is used to justify
  strings to various alignment styles. The alignment specification is the
  first argument, followed by any number of scalars which are subject to
  alignment.


pkgId: ae5d6a7055627a49a437ab661f367e87dfb6628d271eefed3b40e3a50b1b63a0
name: perl-Text-Aspell
arch: src
version: 0.09
epoch: 0
release: 22.fc23
summary: Perl interface to the GNU Aspell library
url: http://search.cpan.org/dist/Text-Aspell/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder20.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Aspell-0.09-22.fc23.src.rpm
checksum_type: sha256
description:
  This module provides a Perl interface to the GNU Aspell library.  This
  module is to meet the need of looking up many words, one at a time, in a
  single session, such as spell-checking a document in memory.


pkgId: 99ef48322a6f9e1bf907695f355f7411ab8bb5e6858193b8bdf2d05adb63bc25
name: perl-Text-Autoformat
arch: src
version: 1.720000
epoch: 0
release: 2.fc23
summary: Automatic text wrapping and reformatting
url: http://search.cpan.org/dist/Text-Autoformat/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder20.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Autoformat-1.720000-2.fc23.src.rpm
checksum_type: sha256
description:
  Text::Autoformat provides intelligent formatting of plain text without the
  need for any kind of embedded mark-up. The module recognizes Internet
  quoting conventions, a wide range of bulleting and number schemes, centered
  text, and block quotations, and reformats each appropriately. Other options
  allow the user to adjust inter-word and inter-paragraph spacing, justify
  text, and impose various capitalization schemes.

  The module also supplies a re-entrant, highly configurable replacement for
  the built-in Perl format() mechanism.


pkgId: 8e3ee5f3b1382b24c9b8ae84260b8af41ed4114793ce6140adb2ca0bd51e2398
name: perl-Text-Balanced
arch: src
version: 2.03
epoch: 0
release: 348.fc23
summary: Extract delimited text sequences from strings
url: http://search.cpan.org/dist/Text-Balanced/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-11.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Balanced-2.03-348.fc23.src.rpm
checksum_type: sha256
description:
  These Perl subroutines may be used to extract a delimited substring, possibly
  after skipping a specified prefix string.


pkgId: 5061345846be2ebe22f02e54c32f4a4e5ac0e43087e8fd309c6cf0a19aa1ed70
name: perl-Text-BibTeX
arch: src
version: 0.71
epoch: 0
release: 3.fc23
summary: Interface to read and parse BibTeX files
url: http://search.cpan.org/dist/Text-BibTeX/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder21.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-BibTeX-0.71-3.fc23.src.rpm
checksum_type: sha256
description:
  The Text::BibTeX module processes BibTeX data.  It includes object-oriented
  interfaces to both BibTeX database files and individual bibliographic
  entries, as well as other miscellaneous functions.


pkgId: 8b196f95f80a86aa1f2d88278c6d73f6348a5cd2aef4d1ecfc33495b547e3b40
name: perl-Text-CHM
arch: src
version: 0.01
epoch: 0
release: 22.fc23
summary: Perl extension for handling MS Compiled HtmlHelp Files
url: http://search.cpan.org/dist/Text-CHM
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder06.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-CHM-0.01-22.fc23.src.rpm
checksum_type: sha256
description:
  Text::CHM is a module that implements a (partial) support for handling MS
  Compiled HtmlHelp Files (chm files for short) via CHMLib.

  Text::CHM allows you to open chm files, get their filelist, get the content
  of each file and close them; at the moment, no write support is available.


pkgId: a7fe31c3b9ffe2ceedf5e9a0994c6a39047bf8f91c814a5c0d38e5ff6b10fc27
name: perl-Text-CSV
arch: src
version: 1.33
epoch: 0
release: 1.fc23
summary: Comma-separated values manipulator
url: http://search.cpan.org/dist/Text-CSV/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder17.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-CSV-1.33-1.fc23.src.rpm
checksum_type: sha256
description:
  Text::CSV provides facilities for the composition and decomposition of
  comma-separated values.  An instance of the Text::CSV class can combine
  fields into a CSV string and parse a CSV string into fields.

  The module accepts either strings or files as input and can utilize any
  user-specified characters as delimiters, separators, and escapes so it is
  perhaps better called ASV (anything separated values) rather than just CSV.


pkgId: 2d2dd3de65ab04b7dd8762483675fb5705b791b8b4d75cc39a694033ffc3df76
name: perl-Text-CSV-Separator
arch: src
version: 0.20
epoch: 0
release: 8.fc23
summary: Determine the field separator of a CSV file
url: http://search.cpan.org/dist/Text-CSV-Separator/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder10.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-CSV-Separator-0.20-8.fc23.src.rpm
checksum_type: sha256
description:
  This module provides a fast detection of the field separator character
  (also called field delimiter) of a CSV file, or more generally, of a
  character separated text file (also called delimited text file), and
  returns it ready to use in a CSV parser (e.g., Text::CSV_XS, Tie::CSV_File,
  or Text::CSV::Simple).


pkgId: 0885896d5ba46df65584b6b4035876c6c6ecdb688b5660b85a151c1ea026348f
name: perl-Text-CSV_XS
arch: src
version: 1.19
epoch: 0
release: 1.fc23
summary: Comma-separated values manipulation routines
url: http://search.cpan.org/dist/Text-CSV_XS/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder03.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-CSV_XS-1.19-1.fc23.src.rpm
checksum_type: sha256
description:
  Text::CSV provides facilities for the composition and decomposition of
  comma-separated values.  An instance of the Text::CSV class can combine
  fields into a CSV string and parse a CSV string into fields.


pkgId: e1ad835fc2b2b621adbc1721b0ecf94b2dfa78159581e459cf94bb4db3190a91
name: perl-Text-CharWidth
arch: src
version: 0.04
epoch: 0
release: 24.fc23
summary: Get number of occupied columns of a string on terminal
url: http://search.cpan.org/dist/Text-CharWidth/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder10.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-CharWidth-0.04-24.fc23.src.rpm
checksum_type: sha256
description:
  This is a module to provide equivalent feature as wcwidth(3) and
  wcswidth(3).  This also provides mblen(3) equivalent subroutine.


pkgId: 4096c6b0adfa6e8fc252687a65897d87e76727cbe1abc654d8824fcfe08bd10c
name: perl-Text-Clip
arch: src
version: 0.0014
epoch: 0
release: 4.fc23
summary: Clip and extract text in clipboard-like way
url: http://search.cpan.org/dist/Text-Clip/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-16.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Clip-0.0014-4.fc23.src.rpm
checksum_type: sha256
description:
  Text::Clip allows you to mark/slice up a piece of text. String matching (by
  regular expression, etc.) is used to place marks. The first mark lets you
  access the text preceding and following the mark. Subsequent marks allow
  you to slurp up the text "clipped" between the marks.


pkgId: f12537339b5075f7ae4ee1aa712d5b5696038315b37f55d50baa78d2ea618f42
name: perl-Text-Context
arch: src
version: 3.7
epoch: 0
release: 15.fc23
summary: Handle highlighting search result context snippets
url: http://search.cpan.org/dist/Text-Context/
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-10.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Context-3.7-15.fc23.src.rpm
checksum_type: sha256
description:
  Given a piece of text and some search terms, produces an object which
  locates the search terms in the message, extracts a reasonable-length
  string containing all the search terms, and optionally dumps the string out
  as HTML text with the search terms highlighted in bold.


pkgId: 740b11237eeedfc2be61413250ae20586a4a40df15a9bf0d1ba63afb74bdecf8
name: perl-Text-Context-EitherSide
arch: src
version: 1.4
epoch: 0
release: 17.fc23
summary: Get n words either side of search keywords
url: http://search.cpan.org/dist/Text-Context-EitherSide/
rpm_license: Artistic 2.0
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder16.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Context-EitherSide-1.4-17.fc23.src.rpm
checksum_type: sha256
description:
  Suppose you have a large piece of text - typically, say, a web page or a
  mail message. And now suppose you've done some kind of full-text search on
  that text for a bunch of keywords, and you want to display the context in
  which you found the keywords inside the body of the text.


pkgId: b02e56cc82a7963f742ca7928cdf4a789cab67f87f43a8d6371a73e1586c484b
name: perl-Text-Diff
arch: src
version: 1.43
epoch: 0
release: 1.fc23
summary: Perform diffs on files and record sets
url: http://search.cpan.org/dist/Text-Diff/
rpm_license: (GPL+ or Artistic) and (GPLv2+ or Artistic) and MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-02.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Diff-1.43-1.fc23.src.rpm
checksum_type: sha256
description:
  Text::Diff provides a basic set of services akin to the GNU diff utility.
  It is not anywhere near as feature complete as GNU diff, but it is better
  integrated with Perl and available on all platforms. It is often faster
  than shelling out to a system's diff executable for small files, and
  generally slower on larger files.


pkgId: 902c09d31cf9e618b40b88200a61ae270173c270f68a9f4bd68186a1063cde8e
name: perl-Text-Diff-HTML
arch: src
version: 0.07
epoch: 0
release: 5.fc23
summary: XHTML format for Text::Diff::Unified
url: http://search.cpan.org/dist/Text-Diff-HTML/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-08.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Diff-HTML-0.07-5.fc23.src.rpm
checksum_type: sha256
description:
  This class subclasses Text::Diff::Unified, a formatting class provided by
  the Text::Diff module, to add XHTML markup to the unified diff format. For
  details on the interface of the diff() function, see the Text::Diff
  documentation.


pkgId: a0d0657ff9c0226b214f4647c5e2607eaaa2c50e670f06eb5f06966e805292bf
name: perl-Text-Diff-Parser
arch: src
version: 0.1001
epoch: 0
release: 17.fc23
summary: Parse patch files containing unified and standard diffs
url: http://search.cpan.org/dist/Text-Diff-Parser/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-05.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Diff-Parser-0.1001-17.fc23.src.rpm
checksum_type: sha256
description:
  Text::Diff::Parser parses diff files and patches. It allows you to access
  the changes to a file in a standardized way, even if multiple patch
  formats are used.


pkgId: 2dd4e0cd72e3ba6de5df37886b34c27767f03509278e6545fd54a218bde82389
name: perl-Text-Emoticon
arch: src
version: 0.04
epoch: 0
release: 17.fc23
summary: Factory class for Yahoo! and MSN emoticons
url: http://search.cpan.org/dist/Text-Emoticon/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-16.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Emoticon-0.04-17.fc23.src.rpm
checksum_type: sha256
description:
  Text::Emoticon is a factory class to dispatch MSN/YIM emoticon set.
  It's made to become handy to be used in other applications like
  Kwiki/MT plugins.


pkgId: 59c42728ed71cf03eb41f11e0cf853ef29d6b7ed23b18519b938994ae262ea56
name: perl-Text-Emoticon-MSN
arch: src
version: 0.04
epoch: 0
release: 17.fc23
summary: Emoticon filter of MSN Messenger
url: http://search.cpan.org/dist/Text-Emoticon-MSN/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-23.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Emoticon-MSN-0.04-17.fc23.src.rpm
checksum_type: sha256
description:
  Text::Emoticon::MSN is a text filter that replaces text emoticons like
  ":-)", ";-P", etc. to the icons of MSN Messenger, detailed in
  http://messenger.msn.com/Resource/Emoticons.aspx


pkgId: 886c21963d8f4d1fa9b777fa1c5599570395a36601e3b3ae1a5ff5b8543aa4d9
name: perl-Text-FindIndent
arch: src
version: 0.10
epoch: 0
release: 13.fc23
summary: Heuristically determine the indent style
url: http://search.cpan.org/dist/Text-FindIndent/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-25.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-FindIndent-0.10-13.fc23.src.rpm
checksum_type: sha256
description:
  This is an experimental distribution that attempts to intuit the underlying
  indent "policy" for a text file (most likely a source code file).


pkgId: 9266f4c779faa2ad96e4d098865e5599458498258ece6da340bc576a738aec92
name: perl-Text-Format
arch: src
version: 0.59
epoch: 0
release: 6.fc23
summary: Various subroutines to format text
url: http://search.cpan.org/dist/Text-Format/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-11.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Format-0.59-6.fc23.src.rpm
checksum_type: sha256
description:
  The format routine will format under all circumstances even if the width isn't
  enough to contain the longest words. Text::Wrap will die under these
  circumstances, although I am told this is fixed. If columns is set to a small
  number and words are longer than that and the leading 'whitespace' than there
  will be a single word on each line. This will let you make a simple word list
  which could be indented or right aligned. There is a chance for croaking if you
  try to subvert the module. If you don't pass in text then the internal text is
  worked on, though not modified. Text::Format is meant for more powerful text
  formatting than Text::Wrap allows.


pkgId: 90aa09bdafa7f08dbf1aa24f327768183e28a388f609de6a49a3b5d6dd68d6b7
name: perl-Text-FormatTable
arch: src
version: 1.03
epoch: 0
release: 17.fc23
summary: Format text tables
url: http://search.cpan.org/dist/Text-FormatTable/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-06.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-FormatTable-1.03-17.fc23.src.rpm
checksum_type: sha256
description:
  Text::FormatTable renders simple tables as text. You pass to the
  constructor (new) a table format specification similar to LaTeX (e.g.
  r|l|5l|R|20L) and you call methods to fill the table data and insert rules.
  After the data is filled, you call the render method and the table gets
  formatted as text.


pkgId: 68e467d31152bbae9edbf357c34daf4412a4c684bb764cc20d95c915dee14c80
name: perl-Text-Glob
arch: src
version: 0.09
epoch: 0
release: 13.fc23
summary: Perl module to match globbing patterns against text
url: http://search.cpan.org/dist/Text-Glob/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-09.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Glob-0.09-13.fc23.src.rpm
checksum_type: sha256
description:
  Text::Glob implements glob(3) style matching that can be used to match
  against text, rather than fetching names from a file-system.  If you
  want to do full file globbing use the File::Glob module instead.


pkgId: f12795d1333a132f7fb73dc234ecf88b91eb5eb4b6e37746ae080b0f8633f335
name: perl-Text-Haml
arch: src
version: 0.990116
epoch: 0
release: 5.fc23
summary: Haml Perl implementation
url: http://search.cpan.org/dist/Text-Haml/
rpm_license: Artistic 2.0
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder20.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Haml-0.990116-5.fc23.src.rpm
checksum_type: sha256
description:
  Text::Haml implements the Haml
  http://haml-lang.com/docs/yardoc/file.HAML_REFERENCE.html
  specification.


pkgId: bd2a7cef2e3b2a53aa5733563de3758a8c9a0c61fe0c1f2d3b88aff723ab14b2
name: perl-Text-Hunspell
arch: src
version: 2.11
epoch: 0
release: 3.fc23
summary: Perl interface to the Hunspell library
url: http://search.cpan.org/dist/text_hunspell/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder04.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Hunspell-2.11-3.fc23.src.rpm
checksum_type: sha256
description:
  This module provides a Perl interface to the Hunspell library. This module
  is to meet the need of looking up many words, one at a time, in a single
  session, such as spell-checking a document in memory.


pkgId: 5b5852fbb5e73a167478c02c6d4768a8a8366f36b7984ca79ba4b207da7d81c4
name: perl-Text-Iconv
arch: src
version: 1.7
epoch: 0
release: 24.fc23
summary: Perl interface to iconv() codeset conversion function
url: http://search.cpan.org/dist/Text-Iconv/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder06.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Iconv-1.7-24.fc23.src.rpm
checksum_type: sha256
description:
  The Text::Iconv module provides a Perl interface to the iconv()
  function as defined by the Single UNIX Specification. The convert()
  method converts the encoding of characters in the input string from
  the fromcode codeset to the tocode codeset, and returns the result.
  Settings of fromcode and tocode and their permitted combinations are
  implementation-dependent. Valid values are specified in the system
  documentation.


pkgId: 0b5628527dd61ca8b083fe03fc5d3408569e987b222a31bf2377c6931858e045
name: perl-Text-Kakasi
arch: src
version: 2.04
epoch: 0
release: 27.fc23
summary: Kakasi library module for perl
url: http://search.cpan.org/~dankogai/
rpm_license: GPL+
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder19.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Kakasi-2.04-27.fc23.src.rpm
checksum_type: sha256
description:
  This module provides libkakasi interface for perl. libkakasi is a part
  of KAKASI.  KAKASI is the language processing filter to convert Kanji
  characters to Hiragana, Katakana or Romaji and may be helpful to read
  Japanese documents.
  More information about KAKASI is available at <http://kakasi.namazu.org/>.


pkgId: 93904a97db2d683dda8729173d18b46173b4c2bfaddee098c321d11d89da451d
name: perl-Text-Levenshtein
arch: src
version: 0.12
epoch: 0
release: 4.fc23
summary: Implementation of the Levenshtein edit distance
url: http://search.cpan.org/dist/Text-Levenshtein/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder11.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Levenshtein-0.12-4.fc23.src.rpm
checksum_type: sha256
description:
  This module implements the Levenshtein edit distance. The Levenshtein edit
  distance is a measure of the degree of proximity between two strings. This
  distance is the number of substitutions, deletions or insertions ("edits")
  needed to transform one string into the other one (and vice versa). When
  two strings have distance 0, they are the same. To learn more about the
  Levenshtein metric, have a look at the wikipedia page
  <http://en.wikipedia.org/wiki/Levenshtein_distance>.


pkgId: 2a1bc79a276d2d8045672332d1180debdbe88fc8c689b52d72db077be6ed4820
name: perl-Text-Markdown
arch: src
version: 1.000031
epoch: 0
release: 4.fc23
summary: Convert Markdown syntax to (X)HTML
url: http://search.cpan.org/dist/Text-Markdown/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-10.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Markdown-1.000031-4.fc23.src.rpm
checksum_type: sha256
description:
  Markdown is a text-to-HTML filter; it translates an easy-to-read /
  easy-to-write structured text format into HTML. Markdown's text format
  is most similar to that of plain text email, and supports features
  such as headers, *emphasis*, code blocks, blockquotes, and links.

  Markdown's syntax is designed not as a generic markup language, but
  specifically to serve as a front-end to (X)HTML. You can use
  span-level HTML tags anywhere in a Markdown document, and you can use
  block level HTML tags (like <div> and <table> as well).

  For more information about Markdown's syntax, see:

      http://daringfireball.net/projects/markdown/


pkgId: ce43b09ad1daed4320675d3afedab5cdf2fce5ce871623df3e1e682276b91e32
name: perl-Text-MultiMarkdown
arch: src
version: 1.000035
epoch: 0
release: 3.fc23
summary: Convert MultiMarkdown syntax to (X)HTML
url: http://search.cpan.org/dist/Text-MultiMarkdown/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-26.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-MultiMarkdown-1.000035-3.fc23.src.rpm
checksum_type: sha256
description:
  Markdown is a text-to-HTML filter; it translates an easy-to-read / easy-to-
  write structured text format into HTML. Markdown's text format is most
  similar to that of plain text email, and supports features such as headers,
  *emphasis*, code blocks, block quotes, and links.


pkgId: 21b09d92e1e03b015b36bd77e2ea33a5cb15fd722832fa1ccf6ad812318bfeb1
name: perl-Text-Ngram
arch: src
version: 0.15
epoch: 0
release: 3.fc23
summary: Ngram analysis of text
url: http://search.cpan.org/dist/Text-Ngram/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm04-builder08.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Ngram-0.15-3.fc23.src.rpm
checksum_type: sha256
description:
  n-Gram analysis is a field in textual analysis which uses sliding window
  character sequences in order to aid topic analysis, language determination
  and so on. The n-gram spectrum of a document can be used to compare and
  filter documents in multiple languages, prepare word prediction networks,
  and perform spelling correction.


pkgId: eb5b420d19507e66c2478f6f5b40c120be69acf4a8d2d6ef2a6cf903eb640c83
name: perl-Text-PDF
arch: src
version: 0.29a
epoch: 0
release: 18.fc23
summary: Module for manipulating PDF files
url: http://search.cpan.org/dist/Text-PDF
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-04.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-PDF-0.29a-18.fc23.src.rpm
checksum_type: sha256
description:
  This module allows interaction with existing PDF files directly. It
  includes various tools:

      pdfbklt   - make booklets out of existing PDF files
      pdfrevert - remove edits from a PDF file
      pdfstamp  - stamp text on each page of a PDF file


pkgId: 9587cfa96141a131104c37f0128e275dec26a5bcb659b81e35dd5840644c460c
name: perl-Text-ParseWords
arch: src
version: 3.30
epoch: 0
release: 346.fc23
summary: Parse text into an array of tokens or array of arrays
url: http://search.cpan.org/dist/Text-ParseWords/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-19.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-ParseWords-3.30-346.fc23.src.rpm
checksum_type: sha256
description:
  The nested_quotewords() and quotewords() functions accept a delimiter (which
  can be a regular expression) and a list of lines and then breaks those lines
  up into a list of words ignoring delimiters that appear inside quotes.
  quotewords() returns all of the tokens in a single long list, while
  nested_quotewords() returns a list of token lists corresponding to the
  elements of @lines. parse_line() does tokenizing on a single string. The
  quotewords() functions simply call &parse_line(), so if you're only splitting
  one line you can call parse_line() directly and save a function call.


pkgId: 104d916b835a178aa45aea7337093d5f859586d8976cc2a952fd919b239f129a
name: perl-Text-Patch
arch: src
version: 1.8
epoch: 0
release: 11.fc23
summary: Patches text with given patch
url: http://search.cpan.org/dist/Text-Patch/
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-06.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Patch-1.8-11.fc23.src.rpm
checksum_type: sha256
description:
  Text::Patch combines source text with given diff (difference) data. Diff
  data is produced by Text::Diff module or by the standard diff utility (man
  diff, see -u option).


pkgId: c062e10dbf650b41bc0841af520b4517d549dfb483740e7aa5aea5a02e904c9c
name: perl-Text-Quoted
arch: src
version: 2.09
epoch: 0
release: 3.fc23
summary: Extract the structure of a quoted mail message
url: http://search.cpan.org/dist/Text-Quoted/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-06.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Quoted-2.09-3.fc23.src.rpm
checksum_type: sha256
description:
  Text::Quoted examines the structure of some text which may contain multiple
  different levels of quoting, and turns the text into a nested data structure.


pkgId: 406414ed572a7efc35360483fd9dffec765fca17c0c0357e45801e92a87aeca7
name: perl-Text-RecordParser
arch: src
version: 1.6.5
epoch: 0
release: 3.fc23
summary: Read record-oriented files
url: http://search.cpan.org/dist/Text-RecordParser/
rpm_license: GPLv2
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder04.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-RecordParser-1.6.5-3.fc23.src.rpm
checksum_type: sha256
description:
  This module is for reading record-oriented data in a delimited text file.
  The most common example have records separated by newlines and fields
  separated by commas or tabs, but this module aims to provide a consistent
  interface for handling sequential records in a file however they may be
  delimited. Typically this data lists the fields in the first line of the
  file, in which case you should call bind_header to bind the field name (or
  not, and it will be called implicitly). If the first line contains data,
  you can still bind your own field names via bind_fields. Either way, you
  can then use many methods to get at the data as arrays or hashes.


pkgId: 4d44065387fec11a7a217a405907620d3ad650e5d1d4d7d9db131ae30606be4c
name: perl-Text-Reflow
arch: src
version: 1.10
epoch: 0
release: 1.fc23
summary: Perl module for reflowing text files using Knuth's paragraphing algorithm
url: http://search.cpan.org/dist/Text-Reflow/
rpm_license: GPLv3+ and (GPL+ or Artistic)
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm04-builder03.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Reflow-1.10-1.fc23.src.rpm
checksum_type: sha256
description:
  These routines will reflow the paragraphs in the given file, filehandle,
  string or array using Knuth's paragraphing algorithm (as used in TeX) to
  pick "good" places to break the lines.


pkgId: eb546c9cd043e9624b39276e079bb39ff671fc3f0f0015da76308049fd0dbf09
name: perl-Text-Reform
arch: src
version: 1.20
epoch: 0
release: 13.fc23
summary: Manual text wrapping and reformatting
url: http://search.cpan.org/dist/Text-Reform/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-11.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Reform-1.20-13.fc23.src.rpm
checksum_type: sha256
description:
  The module supplies a re-entrant, highly configurable replacement for the
  built-in Perl format() mechanism.


pkgId: cb30c682f6ed255bafa02a08d4607b02d9da9d045c4a71ebe553f73dc41b7ce2
name: perl-Text-Shellwords
arch: src
version: 1.08
epoch: 0
release: 22.fc23
summary: A thin wrapper around the shellwords.pl package
url: http://search.cpan.org/dist/Text-Shellwords/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder14.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Shellwords-1.08-22.fc23.src.rpm
checksum_type: sha256
description:
  This is a thin wrapper around the shellwords.pl package, which comes
  preinstalled with Perl.  This module imports a single subroutine,
  shellwords().  The shellwords() routine parses lines of text and
  returns a set of tokens using the same rules that the Unix shell does
  for its command-line arguments.  Tokens are separated by whitespace,
  and can be delimited by single or double quotes.  The module also
  respects backslash escapes.


pkgId: 525c99f8515cd1915dd5ad27d0409cf374d35a8f5033fdecc707dc169232283e
name: perl-Text-Smart
arch: src
version: 1.0.2
epoch: 0
release: 18.fc23
summary: Processor for 'smart text' markup
url: http://search.cpan.org/dist/Text-Smart/
rpm_license: GPLv2
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-23.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Smart-1.0.2-18.fc23.src.rpm
checksum_type: sha256
description:
  This module provides an interface for converting smarttext markup into an
  arbitrary text based markup language, such as HTML, Latex, or Troff.


pkgId: ce352a9eae75a19ae520a42d5ba417db62e4dcedbc0051d5634a18b126ea3878
name: perl-Text-Smart-Plugin
arch: src
version: 1.0.1
epoch: 0
release: 19.fc23
summary: Template Toolkit plugin for Text::Smart
url: http://search.cpan.org/dist/Text-Smart-Plugin/
rpm_license: GPLv2
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder16.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Smart-Plugin-1.0.1-19.fc23.src.rpm
checksum_type: sha256
description:
  This module provides a plugin for the Template-Toolkit to enable the use
  of 'smart text', whose syntax is defined by the Text::Smart module. See
  that module's manual pages for details of the markup allowed. See the
  synopsis section above for how to use this module in combination with the
  Template toolkit.


pkgId: b4c510b45c1dedfe8aaedf89a102363f0617019a219a5b436f5630052f2654f5
name: perl-Text-Soundex
arch: src
version: 3.04
epoch: 0
release: 296.fc23
summary: Implementation of the soundex algorithm
url: http://search.cpan.org/dist/Text-Soundex/
rpm_license: Copyright only
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder06.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Soundex-3.04-296.fc23.src.rpm
checksum_type: sha256
description:
  Soundex is a phonetic algorithm for indexing names by sound, as pronounced in
  English. This module implements the original soundex algorithm developed by
  Robert Russell and Margaret Odell, as well as a variation called "American
  Soundex".


pkgId: 5a6b20f82f366f237568c90752b979dcec670b1f80951c6afe4d8aa9c1cf63ad
name: perl-Text-SpellChecker
arch: src
version: 0.14
epoch: 0
release: 3.fc23
summary: OO interface for spell-checking a block of text
url: http://search.cpan.org/dist/Text-SpellChecker/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-09.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-SpellChecker-0.14-3.fc23.src.rpm
checksum_type: sha256
description:
  This module is a thin layer above Text::Hunspell and allows one to spellcheck
  a body of text. Whereas Text::Hunspell deals with words, Text::Spellchecker
  deals with blocks of text. For instance, we provide methods for iterating
  through the text, serializing the object (thus remembering where we left off),
  and highlighting the current misspelled word within the text.


pkgId: 5a908bfd31e960edd15c6af99afecc663f020cb2cca3e057f44680ee893a0f90
name: perl-Text-Sprintf-Named
arch: src
version: 0.0402
epoch: 0
release: 3.fc23
summary: Sprintf-like function with named conversions
url: http://search.cpan.org/dist/Text-Sprintf-Named/
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-09.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Sprintf-Named-0.0402-3.fc23.src.rpm
checksum_type: sha256
description:
  Text::Sprintf::Named provides a sprintf equivalent with named conversions.
  Named conversions are sprintf field specifiers (like "%s" or "%4d") only
  they are associated with the key of an associative array of parameters. So
  for example "%(name)s" will emit the 'name' parameter as a string, and
  "%(num)4d" will emit the 'num' parameter as a variable with a width of 4.


pkgId: c5668fc6304eb0c82d4a3ff70878d49f009141defbe4cbb79b0e15329cc849c9
name: perl-Text-Table
arch: src
version: 1.130
epoch: 0
release: 5.fc23
summary: Organize Data in Tables
url: http://search.cpan.org/dist/Text-Table/
rpm_license: ISC
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder17.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Table-1.130-5.fc23.src.rpm
checksum_type: sha256
description:
  Organization of data in table form is a time-honored and useful method of
  data representation. While columns of data are trivially generated by
  computer through formatted output, even simple tasks like keeping titles
  aligned with the data columns are not trivial, and the one-shot solutions
  one comes up with tend to be particularly hard to maintain. Text::Table
  allows you to create and maintain tables that adapt to alignment
  requirements as you use them.


pkgId: 24e777855dfb758aee11c3b1c7a6decc2aa2aad9e25e805e836eafd47328e32b
name: perl-Text-Tabs+Wrap
arch: src
version: 2013.0523
epoch: 0
release: 346.fc23
summary: Expand tabs and do simple line wrapping
url: http://search.cpan.org/dist/Text-Tabs%2BWrap/
rpm_license: TTWL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder02.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Tabs+Wrap-2013.0523-346.fc23.src.rpm
checksum_type: sha256
description:
  Text::Tabs performs the same job that the UNIX expand(1) and unexpand(1)
  commands do: adding or removing tabs from a document.

  Text::Wrap::wrap() will reformat lines into paragraphs. All it does is break
  up long lines, it will not join short lines together.


pkgId: e54f0b815357b4259770d050d04e2adff58086cc94bf31ab01b151b2b49a66a6
name: perl-Text-TabularDisplay
arch: src
version: 1.38
epoch: 0
release: 4.fc23
summary: Display text in formatted table output
url: http://search.cpan.org/dist/Text-TabularDisplay/
rpm_license: GPLv2
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-06.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-TabularDisplay-1.38-4.fc23.src.rpm
checksum_type: sha256
description:
  Text::TabularDisplay simplifies displaying textual data in a table. The
  output is identical to the columnar display of query results in the MySQL
  text monitor.


pkgId: a73ad569d98236e21d44951d7d3e90288bba7ee728146eed0f704b1d4c8c3143
name: perl-Text-Template
arch: src
version: 1.46
epoch: 0
release: 3.fc23
summary: Expand template text with embedded Perl
url: http://search.cpan.org/dist/Text-Template/
rpm_license: (GPL+ or Artistic) and (GPLv2+ or Artistic)
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder16.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Template-1.46-3.fc23.src.rpm
checksum_type: sha256
description:
  This is a library for generating form letters, building HTML pages, or
  filling in templates generally.  A 'template' is a piece of text that
  has little Perl programs embedded in it here and there.  When you
  'fill in' a template, you evaluate the little programs and replace
  them with their values.


pkgId: 7bc6c494902438272b78460f4d7c274e1e9795b12aeb06d1ccf6ebb6eeb94651
name: perl-Text-Textile
arch: src
version: 2.13
epoch: 0
release: 3.fc23
summary: A humane web text generator
url: http://search.cpan.org/dist/Text-Textile/
rpm_license: GPL+ or Artistic 2.0
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder08.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Textile-2.13-3.fc23.src.rpm
checksum_type: sha256
description:
  Text::Textile is a Perl-based implementation of Dean Allen's Textile syntax.
  Textile is shorthand for doing common formatting tasks.


pkgId: dd9a7ae6afd3933be99463e018d9515b9cc6710d8b4b648743feda85917389b7
name: perl-Text-Tree
arch: src
version: 1.0
epoch: 0
release: 20.fc23
summary: Format a simple tree of strings into a textual tree graph
url: http://search.cpan.org/dist/Text-Tree/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder21.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Tree-1.0-20.fc23.src.rpm
checksum_type: sha256
description:
  Allows the caller to develop a tree structure, using nested arrays of
  strings and references. Once developed, the whole tree can be printed as a
  diagram, with the root of the tree at the top, and child nodes formatted
  horizontally below them.


pkgId: 910be1c8ec8bce3828efa3db3248fa1474892d9f273d10aff992f551b90f7408
name: perl-Text-Unidecode
arch: src
version: 1.24
epoch: 0
release: 1.fc23
summary: US-ASCII transliterations of Unicode text
url: http://search.cpan.org/dist/Text-Unidecode/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-07.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Unidecode-1.24-1.fc23.src.rpm
checksum_type: sha256
description:
  Text::Unidecode provides a function, `unidecode(...)' that takes
  Unicode data and tries to represent it in US-ASCII characters (i.e.,
  the universally displayable characters between 0x00 and 0x7F). The
  representation is almost always an attempt at *transliteration* -- i.e.,
  conveying, in Roman letters, the pronunciation expressed by the text in
  some other writing system.


pkgId: 25efe60b2d96340f8ea202cdb98de2d84576a3ef6663f7a75ccf989ef86ef31c
name: perl-Text-VimColor
arch: src
version: 0.26
epoch: 0
release: 3.fc23
summary: Syntax color text in HTML or XML using Vim
url: http://search.cpan.org/dist/Text-VimColor/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-03.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-VimColor-0.26-3.fc23.src.rpm
checksum_type: sha256
description:
  This module tries to markup text files according to their syntax. It can be
  used to produce web pages with pretty-printed colorful source code samples.
  It can produce output in various formats. text-vimcolor is a command line
  interface to the Perl module Text::VimColor:
    text-vimcolor --format html --filetype prolog foo.pl > foo.html


pkgId: 2ad2d09f91de6c600a4af489f6a034535363cb52c0ac7dd9a41838c5e96f2a51
name: perl-Text-WagnerFischer
arch: src
version: 0.04
epoch: 0
release: 3.fc23
summary: Implementation of the Wagner-Fischer edit distance
url: http://search.cpan.org/dist/Text-WagnerFischer/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm04-builder06.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-WagnerFischer-0.04-3.fc23.src.rpm
checksum_type: sha256
description:
  This module implements the Wagner-Fischer dynamic programming technique,
  used here to calculate the edit distance of two strings. The edit distance
  is a measure of the degree of proximity between two strings, based on
  "edits": the operations of substitutions, deletions or insertions needed to
  transform the string into the other one (and vice versa).


pkgId: 1c9ca9b6be9b0247d14533d22863bdbb1244ea8c9fa052eebbb8b44fc591bf22
name: perl-Text-WikiFormat
arch: src
version: 0.81
epoch: 0
release: 3.fc23
summary: Translate Wiki formatted text into other formats
url: http://search.cpan.org/dist/Text-WikiFormat/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder12.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-WikiFormat-0.81-3.fc23.src.rpm
checksum_type: sha256
description:
  The original Wiki web site had a very simple interface to edit and to
  add pages.  Its formatting rules are simple and easy to use.  They are
  also easy to translate into other, more complicated markup languages
  with this module.  It creates HTML by default, but can produce valid
  POD, DocBook, XML, or any other format imaginable.


pkgId: e569fe3a73b0b622bd2354dc5f1bdc59c0aa0dbf09fdd251847c0ce3497c58a2
name: perl-Text-WordDiff
arch: src
version: 0.08
epoch: 0
release: 5.fc23
summary: Track changes between documents
url: http://search.cpan.org/dist/Text-WordDiff/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-09.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-WordDiff-0.08-5.fc23.src.rpm
checksum_type: sha256
description:
  This module is a variation on the lovely Text::Diff module. Rather than
  generating traditional line-oriented diffs, however, it generates word-
  oriented diffs. This can be useful for tracking changes in narrative
  documents or documents with very long lines. To diff source code, one is
  still best off using Text::Diff. But if you want to see how a short
  story changed from one version to the next, this module will do the job
  very nicely.


pkgId: a3aa0a211b6884356a60c2ec895dccfb6645634b2dc996f18c84d6a1c76981a0
name: perl-Text-WrapI18N
arch: src
version: 0.06
epoch: 0
release: 23.fc23
summary: Line wrapping with support for several locale setups
url: http://search.cpan.org/dist/Text-WrapI18N/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-07.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-WrapI18N-0.06-23.fc23.src.rpm
checksum_type: sha256
description:
  This is a module which intends to substitute Text::Wrap,
  which supports internationalized texts including:
   - multi-byte encodings such as UTF-8, EUC-JP, EUC-KR, GB2312, and Big5,
   - full width characters like east Asian characters which appear in
     UTF-8, EUC-JP, EUC-KR, GB2312, Big5, and so on,
   - combining characters like diacritical marks which appear in UTF-8,
     ISO-8859-11 (aka TIS-620), and so on, and
   - languages which don't use white spaces between words, like Chinese
     and Japanese.


pkgId: e52bebe8aca404f3ba8632a6ee8b39c63ee24212797b327a39c2775f1306548f
name: perl-Text-Wrapper
arch: src
version: 1.05
epoch: 0
release: 5.fc23
summary: Simple word wrapping perl module
url: http://search.cpan.org/dist/Text-Wrapper/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder19.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Wrapper-1.05-5.fc23.src.rpm
checksum_type: sha256
description:
  This module provides simple word wrapping.  It breaks long lines, but does
  not alter spacing or remove existing line breaks.  If you're looking for
  more sophisticated text formatting, try the Text::Format module.


pkgId: fc3c8a1c9f0f48820dccecacfc1296b069d6909ae3fd0c4d366a469c22d6560e
name: perl-Text-Xslate
arch: src
version: 3.3.4
epoch: 0
release: 1.fc23
summary: Scalable template engine
url: http://xslate.org/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm02-builder23.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-Xslate-3.3.4-1.fc23.src.rpm
checksum_type: sha256
description:
  Xslate is a template engine, tuned for persistent applications, safe as an
  HTML generator, and with rich features.


pkgId: 36265d612d350598110453dcbd460764726710994c4729631faba12bfe489847
name: perl-Text-vCard
arch: src
version: 2.07
epoch: 0
release: 15.fc23
summary: Package to edit and create a single vCard (RFC 2426)
url: http://search.cpan.org/dist/Text-vCard/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder14.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Text-vCard-2.07-15.fc23.src.rpm
checksum_type: sha256
description:
  vCards are electronic business cards used by various message user
  agents (MUAs) and defined in RFC 2426.  They are a simple and
  extensible representation for common contact information such as
  name, company, telephone, fax, address, email, etc. and some
  less common information such as IM or Googletalk handles.

  This package provides an interface for manipulating vCards.


pkgId: 7aee250b51b20c48933fcbd935f76475cbfb09fc808cefd1ccda95e1927b131d
name: perl-TheSchwartz
arch: src
version: 1.12
epoch: 0
release: 3.fc23
summary: Reliable job queue
url: http://search.cpan.org/dist/TheSchwartz/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm02-builder06.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-TheSchwartz-1.12-3.fc23.src.rpm
checksum_type: sha256
description:
  TheSchwartz is a reliable job queue system. Your application can put jobs
  into the system and your worker processes can pull jobs from the queue
  atomically to perform. Failed jobs can be left in the queue to retry later.


pkgId: 333e3fd714df39396039c7ae4a927711b3869e0704ca2e981fc111ab08f27bd1
name: perl-Thread-SigMask
arch: src
version: 0.004
epoch: 0
release: 6.fc23
summary: Thread specific signal masks
url: http://search.cpan.org/dist/Thread-SigMask/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder06.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Thread-SigMask-0.004-6.fc23.src.rpm
checksum_type: sha256
description:
  This module provides per-thread signal masks. On non-threaded perls it will
  be effectively the same as POSIX::sigprocmask. The interface works exactly
  the same as sigprocmask.


pkgId: ca4d638ad02b26cdab4f1d38b0dad87a16920832485f1dc0809be5c2d3d5bf57
name: perl-Throwable
arch: src
version: 0.200013
epoch: 0
release: 1.fc23
summary: Role for classes that can be thrown
url: http://search.cpan.org/dist/Throwable/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-06.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Throwable-0.200013-1.fc23.src.rpm
checksum_type: sha256
description:
  Throwable is a role for classes that are meant to be thrown as exceptions
  to standard program flow. It is very simple and does only two things: saves
  any previous value for $@ and calls die $self.


pkgId: c9d6924cfb8f2bba047077e96140302a5d92a88a624e226fbb93973a95a20c22
name: perl-Tie-Cache
arch: src
version: 0.21
epoch: 0
release: 4.fc23
summary: LRU Cache in Memory
url: http://search.cpan.org/dist/Tie-Cache/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder20.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Tie-Cache-0.21-4.fc23.src.rpm
checksum_type: sha256
description:
  This module implements a least recently used (LRU) cache in memory
  through a tie interface. Any time data is stored in the tied hash,
  that key/value pair has an entry time associated with it, and as
  the cache fills up, those members of the cache that are the oldest
  are removed to make room for new entries.


pkgId: edbe6cecb94caa35445ef0ff4cf7c3910d25e1ece6e1480c3f2753c962768952
name: perl-Tie-Cycle
arch: src
version: 1.21
epoch: 0
release: 3.fc23
summary: Cycle through a list of values via a scalar
url: http://search.cpan.org/dist/Tie-Cycle/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder07.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Tie-Cycle-1.21-3.fc23.src.rpm
checksum_type: sha256
description:
  This Perl module can be used to go through a list over and over again.
  Once you get to the end of the list, you go back to the beginning.  You
  do not have to worry about any of this since the magic of tie does that
  for you.


pkgId: 12fac23eb93fb37e25c1e0114d5dbb795cedf53ff025cf80ebe2f05443652a86
name: perl-Tie-DBI
arch: src
version: 1.06
epoch: 0
release: 3.fc23
summary: Tie hashes to DBI relational databases
url: http://search.cpan.org/dist/Tie-DBI/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder03.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Tie-DBI-1.06-3.fc23.src.rpm
checksum_type: sha256
description:
  This distribution contains Tie::DBI and Tie::RDBM, two modules that
  allow you to tie associative arrays to relational databases using the
  DBI library.  The hash is tied to a table in a local or networked
  database.  Reading from the hash retrieves values from the database.
  Storing into the hash updates the database (if you have sufficient
  privileges).


pkgId: e9d08dc66aeda1e17977911bf75492409ba7604155a177c1fae2b5f757ae1d01
name: perl-Tie-EncryptedHash
arch: src
version: 1.24
epoch: 0
release: 18.fc23
summary: Hashes (and objects based on hashes) with encrypting fields
url: http://search.cpan.org/dist/Tie-EncryptedHash/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-10.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Tie-EncryptedHash-1.24-18.fc23.src.rpm
checksum_type: sha256
description:
  Tie::EncryptedHash augments Perl hash semantics to build secure, encrypting
  containers of data. Tie::EncryptedHash introduces special hash fields that are
  coupled with encrypt/decrypt routines to encrypt assignments at STORE() and
  decrypt retrievals at FETCH(). By design, encrypting fields are associated with
  keys that begin in single underscore. The remaining keyspace is used for
  accessing normal hash fields, which are retained without modification.

  While the password is set, a Tie::EncryptedHash behaves exactly like a standard
  Perl hash. This is its transparent mode of access. Encrypting and normal fields
  are identical in this mode. When password is deleted, encrypting fields are
  accessible only as ciphertext. This is Tie::EncryptedHash's opaque mode of
  access, optimized for serialization.

  Encryption is done with Crypt::CBC(3), which encrypts in the cipher block
  chaining mode with Blowfish, DES or IDEA. Tie::EncryptedHash uses Blowfish by
  default, but can be instructed to employ any cipher supported by Crypt::CBC(3).


pkgId: 6064ddebf71c8a012e38bf9c650b4744cdbba3a14877e272407e81115c9245a2
name: perl-Tie-Function
arch: src
version: 0.02
epoch: 0
release: 7.fc23
summary: Wrap functions in tied hash sugar
url: http://search.cpan.org/dist/Tie-Function/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-07.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Tie-Function-0.02-7.fc23.src.rpm
checksum_type: sha256
description:
  Tie::Function simplifies wrapping functions in tied hash syntax so they can
  be interpolated in double-quoted literals without messy intermediate
  variables.


pkgId: ff67b1ce31ca6b11cd6b698289010ac6b9b73e66c9044072b0adf0eb66892264
name: perl-Tie-IxHash
arch: src
version: 1.23
epoch: 0
release: 4.fc23
summary: Ordered associative arrays for Perl
url: http://search.cpan.org/dist/Tie-IxHash/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder10.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Tie-IxHash-1.23-4.fc23.src.rpm
checksum_type: sha256
description:
  This Perl module implements Perl hashes that preserve the order in
  which the hash elements were added. The order is not affected when
  values corresponding to existing keys in the IxHash are changed.
  The elements can also be set to any arbitrary supplied order. The
  familiar perl array operations can also be performed on the IxHash.


pkgId: 40081cea0fae080da92e901ffd215a00c0b5e32c0a9861cf978a63072e738129
name: perl-Tie-RefHash-Weak
arch: src
version: 0.09
epoch: 0
release: 19.fc23
summary: Tie::RefHash subclass with weakened references in the keys
url: http://search.cpan.org/dist/Tie-RefHash-Weak/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-09.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Tie-RefHash-Weak-0.09-19.fc23.src.rpm
checksum_type: sha256
description:
  The Tie::RefHash module can be used to access hashes by reference. This is
  useful when you index by object, for example.


pkgId: 1fd9620c93b92947b9197c75281cb49f584982df624bc8587dcbe843df50a01a
name: perl-Tie-Simple
arch: src
version: 1.03
epoch: 0
release: 11.fc23
summary: Variable ties made easier: much, much, much easier
url: http://search.cpan.org/dist/Tie-Simple/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-04.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Tie-Simple-1.03-11.fc23.src.rpm
checksum_type: sha256
description:
  This module adds the ability to quickly create new types of tie objects
  without creating a complete class. It does so in such a way as to try and
  make the programmers life easier when it comes to single-use ties that I
  find myself wanting to use from time-to-time.


pkgId: 481bb2f129412b8db56b6b30a5019c9a7e62d85b010e030bbae6bfa192d14fe0
name: perl-Tie-ToObject
arch: src
version: 0.03
epoch: 0
release: 21.fc23
summary: Tie to an existing object
url: http://search.cpan.org/dist/Tie-ToObject
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder04.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Tie-ToObject-0.03-21.fc23.src.rpm
checksum_type: sha256
description:
  While the perldoc/tie manpage allows tying to an arbitrary object, the
  class in question must support this in it's implementation of 'TIEHASH',
  'TIEARRAY' or whatever.

  This class provides a very tie constructor that simply returns the object
  it was given as it's first argument.

  This way side effects of calling '$object->TIEHASH' are avoided.


pkgId: a62d9cac0b0366a01f622a337f7768ec59ace8ff7434d9974007c7576a93dbbd
name: perl-Time-Clock
arch: src
version: 1.03
epoch: 0
release: 5.fc23
summary: Twenty-four hour clock object with nanosecond precision
url: http://search.cpan.org/dist/Time-Clock/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder20.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Time-Clock-1.03-5.fc23.src.rpm
checksum_type: sha256
description:
  A Time::Clock object is a twenty-four hour clock with nanosecond precision
  and wrap-around. It is a clock only; it has absolutely no concept of dates.
  Vagaries of date/time such as leap seconds and daylight savings time are
  unsupported.


pkgId: 0e01fdfd9ad633d3ea3c2d66ab39b927dbd08da9fd3fd20d984b0f6ea426f879
name: perl-Time-Duration-Parse
arch: src
version: 0.12
epoch: 0
release: 1.fc23
summary: Parse string that represents time duration
url: http://search.cpan.org/dist/Time-Duration-Parse
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder13.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Time-Duration-Parse-0.12-1.fc23.src.rpm
checksum_type: sha256
description:
  Time::Duration::Parse is a module to parse human readable duration strings
  like "2 minutes and 3 seconds" to seconds. It does the opposite of
  duration_exact() in Time::Duration and is roundtrip safe.


pkgId: a88edab6b9d96f4e8bb77ed56baaa8dbc9fa48eae958f5cd4c53cc11d8412dee
name: perl-Time-HiRes
arch: src
version: 1.9726
epoch: 0
release: 346.fc23
summary: High resolution alarm, sleep, gettimeofday, interval timers
url: http://search.cpan.org/dist/Time-HiRes/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder19.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Time-HiRes-1.9726-346.fc23.src.rpm
checksum_type: sha256
description:
  The Time::HiRes module implements a Perl interface to the usleep, nanosleep,
  ualarm, gettimeofday, and setitimer/getitimer system calls, in other words,
  high resolution time and timers.


pkgId: 869c6eaca37027292b8197e63582a5dd56510fb01264d48703b9983aa3a62870
name: perl-Time-Interval
arch: src
version: 1.232
epoch: 0
release: 7.fc23
summary: Perl module that converts time intervals of days, hours, minutes, and seconds
url: http://search.cpan.org/dist/Time-Interval
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-06.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Time-Interval-1.232-7.fc23.src.rpm
checksum_type: sha256
description:
  This is a rather simple perl module for dealing with time intervals. Among
  other things, this module can tell you the number of hours, minutes, and
  seconds elapsed between two dates.


pkgId: 2198b8f9189c0b6b717d974fd87ebb69e737eb0d4168cb9488668791d2ce02df
name: perl-Time-Local
arch: src
version: 1.2300
epoch: 0
release: 346.fc23
summary: Efficiently compute time from local and GMT time
url: http://search.cpan.org/dist/Time-Local/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder07.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Time-Local-1.2300-346.fc23.src.rpm
checksum_type: sha256
description:
  This module provides functions that are the inverse of built-in perl functions
  localtime() and gmtime(). They accept a date as a six-element array, and
  return the corresponding time(2) value in seconds since the system epoch
  (Midnight, January 1, 1970 GMT on Unix, for example). This value can be
  positive or negative, though POSIX only requires support for positive values,
  so dates before the system's epoch may not work on all operating systems.


pkgId: 2c67380016112230d4ae5df29b58745175174f36d72643c961b24b4d9301bea2
name: perl-Time-Mock
arch: src
version: 0.0.2
epoch: 0
release: 8.fc23
summary: Replaces actual time with simulated time - alternative to Test::MockTime
url: http://search.cpan.org/dist/Time-Mock/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder03.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Time-Mock-0.0.2-8.fc23.src.rpm
checksum_type: sha256
description:
  This is an alternative to Test::MockTime which enables test suites to
  test code at specific points in time. Test::MockTime is nice, but doesn't
  allow you to accelerate the time step and doesn't deal with Time::HiRes or
  give you any way to change the time across forks.


pkgId: dc633129a15784ed6683fac5030fb8600d28ebfd131e25115d6420820acd944b
name: perl-Time-OlsonTZ-Download
arch: src
version: 0.004
epoch: 0
release: 8.fc23
summary: Olson timezone database from source
url: http://search.cpan.org/dist/Time-OlsonTZ-Download/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-17.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Time-OlsonTZ-Download-0.004-8.fc23.src.rpm
checksum_type: sha256
description:
  An object of this class represents a local copy of the source of the Olson
  timezone database, possibly used to build binary tzfiles. The source copy
  always begins by being downloaded from the canonical repository of the
  Olson database. This class provides methods to help with extracting useful
  information from the source.


pkgId: cf9a2486142fb3d3d6ce76ceeb6943a0aeb7859c9a85a3efd883eddc2a854815
name: perl-Time-ParseDate
arch: src
version: 2013.1113
epoch: 0
release: 5.fc23
summary: Perl modules for parsing dates and times
url: http://search.cpan.org/dist/Time-ParseDate/
rpm_license: TPDL and Public Domain
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder08.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Time-ParseDate-2013.1113-5.fc23.src.rpm
checksum_type: sha256
description:
  Time-ParseDate provides several Perl modules, including Time::CTime,
  Time::DaysInMonth, Time::JulianDay, Time::ParseDate, and Time::Timezone.
  These modules can be useful for parsing and manipulating dates and times.
  There are numerous options to control what is recognized and what is not.


pkgId: 589b027fe1425898b90e8fa7c73de0d0fa9b475ad9306842ea79a89ebff22d70
name: perl-Time-Piece-MySQL
arch: src
version: 0.05
epoch: 0
release: 24.fc23
summary: MySQL-specific methods for Time::Piece
url: http://search.cpan.org/dist/Time-Piece-MySQL/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder17.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Time-Piece-MySQL-0.05-24.fc23.src.rpm
checksum_type: sha256
description:
  The Time::Piece::MySQL module can be used instead of, or in addition to,
  Time::Piece to add MySQL-specific date-time methods to Time::Piece objects.


pkgId: 0f360525d97e8f4398bbbdcf0d5cc6a99af35265a78fb4d011b6b15a977ba8e4
name: perl-Time-Progress
arch: src
version: 1.10
epoch: 0
release: 1.fc23
summary: Elapsed and estimated finish time reporting
url: http://search.cpan.org/dist/Time-Progress/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-08.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Time-Progress-1.10-1.fc23.src.rpm
checksum_type: sha256
description:
  This module displays progress information for long-running processes. This
  can be percentage complete, time elapsed, estimated time remaining,
  an ASCII progress bar, or any combination of those.

  It is useful for code where you perform a number of steps, or iterations
  of a loop, where the number of iterations is known before you start
  the loop.


pkgId: 7aac08b25121f71f6baaf00548b25656f5ba04035f76bd9d3c635619702c0349
name: perl-Time-TAI64
arch: src
version: 2.11
epoch: 0
release: 3.fc23
summary: Perl extension for converting TAI64 strings into standard unix timestamps
url: http://search.cpan.org/dist/Time-TAI64/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder16.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Time-TAI64-2.11-3.fc23.src.rpm
checksum_type: sha256
description:
  This package provides routines to convert TAI64 strings, like timestamps
  produced by multilog, into values that can be processed by other perl
  functions to display the timestamp in a human-readable form and/or use
  in mathematical computations.


pkgId: 59f9b3a2367ec2926fcd20d902fdc06aa5a60509b4d8c41d38904ca58f65e305
name: perl-Time-Warp
arch: src
version: 0.52
epoch: 0
release: 2.fc23
summary: Control over the flow of time
url: http://search.cpan.org/dist/Time-Warp
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm04-builder04.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Time-Warp-0.52-2.fc23.src.rpm
checksum_type: sha256
description:
  Our external experience unfolds in 3 1/2 dimensions (time has a
  dimensionality of 1/2). The Time::Warp module offers developers control
  over the measurement of time.


pkgId: 49d3fcdee0a7a79e6fa5e7dde948b9d4e2f7e67ed1a0573b6a09fe62aa0f1bb4
name: perl-Time-timegm
arch: src
version: 0.01
epoch: 0
release: 6.fc23
summary: UTC version of mktime()
url: http://search.cpan.org/dist/Time-timegm/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm04-builder07.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Time-timegm-0.01-6.fc23.src.rpm
checksum_type: sha256
description:
  The POSIX standard provides three functions for converting between integer
  epoch values and 6-component "broken-down" time representations. localtime
  and gmtime convert an epoch into the 6 components of seconds, minutes,
  hours, day of month, month and year, in either local timezone or UTC. The
  mktime function converts a local broken-down time into an epoch value.
  However, POSIX does not provide a UTC version of this.


pkgId: f6aaa705887ea61245e4ef8229a260385dc9be33af9f3aa81aa4f371a491b5bb
name: perl-Time-y2038
arch: src
version: 20100403
epoch: 0
release: 8.fc23
summary: Versions of Perl's time functions which work beyond 2038
url: https://metacpan.org/release/Time-y2038
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder06.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Time-y2038-20100403-8.fc23.src.rpm
checksum_type: sha256
description:
  On many computers, Perl's time functions will not work past the year 2038.
  This is a design fault in the underlying C libraries Perl uses. Time::y2038
  provides replacements for those functions, which will work accurately
  +/1 142 million years.


pkgId: bedfdd8e4a9e7c4f7b42091b8fe13584d467df392b5572c735b7d7db0034728f
name: perl-TimeDate
arch: src
version: 2.30
epoch: 1
release: 7.fc23
summary: A Perl module for time and date manipulation
url: http://search.cpan.org/dist/TimeDate/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder08.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-TimeDate-2.30-7.fc23.src.rpm
checksum_type: sha256
description:
  This module includes a number of smaller modules suited for
  manipulation of time and date strings with Perl. In particular, the
  Date::Format and Date::Parse modules can display and read times and
  dates in various formats, providing a more reliable interface to
  textual representations of points in time.


pkgId: 2c4810addb396783a2fb32c36b31af975174045f0b811d6eb40c2e064bae9f09
name: perl-Titanium
arch: src
version: 1.04
epoch: 0
release: 20.fc23
summary: Strong, lightweight web application framework
url: http://search.cpan.org/dist/Titanium/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder21.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Titanium-1.04-20.fc23.src.rpm
checksum_type: sha256
description:
  Titanium is a more user-friendly packaging of the mature CGI::Application
  framework and some useful plugins, with the intention of creating a strong
  but lightweight web application framework. It runs well in a plain CGI
  environment and provides excellent performance in a persistent environment
  such as FastCGI or mod_perl.


pkgId: 5ab16f1469d91a76c3a09a9a0d8dc576762bf5237db6734774cdf77a3bec3c5e
name: perl-Tk
arch: src
version: 804.033
epoch: 0
release: 3.fc23
summary: Perl Graphical User Interface ToolKit
url: http://search.cpan.org/dist/Tk/
rpm_license: (GPL+ or Artistic) and SWL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder21.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Tk-804.033-3.fc23.src.rpm
checksum_type: sha256
description:
  This a re-port of a perl interface to Tk8.4.
  C code is derived from Tcl/Tk8.4.5.
  It also includes all the C code parts of Tix8.1.4 from SourceForge.
  The perl code corresponding to Tix's Tcl code is not fully implemented.

  Perl API is essentially the same as Tk800 series Tk800.025 but has not
  been verified as compliant. There ARE differences see pod/804delta.pod.


pkgId: 9699b1ecc0841ee4b39f453cf66a37e454fff958dc66e537eccd569488225870
name: perl-Tk-Canvas-GradientColor
arch: src
version: 1.06
epoch: 0
release: 5.fc23
summary: To create a Canvas widget with background gradient color
url: http://search.cpan.org/dist/Tk-Canvas-GradientColor/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-09.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Tk-Canvas-GradientColor-1.06-5.fc23.src.rpm
checksum_type: sha256
description:
  Tk::Canvas::GradientColor is an extension of the Canvas widget. It is an
  easy way to build a canvas widget with gradient background color.


pkgId: 65318fd3f526db994a953bde4b8459d51fb80335e9fded6f253d92b26ee1df3d
name: perl-Tk-ColoredButton
arch: src
version: 1.05
epoch: 0
release: 10.fc23
summary: Button widget with background gradient color
url: http://search.cpan.org/dist/Tk-ColoredButton/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-08.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Tk-ColoredButton-1.05-10.fc23.src.rpm
checksum_type: sha256
description:
  Tk::ColoredButton is an extension of the Tk::Canvas::GradientColor
  widget. It is an easy way to simulate a button widget with gradient
  background color.


pkgId: fa4cd1558eaa637a6385774ee46820cccd5594aea947fbc59c36dbcea5ec9e9e
name: perl-Tk-CursorControl
arch: src
version: 0.4
epoch: 0
release: 11.fc23
summary: Manipulate the mouse cursor programmatically
url: http://search.cpan.org/dist/Tk-CursorControl/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-04.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Tk-CursorControl-0.4-11.fc23.src.rpm
checksum_type: sha256
description:
  This module offers a Tk programmer the functionality of warping, moving,
  confining or hiding a mouse cursor.


pkgId: 02359290eec2fa8e9ae03c4a75a47928c7e4d82b957d71806242ed608828e4a2
name: perl-Tk-DirSelect
arch: src
version: 1.12
epoch: 0
release: 16.fc23
summary: Cross-platform directory selection widget
url: http://search.cpan.org/dist/Tk-DirSelect/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder11.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Tk-DirSelect-1.12-16.fc23.src.rpm
checksum_type: sha256
description:
  This module provides a cross-platform directory selection widget. For
  systems running Microsoft Windows, this includes selection of local and
  mapped network drives. A context menu (right-click or <Button3>) allows the
  creation, renaming, and deletion of directories while browsing.


pkgId: 0adce07e91ccea3c7e746d98484024460c2c525d2d02d7e51c16c7837d7ba5a3
name: perl-Tk-EntryCheck
arch: src
version: 0.04
epoch: 0
release: 10.fc23
summary: Interface to Tk::Entry for controlling its length and content
url: http://search.cpan.org/dist/Tk-EntryCheck/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder20.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Tk-EntryCheck-0.04-10.fc23.src.rpm
checksum_type: sha256
description:
  This module acts as a little wrapper around Tk::Entry and adds an easy to
  use interface to -validate and -validatecommand for controlling length and
  content of an entry widget.


pkgId: 00f96236df040eceee1256d87759f43437745d3ab14e57df0a8c2441fdf44fbb
name: perl-Tk-Getopt
arch: src
version: 0.50
epoch: 0
release: 10.fc23
summary: User configuration window for Tk with interface to Getopt::Long
url: http://search.cpan.org/dist/Tk-Getopt/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder04.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Tk-Getopt-0.50-10.fc23.src.rpm
checksum_type: sha256
description:
  Tk::Getopt provides an interface to access command line options via
  Getopt::Long and editing with a graphical user interface via a Tk window.


pkgId: 8501847807912a3f6b45b2f22adae6d02e1ec7e39a25bdcaf3278cc1e21b26ba
name: perl-Tk-GraphViz
arch: src
version: 1.01
epoch: 0
release: 15.fc23
summary: Render an interactive GraphViz graph
url: http://search.cpan.org/dist/Tk-GraphViz/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder02.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Tk-GraphViz-1.01-15.fc23.src.rpm
checksum_type: sha256
description:
  The GraphViz widget is derived from Tk::Canvas. It adds the ability to
  render graphs in the canvas. The graphs can be specified either using the
  DOT graph-description language, or using via a GraphViz object.


pkgId: 80e3fb0b01b52a09ef946d05d1f58258952cad141b42e6f8b864f04972ce71ca
name: perl-Tk-ObjScanner
arch: src
version: 2.016
epoch: 0
release: 4.fc23
summary: Tk data scanner
url: http://search.cpan.org/dist/Tk-ObjScanner/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm02-builder19.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Tk-ObjScanner-2.016-4.fc23.src.rpm
checksum_type: sha256
description:
  This perl module provides a GUI to scan the attributes of an object. It can
  also be used to scan the elements of a hash or an array.


pkgId: fa919f6ac716487fd087d0548a1534c8970ca943d5d2734fad71d8f54b12ab53
name: perl-Tk-ProgressBar-Mac
arch: src
version: 1.2
epoch: 0
release: 19.fc23
summary: Mac ProgressBar for Perl::Tk
url: http://search.cpan.org/dist/Tk-ProgressBar-Mac/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder04.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Tk-ProgressBar-Mac-1.2-19.fc23.src.rpm
checksum_type: sha256
description:
  This widget provides a dynamic image that looks just like
  a Mac OS 9 progress bar.  Packed around it are four
  Frames, north, south, east and west, within which you can
  stuff additional widgets. For example, see how Tk::Copy::Mac
  uses several Labels and a CollapsableFrame widget to create
  a reasonable facsimile of a Macintosh copy dialog.


pkgId: 35cfb09a35dd3dae5fda5f555c2e71977dc9abf42538c4f878450741344ea68c
name: perl-Tk-Stderr
arch: src
version: 1.2
epoch: 0
release: 22.fc23
summary: Capture standard error output, display in separate window for Perl::Tk
url: http://search.cpan.org/dist/Tk-Stderr/
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder05.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Tk-Stderr-1.2-22.fc23.src.rpm
checksum_type: sha256
description:
  This module captures that standard error of a program and redirects it
  to a read only text widget, which doesn't appear until necessary. When
  it does appear, the user can close it; it'll appear again when there is
  more output.


pkgId: 00df049e3a6f99f5be4d8e3a59f1079cb18c5b00637786c913542feb154c263f
name: perl-Tk-TableMatrix
arch: src
version: 1.23
epoch: 0
release: 24.fc23
summary: Perl module for creating and manipulating tables
url: http://search.cpan.org/dist/Tk-TableMatrix/
rpm_license: (GPL+ or Artistic) and BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm04-builder19.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Tk-TableMatrix-1.23-24.fc23.src.rpm
checksum_type: sha256
description:
  The TableMatrix command creates a 2-dimensional grid of cells. The
  table can use a Tcl array variable or Tcl command for data storage and
  retrieval.


pkgId: 6382c5cf1912cbb1b50bf0c4a92b93356f0aee12e42c50722e5e89ef79ffd39d
name: perl-Tk-Text-SuperText
arch: src
version: 0.9.4
epoch: 0
release: 16.fc23
summary: Improved text widget for perl/tk
url: http://search.cpan.org/dist/Tk-Text-SuperText/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-06.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Tk-Text-SuperText-0.9.4-16.fc23.src.rpm
checksum_type: sha256
description:
  Tk::Text::SuperText implements many new features over the standard Tk::Text
  widget while supporting all it's standard features. Its used simply as the
  Tk::Text widget.


pkgId: 09dcb0e9169a340817e845be7dbe8e88b30bab033a3061c07412677935a97e45
name: perl-Tk-ToolBar
arch: src
version: 0.12
epoch: 0
release: 3.fc23
summary: Toolbar widget for Perl/Tk
url: http://search.cpan.org/dist/Tk-ToolBar/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-17.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Tk-ToolBar-0.12-3.fc23.src.rpm
checksum_type: sha256
description:
  This module implements a dockable toolbar. It is in the same spirit as the
  "short-cut" toolbars found in most major applications, such as most web
  browsers and text editors (where you find the "back" or "save" and other
  shortcut buttons).


pkgId: e219e3e2c2c6aad5c70d067907e297fb4f67334e18e9ad2d11dfd71800a6b83b
name: perl-Tree-DAG_Node
arch: src
version: 1.27
epoch: 0
release: 1.fc23
summary: Class for representing nodes in a tree
url: http://search.cpan.org/dist/Tree-DAG_Node/
rpm_license: Artistic 2.0
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-22.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Tree-DAG_Node-1.27-1.fc23.src.rpm
checksum_type: sha256
description:
  This class encapsulates/makes/manipulates objects that represent nodes in a
  tree structure. The tree structure is not an object itself, but is emergent
  from the linkages you create between nodes. This class provides the methods
  for making linkages that can be used to build up a tree, while preventing you
  from ever making any kinds of linkages that are not allowed in a tree (such as
  having a node be its own mother or ancestor, or having a node have two
  mothers).


pkgId: 1a63462f83d07b11a559d99fbf1c7ad7b1611e8af4ae23b16e9ddd707c91954a
name: perl-Tree-R
arch: src
version: 0.06
epoch: 0
release: 4.fc23
summary: Perl extension for the R-tree data structure and algorithms
url: http://search.cpan.org/dist/Tree-R/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-11.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Tree-R-0.06-4.fc23.src.rpm
checksum_type: sha256
description:
  R-tree is a data structure for storing and indexing and efficiently looking
  up non-zero-size spatial objects.


pkgId: 65b7d6b6bbb30c8eaec58a3eb2777b22ff8a7411609fead7e810214be3c8f674
name: perl-Tree-Simple-VisitorFactory
arch: src
version: 0.12
epoch: 0
release: 3.fc23
summary: Factory object for dispensing Visitor objects
url: http://search.cpan.org/dist/Tree-Simple-VisitorFactory/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-17.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Tree-Simple-VisitorFactory-0.12-3.fc23.src.rpm
checksum_type: sha256
description:
  This package contains a collection of Tree::Simple::Visitor::* objects,
  and a factory for easily creating instances of them.


pkgId: b0eb9f5348c4c1296943f43521ce860f1b10d452860ce8e27bcf6aa6d6bc394c
name: perl-Tree-XPathEngine
arch: src
version: 0.05
epoch: 0
release: 10.fc23
summary: Re-usable XPath engine
url: http://search.cpan.org/dist/Tree-XPathEngine/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder20.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Tree-XPathEngine-0.05-10.fc23.src.rpm
checksum_type: sha256
description:
  This module provides an XPath engine, that can be re-used by other
  modules/classes that implement trees.


pkgId: 6a5e90c46bb8de55f3bc7cfde59cf5e87d066912ba06839e627fb930d70f5b35
name: perl-Try-Tiny
arch: src
version: 0.22
epoch: 0
release: 6.fc23
summary: Minimal try/catch with proper localization of $@
url: http://search.cpan.org/dist/Try-Tiny
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-10.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Try-Tiny-0.22-6.fc23.src.rpm
checksum_type: sha256
description:
  This module provides bare bones try/catch statements that are designed to
  minimize common mistakes with eval blocks, and NOTHING else.

  This is unlike TryCatch, which provides a nice syntax and avoids adding
  another call stack layer, and supports calling return from the try block to
  return from the parent subroutine. These extra features come at a cost of a
  few dependencies, namely Devel::Declare and Scope::Upper that are occasionally
  problematic, and the additional catch filtering uses Moose type constraints,
  which may not be desirable either.


pkgId: f851f548059ea9f4eae7c96151daadd7b35e960dd0907c0f7aaa017879a24179
name: perl-TryCatch
arch: src
version: 1.003002
epoch: 0
release: 8.fc23
summary: First class try catch semantics for Perl, without source filters
url: http://search.cpan.org/dist/TryCatch/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder11.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-TryCatch-1.003002-8.fc23.src.rpm
checksum_type: sha256
description:
  This module aims to provide a nicer syntax and method to catch errors in
  Perl, similar to what is found in other languages (such as Java, Python or
  C++). The standard method of using eval {}; if ($@) {} is often prone to
  subtle bugs, primarily that its far too easy to stomp on the error in error
  handlers. And also eval/if isn't the nicest idiom.


pkgId: 5457c9fe0dbbdeaec9ce90d45436fe00188b755c5098209f8d54813b73c86812
name: perl-Type-Tiny
arch: src
version: 1.000005
epoch: 0
release: 4.fc23
summary: Tiny, yet Moo(se)-compatible type constraint
url: http://search.cpan.org/dist/Type-Tiny/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-20.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Type-Tiny-1.000005-4.fc23.src.rpm
checksum_type: sha256
description:
  Type::Tiny is a tiny class for creating Moose-like type constraint objects
  which are compatible with Moo, Moose and Mouse.


pkgId: 29f0e446979d8aa720adc008c78d5578b6bc4ec7f082175d36829bb341348a9f
name: perl-Types-Serialiser
arch: src
version: 1.0
epoch: 0
release: 5.fc23
summary: Simple data types for common serialization formats
url: http://search.cpan.org/dist/Types-Serialiser/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-05.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Types-Serialiser-1.0-5.fc23.src.rpm
checksum_type: sha256
description:
  This module provides some extra data types that are used by common
  serialization formats such as JSON or CBOR. The idea is to have a repository of
  simple/small constants and containers that can be shared by different
  implementations so they become interoperable between each other.


pkgId: 04cbbda44d2f26bfc5bd683621b2b6a1686df8455d28c67b195395a136cc8197
name: perl-UDDI-Lite
arch: src
version: 0.718
epoch: 0
release: 5.fc23
summary: Library for UDDI clients in Perl
url: http://search.cpan.org/dist/UDDI-Lite/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder10.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-UDDI-Lite-0.718-5.fc23.src.rpm
checksum_type: sha256
description:
  UDDI::Lite for Perl is a collection of Perl modules which provides a simple
  and lightweight interface to the Universal Description, Discovery and
  Integration (UDDI) server.


pkgId: 9a6e34630d3c84f9639506eaa90b8ef7715f900c282f96c80cc9a4736878f7e7
name: perl-UNIVERSAL-can
arch: src
version: 1.20140328
epoch: 0
release: 3.fc23
summary: Hack around people calling UNIVERSAL::can() as a function
url: http://search.cpan.org/dist/UNIVERSAL-can/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder08.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-UNIVERSAL-can-1.20140328-3.fc23.src.rpm
checksum_type: sha256
description:
  The UNIVERSAL class provides a few default methods so that all objects
  can use them. Object orientation allows programmers to override these
  methods in subclasses to provide more specific and appropriate behavior.

  Some authors call methods in the UNIVERSAL class on potential invocants
  as functions, bypassing any possible overriding. This is wrong and you
  should not do it. Unfortunately, not everyone heeds this warning and
  their bad code can break your good code.


pkgId: 402f1e1992b61b0a2f824c464543d70770c1016f675de291b5c14325b9401220
name: perl-UNIVERSAL-isa
arch: src
version: 1.20150614
epoch: 0
release: 1.fc23
summary: Hack around module authors using UNIVERSAL::isa as a function
url: http://search.cpan.org/dist/UNIVERSAL-isa/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-06.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-UNIVERSAL-isa-1.20150614-1.fc23.src.rpm
checksum_type: sha256
description:
  Whenever you use "isa" in UNIVERSAL as a function, a kitten using
  Test::MockObject dies. Normally, the kittens would be helpless, but
  if they use UNIVERSAL::isa (the module whose docs you are reading),
  the kittens can live long and prosper.

  This module replaces UNIVERSAL::isa with a version that makes sure
  that if it's called as a function on objects which override isa,
  isa will be called on those objects as a method.

  In all other cases the real UNIVERSAL::isa is just called directly.


pkgId: b1996110c14e2eb4e7f0dd8ce18ae29587b4572eb539e927e8d96a2dfbddc558
name: perl-UNIVERSAL-moniker
arch: src
version: 0.08
epoch: 0
release: 26.fc23
summary: Real world naming for classes
url: http://search.cpan.org/dist/UNIVERSAL-moniker/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder20.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-UNIVERSAL-moniker-0.08-26.fc23.src.rpm
checksum_type: sha256
description:
  UNIVERSAL::moniker enables classes to make a good
  guess at what they would be called in the real world.


pkgId: 417945d9d9dd625f110c77de517c218e4885c2e248b340e32810920619c15b65
name: perl-UNIVERSAL-ref
arch: src
version: 0.14
epoch: 0
release: 14.fc23
summary: Turns ref() into a multimethod
url: http://search.cpan.org/dist/UNIVERSAL-ref
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder21.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-UNIVERSAL-ref-0.14-14.fc23.src.rpm
checksum_type: sha256
description:
  This module changes the behavior of the builtin function ref(). If
  ref() is called on an object that has requested an overloaded ref,
  the object's '->ref' method will be called and its return value
  used instead.


pkgId: 7bd842680abc462b5c471ad5021cb29bd32d53876f6f2b09769224738296858a
name: perl-URI
arch: src
version: 1.69
epoch: 0
release: 1.fc23
summary: A Perl module implementing URI parsing and manipulation
url: http://search.cpan.org/dist/URI/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-27.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-URI-1.69-1.fc23.src.rpm
checksum_type: sha256
description:
  This module implements the URI class. Objects of this class represent
  "Uniform Resource Identifier references" as specified in RFC 2396 (and
  updated by RFC 2732).


pkgId: ebc20b4cb616b7d0f4b030a85b8f55fdd1751bbfe2e8d8ceb39d838cfd02456a
name: perl-URI-Encode
arch: src
version: 0.09
epoch: 0
release: 3.fc23
summary: Percent encoding/decoding for URIs
url: http://search.cpan.org/dist/URI-Encode/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-16.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-URI-Encode-0.09-3.fc23.src.rpm
checksum_type: sha256
description:
  This module provides a method to encode strings (mainly URLs) into a format
  which can be pasted into a plain text emails, and that those links are
  'click-able' by the person reading that email.  This can be accomplished by NOT
  encoding the reserved characters.


pkgId: 2a18f5b8d9ac91d2901a031b2c2f4c9db17a98b2211055abb449577162297538
name: perl-URI-Escape-XS
arch: src
version: 0.13
epoch: 0
release: 1.fc23
summary: Drop-In replacement for URI::Escape
url: http://search.cpan.org/dist/URI-Escape-XS/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm04-builder20.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-URI-Escape-XS-0.13-1.fc23.src.rpm
checksum_type: sha256
description:
  This is a drop-in replacement for the URI::Escape module. Since it
  uses XS, it is really fast except for uri_escape("noop").


pkgId: 4ef1d2dd2e22ee8ce23590ae238d908c67354bc65fe6eb15f78555145e39bd96
name: perl-URI-Fetch
arch: src
version: 0.11
epoch: 0
release: 1.fc23
summary: Smart URI fetching/caching
url: http://search.cpan.org/dist/URI-Fetch/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm02-builder18.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-URI-Fetch-0.11-1.fc23.src.rpm
checksum_type: sha256
description:
  URI::Fetch is a smart client for fetching HTTP pages, notably syndication
  feeds (RSS, Atom, and others), in an intelligent, bandwidth and time
  saving way.


pkgId: b519b077e5e5952dd14388a9cb361cce7d29b67fd2582a681c3ebf45a999dff3
name: perl-URI-Find
arch: src
version: 20140709
epoch: 0
release: 5.fc23
summary: Find URIs in plain text
url: http://search.cpan.org/dist/URI-Find
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-12.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-URI-Find-20140709-5.fc23.src.rpm
checksum_type: sha256
description:
  This module does one thing: Finds URIs and URLs in plain text. It finds
  them quickly and it finds them *all* (or what URI::URL considers a URI to
  be.) It only finds URIs which include a scheme (http:// or the like), for
  something a bit less strict have a look at URI::Find::Schemeless.

  For a command-line interface, see Darren Chamberlain's 'urifind' script.
  It's available from his CPAN directory:

      http://www.cpan.org/authors/id/D/DA/DARREN/


pkgId: b5fafe02d75b7bf93c312a3536bf5f109b2abab926d2fc2be7657133ed86b69a
name: perl-URI-Find-Simple
arch: src
version: 1.06
epoch: 0
release: 4.fc23
summary: Simple interface to URI::Find
url: http://search.cpan.org/dist/URI-Find-Simple/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder08.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-URI-Find-Simple-1.06-4.fc23.src.rpm
checksum_type: sha256
description:
  URI::Find is all very well, but sometimes you just want a list of the links
  in a given piece of text, or you want to change all the URLs in some text
  somehow, and don't want to mess with callback interfaces.

  This module uses URI::Find, but hides the callback interface, providing two
  functions - one to list all the uris, and one to change all the uris.


pkgId: 0aa71977927c994eea3840f2c78b31bddecbb56c3c4a5e5161fbdd0b0f6fd352
name: perl-URI-FromHash
arch: src
version: 0.04
epoch: 0
release: 7.fc23
summary: Build a URI from a set of named parameters
url: http://search.cpan.org/dist/URI-FromHash
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm04-builder11.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-URI-FromHash-0.04-7.fc23.src.rpm
checksum_type: sha256
description:
  This module provides a simple one-subroutine "named parameters" style
  interface for creating URIs. Underneath the hood it uses 'URI.pm', though
  because of the simplified interface it may not support all possible options
  for all types of URIs.

  It was created for the common case where you simply want to have a simple
  interface for creating syntactically correct URIs from known components
  (like a path and query string). Doing this using the native 'URI.pm'
  interface is rather tedious, requiring a number of method calls, which is
  particularly ugly when done inside a templating system such as Mason or
  TT2.


pkgId: 717fb625324ea274c821cc168c954d3ee299985ccb91741207232868993a6fa5
name: perl-URI-Title
arch: src
version: 1.900
epoch: 0
release: 3.fc23
summary: Get the titles of things on the web in a sensible way
url: http://search.cpan.org/dist/URI-Title/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-02.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-URI-Title-1.900-3.fc23.src.rpm
checksum_type: sha256
description:
  I keep having to find the title of things on the web.  This seems like a really
  simple request, just get() the object, parse for a title tag, you're done.
  Ha, I wish.  There are several problems with this approach:

  What if the resource is on a very slow server?  Do we wait forever or what?
  What if the resource is a 900 gig file?  You don't want to download that.
  What if the page title isn't in a title tag, but is buried in the HTML
  somewhere?
  What if the resource is an MP3 file, or a word document or something?
  ...

  So, let's solve these issues once.


pkgId: 02d3ee95689418254d7ead9a0c4b5f18c89ac38ae21f19462afeaec6165a223f
name: perl-URI-ws
arch: src
version: 0.03
epoch: 0
release: 3.fc23
summary: WebSocket support for URI package
url: http://search.cpan.org/dist/URI-ws/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm02-builder03.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-URI-ws-0.03-3.fc23.src.rpm
checksum_type: sha256
description:
  After this module is installed, the URI package provides the same set of
  methods for WebSocket URIs as it does for HTTP ones. For secure WebSockets,
  see URI::wss.


pkgId: d6b70abe253fa36c8ac71057f0686bb24e4e04727dbe213c72097cc4540cfe6b
name: perl-URL-Encode-XS
arch: src
version: 0.03
epoch: 0
release: 3.fc23
summary: XS implementation of URL::Encode
url: http://search.cpan.org/dist/URL-Encode-XS/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm02-builder20.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-URL-Encode-XS-0.03-3.fc23.src.rpm
checksum_type: sha256
description:
  This package implements the original URL::Encode via XS interface. The main
  URL::Encode package will use this package automatically if it can find it.
  Do not use this package directly, use URL::Encode instead.


pkgId: 2a702a01664ff337b0db2f6da6dd8d98181580892a72f636bdf6e61b57e3fc12
name: perl-UUID-Tiny
arch: src
version: 1.04
epoch: 0
release: 6.fc23
summary: Pure Perl UUID Support With Functional Interface
url: http://search.cpan.org/dist/UUID-Tiny/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder03.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-UUID-Tiny-1.04-6.fc23.src.rpm
checksum_type: sha256
description:
  UUID::Tiny is a lightweight, low dependency Pure Perl module for UUID
  creation and testing. This module provides the creation of version 1 time
  based UUIDs (using random multicast MAC addresses), version 3 MD5 based
  UUIDs, version 4 random UUIDs, and version 5 SHA-1 based UUIDs.


pkgId: 0cd48ab7934ea4bcf0bc3fb929d9b3db2161fd504ddb2edc26db9fd3b158caa1
name: perl-Unicode-CaseFold
arch: src
version: 1.00
epoch: 0
release: 5.fc23
summary: Unicode case-folding for case-insensitive lookups
url: http://search.cpan.org/dist/Unicode-CaseFold/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm02-builder04.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Unicode-CaseFold-1.00-5.fc23.src.rpm
checksum_type: sha256
description:
  This module provides Unicode case-folding for Perl. Case-folding is a tool
  that allows a program to make case-insensitive string comparisons or do case-
  insensitive lookups.


pkgId: f54b80a831dd632bd656455a2e0c9baf3a380894dff055894f163506007f6ca2
name: perl-Unicode-Casing
arch: src
version: 0.15
epoch: 0
release: 4.fc23
summary: Perl extension to override system case changing functions
url: http://search.cpan.org/dist/Unicode-Casing/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder07.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Unicode-Casing-0.15-4.fc23.src.rpm
checksum_type: sha256
description:
  This module allows overriding the system-defined character case changing
  functions. Any time something in its lexical scope would ordinarily call
  lc(), lcfirst(), uc(), or ucfirst() the corresponding user-specified
  function will instead be called. This applies to direct calls, and indirect
  calls via the \L, \l, \U, and \u escapes in double quoted strings and
  regular expressions.


pkgId: 0c77f4ccc91f4b06a3f7eafde00426741b1b3e97c6342364147d2952b9307697
name: perl-Unicode-CheckUTF8
arch: src
version: 1.03
epoch: 0
release: 13.fc23
summary: Checks if scalar is valid UTF-8
url: http://search.cpan.org/dist/Unicode-String/
rpm_license: UCD and (GPL+ or Artistic)
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder06.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Unicode-CheckUTF8-1.03-13.fc23.src.rpm
checksum_type: sha256
description:
  This is an XS wrapper around some Unicode Consortium code to check if a string
  is valid UTF-8, revised to conform to what expat/Mozilla think is valid UTF-8,
  especially with regard to low-ASCII characters.

  Note that this module has NOTHING to do with Perl's internal UTF8 flag on
  scalars.

  This module is for use when you're getting input from users and want to make
  sure it's valid UTF-8 before continuing.


pkgId: 1d7e6f44258c878f24e3ec20d3b230a9356b62481b4630e98cafa8220c176691
name: perl-Unicode-Collate
arch: src
version: 1.14
epoch: 0
release: 1.fc23
summary: Unicode Collation Algorithm
url: http://search.cpan.org/dist/Unicode-Collate/
rpm_license: (GPL+ or Artistic) and UCD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder19.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Unicode-Collate-1.14-1.fc23.src.rpm
checksum_type: sha256
description:
  This package is Perl implementation of Unicode Technical Standard #10 (Unicode
  Collation Algorithm).


pkgId: ae081f4ecdcbd7dbb02358e839eb6bf944b9169ac3d36906158ac951f00b23ac
name: perl-Unicode-EastAsianWidth
arch: src
version: 1.33
epoch: 0
release: 6.fc23
summary: East Asian Width properties
url: http://search.cpan.org/dist/Unicode-EastAsianWidth/
rpm_license: CC0
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-19.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Unicode-EastAsianWidth-1.33-6.fc23.src.rpm
checksum_type: sha256
description:
  This module provide user-defined Unicode properties that deal with width
  status of East Asian characters, as specified in
  <http://www.unicode.org/unicode/reports/tr11/>.


pkgId: a2f793515607a08ad73b4004784d0868af08e951d9244fcae13d2c9c7017aebe
name: perl-Unicode-LineBreak
arch: src
version: 2013.11
epoch: 0
release: 7.fc23
summary: UAX #14 Unicode Line Breaking Algorithm
url: http://search.cpan.org/dist/Unicode-LineBreak/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder08.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Unicode-LineBreak-2013.11-7.fc23.src.rpm
checksum_type: sha256
description:
  Unicode::LineBreak performs Line Breaking Algorithm described in Unicode
  Standards Annex #14 [UAX #14]. East_Asian_Width informative properties
  defined by Annex #11 [UAX #11] will be concerned to determine breaking
  positions.


pkgId: ea2ec5caaea7cbd8443cb6f7d2bf108211c0ca6873596ceb593f6ace78b3f265
name: perl-Unicode-Map
arch: src
version: 0.112
epoch: 0
release: 35.fc23
summary: Perl module for mapping charsets from and to utf16 unicode
url: http://search.cpan.org/dist/Unicode-Map/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm02-builder19.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Unicode-Map-0.112-35.fc23.src.rpm
checksum_type: sha256
description:
  This module converts strings from and to 2-byte Unicode UCS2
  format. All mappings happen via 2 byte UTF16 encodings, not via 1 byte
  UTF8 encoding. To convert between UTF8 and UTF16 use Unicode::String.
  For historical reasons this module coexists with Unicode::Map8.
  Please use Unicode::Map8 unless you need to care for >1 byte character
  sets, e.g. chinese GB2312. Anyway, if you stick to the basic
  functionality (see documentation) you can use both modules
  equivalently.


pkgId: 8cc36179acfca846e8cd0d3a696ddc11dd3eb8a0778bc740204fc8d3a76d6388
name: perl-Unicode-Map8
arch: src
version: 0.13
epoch: 0
release: 19.fc23
summary: Mapping table between 8-bit chars and Unicode for Perl
url: http://search.cpan.org/dist/Unicode-Map8/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm04-builder17.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Unicode-Map8-0.13-19.fc23.src.rpm
checksum_type: sha256
description:
  The Unicode::Map8 class implements efficient mapping tables between
  8-bit character sets and 16 bit character sets like Unicode.  About
  170 different mapping tables between various known character sets and
  Unicode is distributed with this package.  The source of these tables
  is the vendor mapping tables provided by Unicode, Inc. and the code
  tables in RFC 1345.  New maps can easily be installed.


pkgId: c0c72322b19778a4e902d33ef06ce24b07e4620b00f13762b47dce66f8adb292
name: perl-Unicode-MapUTF8
arch: src
version: 1.11
epoch: 0
release: 27.fc23
summary: Conversions to and from arbitrary character sets and UTF8
url: http://search.cpan.org/dist/Unicode-MapUTF8/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm04-builder18.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Unicode-MapUTF8-1.11-27.fc23.src.rpm
checksum_type: sha256
description:
  Unicode::MapUTF8 Provides an adapter layer between core routines for
  converting to and from UTF8 and other encodings. In essence, a way to
  give multiple existing Unicode modules a single common interface so
  you don't have to know the underlaying implementations to do simple
  UTF8 to-from other character set string conversions. As such, it wraps
  the Unicode::String, Unicode::Map8, Unicode::Map and Jcode modules in
  a standardized and simple API.


pkgId: 03a239b50d4d5039a7d3938992b8068d6697a36e88d01fb90abe4c58d4312e20
name: perl-Unicode-Normalize
arch: src
version: 1.21
epoch: 0
release: 1.fc23
summary: Unicode Normalization Forms
url: http://search.cpan.org/dist/Unicode-Normalize/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-07.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Unicode-Normalize-1.21-1.fc23.src.rpm
checksum_type: sha256
description:
  This package provides Perl functions that can convert strings into various
  Unicode normalization forms as defined in Unicode Standard Annex #15.


pkgId: 267f25ad68770efd763fbf4cbed4eedd753ab324a32097f939f88e878992d05a
name: perl-Unicode-Stringprep
arch: src
version: 1.105
epoch: 0
release: 4.fc23
summary: Preparation of Internationalized Strings (RFC 3454)
url: http://search.cpan.org/dist/Unicode-Stringprep/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-08.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Unicode-Stringprep-1.105-4.fc23.src.rpm
checksum_type: sha256
description:
  This module implements the stringprep framework for preparing Unicode
  text strings in order to increase the likelihood that string input and
  string comparison work in ways that make sense for typical users
  throughout the world. The stringprep protocol is useful for protocol
  identifier values, company and personal names, internationalized domain
  names, and other text strings.


pkgId: b1d41a6f87a66e190a91f76dc1241c275fba84fdee9b541b59c31d54d44c8e0e
name: perl-Unicode-UTF8
arch: src
version: 0.60
epoch: 0
release: 6.fc23
summary: Encoding and decoding of UTF-8 encoding form
url: http://search.cpan.org/dist/Unicode-UTF8/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder19.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Unicode-UTF8-0.60-6.fc23.src.rpm
checksum_type: sha256
description:
  This module provides functions to encode and decode UTF-8 encoding form as
  specified by Unicode and ISO/IEC 10646:2011.


pkgId: 197afb59ae8965c42cd9b6415a0689e1c921b8d9674f022aa31162934b388972
name: perl-Unix-Statgrab
arch: src
version: 0.04
epoch: 0
release: 25.1.fc23
summary: Perl extension for collecting information about the machine
url: http://search.cpan.org/dist/Unix-Statgrab/
rpm_license: LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder14.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Unix-Statgrab-0.04-25.1.fc23.src.rpm
checksum_type: sha256
description:
  Unix::Statgrab is a wrapper for libstatgrab as available from
  <http://www.i-scream.org/libstatgrab/>. It is a reasonably portable attempt
  to query interesting stats about your computer. It covers information on the
  operating system, CPU, memory usage, network interfaces, hard-disks etc.


pkgId: fbe9e55bc4ec2d22cbe428b20e7b0d224d848de10f6967cb9c5270f597141462
name: perl-Unix-Syslog
arch: src
version: 1.1
epoch: 0
release: 21.fc23
summary: Perl interface to the UNIX syslog(3) calls
url: http://search.cpan.org/dist/Unix-Syslog/
rpm_license: Artistic 2.0
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder12.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Unix-Syslog-1.1-21.fc23.src.rpm
checksum_type: sha256
description:
  This module provides an interface to the system logger syslogd(8) via
  Perl's XSUBs. The implementation attempts to resemble the native libc-
  functions of your system, so that anyone being familiar with syslog.h
  should be able to use this module right away.


pkgId: f9e6ecb141e2c9639b93bc0260e7cd8c33352cc3c7ffe13129ccc7c215efca1d
name: perl-User-Identity
arch: src
version: 0.93
epoch: 0
release: 14.fc23
summary: Maintains info about a physical person
url: http://search.cpan.org/dist/User-Identity/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-17.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-User-Identity-0.93-14.fc23.src.rpm
checksum_type: sha256
description:
  A modules designed to store and maintain a set of informational objects which
  are related to one user.


pkgId: 77db4c29f889ac2575ea9a71392b1d129bdddabd960f97061556ad2426fb48b6
name: perl-User-Utmp
arch: src
version: 1.8
epoch: 0
release: 9.fc23
summary: Perl access to utmp- and utmpx-style databases
url: http://search.cpan.org/dist/User-Utmp/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder02.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-User-Utmp-1.8-9.fc23.src.rpm
checksum_type: sha256
description:
  UNIX systems record information about current and past log-ins in a user
  accounting database. This database is realized by two files: File utmpx
  contains a record of all users currently logged onto the system, while file
  wtmpx contains a record of all log-ins and log-outs. Some systems (such as
  HP-UX and AIX) also maintain a third file containing failed log-in attempts.
  The information in these files is used by commands such as who(1), last(1),
  write(1), or login(1).


pkgId: d45332010a0c1f325f0bee8f9da4ee9a6c49fe16b82f4401e0b8ea1a0f2a54a0
name: perl-VM-EC2
arch: src
version: 1.28
epoch: 0
release: 1.fc23
summary: Control the Amazon EC2 and Eucalyptus Clouds
url: http://search.cpan.org/dist/VM-EC2/
rpm_license: (GPL+ or Artistic 2.0) and (GPL+ or Artistic)
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-27.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-VM-EC2-1.28-1.fc23.src.rpm
checksum_type: sha256
description:
  This is an interface to the 2013-07-15 version of the Amazon AWS API
  <http://aws.amazon.com/ec2>. This library will also support the Eucalyptus
  open source cloud <http://open.eucalyptus.com>.


pkgId: ba615c257e7948df1c6b991d2b552df680b14d9eeab12fba4e3993cb635ba162
name: perl-VM-EC2-Security-CredentialCache
arch: src
version: 0.25
epoch: 0
release: 1.fc23
summary: Cache credentials respecting expiration time for IAM roles
url: http://search.cpan.org/dist/VM-EC2-Security-CredentialCache/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-24.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-VM-EC2-Security-CredentialCache-0.25-1.fc23.src.rpm
checksum_type: sha256
description:
  This Perl package provides a cache for an EC2's IAM credentials. Rather than
  retrieving the credentials for every possible call that uses them, cache them
  until they expire and retrieve them again if they have expired.


pkgId: 606630cda8a23c0104234ec2a503df1bfc2dd339d5fb67721bd08d5e3bb6cb0a
name: perl-VMware-LabManager
arch: src
version: 0.01
epoch: 0
release: 10.fc23
summary: Perl module to provide basic VMware Lab Manager operations
url: http://search.cpan.org/dist/VMware-LabManager/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-12.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-VMware-LabManager-0.01-10.fc23.src.rpm
checksum_type: sha256
description:
  This module does not provide a one-to-one mapping of the Lab Manager SOAP
  API, but rather it provides an API wrapper, which combines certain SOAP
  calls as a meaningful single operation. Thus this module is heavily
  tailored for automation purposes. But, it should also cater to the
  broader audience as it still does provide overall functionality that
  might be required.


pkgId: 89839f07d4ca1b6975a94d0fb5b90f1b8687423259f04f2862d1844a683dc5e4
name: perl-VOMS-Lite
arch: src
version: 0.20
epoch: 0
release: 6.fc23
summary: Perl extension for VOMS Attribute certificate creation
url: http://search.cpan.org/dist/VOMS-Lite/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder19.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-VOMS-Lite-0.20-6.fc23.src.rpm
checksum_type: sha256
description:
  VOMS (virtual organization membership service) is a system for
  managing grid level authorization data within
  multi-institutional collaborations via membership and roles
  within that membership.

  VOMS::Lite provides a perl library and client tools
  for interacting with an existing voms service including the
  well known C implementation of voms.

  A number of commands are included for generating and processing
  proxies including  voms-proxy-init.pl, voms-ac-issue.pl, ...

  Configuration of client tools can be supplied via
  $ENV{'VOMS_CONFIG_FILE'} or else ~/.grid-security/voms.conf.
  The root user only uses /etc/grid-security/voms.config.


pkgId: 809826589b35e9bcc0e9417c52b61fb18411d21759fb9fee05c1373dca0bfbbb
name: perl-Variable-Magic
arch: src
version: 0.57
epoch: 0
release: 3.fc23
summary: Associate user-defined magic to variables from Perl
url: http://search.cpan.org/dist/Variable-Magic/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm04-builder04.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Variable-Magic-0.57-3.fc23.src.rpm
checksum_type: sha256
description:
  Magic is Perl way of enhancing objects. This mechanism let the user add
  extra data to any variable and hook syntaxical operations (such as access,
  assignation or destruction) that can be applied to it. With this module,
  you can add your own magic to any variable without the pain of the C API.


pkgId: 5fd3c757559e3b426f36fcd867ca84b8a81059ea49163e5d45538a62ed7328af
name: perl-Verilog-CodeGen
arch: src
version: 0.9.4
epoch: 0
release: 18.fc23
summary: Verilog code generator
url: http://search.cpan.org/dist/Verilog-CodeGen/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-11.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Verilog-CodeGen-0.9.4-18.fc23.src.rpm
checksum_type: sha256
description:
  Provides an object-oriented environment to generate Verilog code for
  modules and testbenches. The Verilog::CodeGen module provides two
  functions, one to create a code template and another to create a Perl
  module which contains the device library. This module ,
  DeviceLibs::YourDesign, provides the class methods and contains the objects
  for every Verilog module; the objects are created based on a fixed
  template. The purpose of this module is to allow the generation of
  customized Verilog modules. A Verilog module can have a large number of
  parameters like input and output bus width, buffer depth, signal delay etc.
  The code generator allows to create an object that will generate the
  Verilog module code for arbitraty values of the parameters.


pkgId: 0888de24a2924ef7801c8de4b6544263bd01661161fe28beb9b7e5ee9b1ec5f5
name: perl-Verilog-Readmem
arch: src
version: 0.04
epoch: 0
release: 17.fc23
summary: Parse Verilog $readmemh or $readmemb text file
url: http://search.cpan.org/dist/Verilog-Readmem/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-11.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Verilog-Readmem-0.04-17.fc23.src.rpm
checksum_type: sha256
description:
  The Verilog Hardware Description Language (HDL) provides a convenient way
  to load a memory during logic simulation. The $readmemh() and $readmemb()
  system tasks are used in the HDL source code to import the contents of a
  text file into a memory variable.


pkgId: b2305f22ffe29f129357d97a2b0c3220d927b5bc45602097b47f0070f6ea331f
name: perl-Version-Requirements
arch: src
version: 0.101023
epoch: 0
release: 3.fc23
summary: Set of version requirements for a CPAN dist (DEPRECATED)
url: http://search.cpan.org/dist/Version-Requirements/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder21.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Version-Requirements-0.101023-3.fc23.src.rpm
checksum_type: sha256
description:
  Version::Requirements is now DEPRECATED.

  Use CPAN::Meta::Requirements, which is a drop-in replacement.

  A Version::Requirements object models a set of version constraints like
  those specified in the META.yml or META.json files in CPAN distributions.
  It can be built up by adding more and more constraints, and it will reduce
  them to the simplest representation.


pkgId: 6ec3d4c7f32a1dd329540fbce6528633a5d71ec6763ad753fc5fb75f85682605
name: perl-WWW-Bugzilla
arch: src
version: 1.5
epoch: 0
release: 10.fc23
summary: Handles submission/update of bugzilla bugs via WWW::Mechanize
url: http://search.cpan.org/dist/WWW-Bugzilla/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder20.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-WWW-Bugzilla-1.5-10.fc23.src.rpm
checksum_type: sha256
description:
  This module provides a perl API for adding and updating Bugzilla bugs.
  It can be useful in writing custom frontends to a Bugzilla server, and
  the frontends do not have to sit on the same server as long as they
  can reach it via HTTP.


pkgId: 8ce67b365a5d3cd4e5463000e5b04ebd72bfa76e4d4708b2965d95b6abd90964
name: perl-WWW-DuckDuckGo
arch: src
version: 0.016
epoch: 0
release: 4.fc23
summary: Access to the DuckDuckGo APIs
url: http://search.cpan.org/dist/WWW-DuckDuckGo/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-06.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-WWW-DuckDuckGo-0.016-4.fc23.src.rpm
checksum_type: sha256
description:
  This distribution gives you an easy access to the DuckDuckGo Zero Click
  Info API. It tries to connect via HTTPS first and falls back to HTTP if
  there is a failure.


pkgId: eeaa45e35926546e7292bf1d40e241ac5eb149427f5780fc99ffbe6a53256f4c
name: perl-WWW-GoodData
arch: src
version: 1.11
epoch: 0
release: 5.fc23
summary: Client library for GoodData REST-ful API
url: http://search.cpan.org/dist/WWW-GoodData/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-04.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-WWW-GoodData-1.11-5.fc23.src.rpm
checksum_type: sha256
description:
  WWW::GoodData is the client for GoodData JSON-based API built atop
  WWW::GoodData::Agent client agent, with focus on usefulness and
  correctness of implementation.


pkgId: 504cf51fa1f98665a04c30660ac8baaac6661152560cd19c538391c81e2cc794
name: perl-WWW-Google-Contacts
arch: src
version: 0.38
epoch: 0
release: 5.fc23
summary: Use Perl to access, list and edit Google Contacts
url: http://search.cpan.org/dist/WWW-Google-Contacts/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-04.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-WWW-Google-Contacts-0.38-5.fc23.src.rpm
checksum_type: sha256
description:
  This module implements 'Google Contacts Data API' according to
  http://code.google.com/apis/contacts/docs/3.0/developers_guide_protocol.html


pkgId: 71f42f4ae20f5fb8fab54a24b23973f19f7678f7bcd147c968f2d2bfa81c6a0d
name: perl-WWW-Mechanize
arch: src
version: 1.75
epoch: 0
release: 3.fc23
summary: Automates web page form & link interaction
url: http://search.cpan.org/dist/WWW-Mechanize/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder21.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-WWW-Mechanize-1.75-3.fc23.src.rpm
checksum_type: sha256
description:
  "WWW::Mechanize", or Mech for short, helps you automate interaction
  with a website.  It supports performing a sequence of page fetches
  including following links and submitting forms. Each fetched page is
  parsed and its links and forms are extracted. A link or a form can be
  selected, form fields can be filled and the next page can be fetched.
  Mech also stores a history of the URLs you've visited, which can be
  queried and revisited.


pkgId: 7c490e67b2b68dce335797b9cc7f7aa989d8b724b6007a4beafd2d5ee18c4bea
name: perl-WWW-Mechanize-GZip
arch: src
version: 0.12
epoch: 0
release: 17.fc23
summary: Fetch compressed web pages
url: http://search.cpan.org/dist/WWW-Mechanize-GZip
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-06.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-WWW-Mechanize-GZip-0.12-17.fc23.src.rpm
checksum_type: sha256
description:
  The WWW::Mechanize::GZip module tries to fetch a URL by requesting
  gzip-compression from the web server.  If the response contains
  a header with 'Content-Encoding: gzip', it decompresses the response in
  order to get the original (uncompressed) content. This module will help
  to reduce bandwidth fetching web pages, if supported by the web server.
  If the web server does not support gzip-compression, no decompression
  will be made.


pkgId: 3ade280e4d25fb8850cc37b251f42e7c935ca70b525fe1516c6c675ceb26b39e
name: perl-WWW-OrangeHRM-Client
arch: src
version: 0.9.1
epoch: 0
release: 3.fc23
summary: Client for OrangeHRM
url: http://ppisar.fedorapeople.org/WWW-OrangeHRM-Client/
rpm_license: GPL+
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-10.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-WWW-OrangeHRM-Client-0.9.1-3.fc23.src.rpm
checksum_type: sha256
description:
  This module implements client for OrangeHRM information system. It has been
  developed against Red Hat instance, so I cannot guarantee it works with
  other instances.


pkgId: 07296e1b5eca2d087e9dabf4a3951e32289ff51ebe6d60fd2ae6c20f4a5cb65f
name: perl-WWW-RobotRules
arch: src
version: 6.02
epoch: 0
release: 12.fc23
summary: Database of robots.txt-derived permissions
url: http://search.cpan.org/dist/WWW-RobotRules/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-06.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-WWW-RobotRules-6.02-12.fc23.src.rpm
checksum_type: sha256
description:
  This module parses /robots.txt files as specified in "A Standard for Robot
  Exclusion", at <http://www.robotstxt.org/wc/norobots.html>. Webmasters can
  use the /robots.txt file to forbid conforming robots from accessing parts
  of their web site.


pkgId: 6533d9e377a42765c77faccc0c368fda231f05efd0af58249bff9ab286aa3742
name: perl-WWW-Salesforce
arch: src
version: 0.22
epoch: 0
release: 1.fc23
summary: Simple abstraction layer between SOAP::Lite and Salesforce.com
url: http://search.cpan.org/dist/WWW-Salesforce/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder20.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-WWW-Salesforce-0.22-1.fc23.src.rpm
checksum_type: sha256
description:
  This class provides a simple abstraction layer between SOAP::Lite and
  Salesforce.com. Because SOAP::Lite does not support complexTypes, and
  document/literal encoding is limited, this module works around those
  limitations and provides a more intuitive interface a developer can
  interact with.


pkgId: 63471a2a3a4388e2b2575a3adc500f441dd0b50161aa5648e9b1fab838ffba9d
name: perl-WWW-Search
arch: src
version: 2.514
epoch: 0
release: 1.fc23
summary: Virtual base class for WWW searches
url: http://search.cpan.org/dist/WWW-Search/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-02.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-WWW-Search-2.514-1.fc23.src.rpm
checksum_type: sha256
description:
  This class is the parent for all access methods supported by the WWW::Search
  library. This library implements a Perl API to web-based search engines. See
  README for a list of search engines currently supported, and for a lot of
  interesting high-level information about this distribution. Search results can
  be limited, and there is a pause between each request to avoid overloading
  either the client or the server.


pkgId: f64ace11e14c6de06315a31f3fdb5f83db5ed64ab548b57252e95b70867fe614
name: perl-WWW-Shorten
arch: src
version: 3.06
epoch: 0
release: 3.fc23
summary: Interface to URL shortening sites
url: http://search.cpan.org/dist/WWW-Shorten/
rpm_license: Artistic 2.0
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-09.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-WWW-Shorten-3.06-3.fc23.src.rpm
checksum_type: sha256
description:
  A unified interface to various URL shortening services on the web, such as
  TinyURL or makeashorterlink.com.


pkgId: 6ad37112ba5f9ce13bff47870a4c6a26481b8b7560b71059eeab68d9193e596d
name: perl-WWW-Splunk
arch: src
version: 2.05
epoch: 0
release: 6.fc23
summary: Client for Splunk log search engine
url: http://search.cpan.org/dist/WWW-Splunk/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder17.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-WWW-Splunk-2.05-6.fc23.src.rpm
checksum_type: sha256
description:
  WWW::Splunk is a client for Splunk log search engine. It consists of a utility
  with command-line interface, sc, and a supporting library. It lets you query
  the archived logs or conduct a real-time search.


pkgId: af16965f60a84cb94cf6d767ed651c53087e8ffbd0f7827df8767feeffdceaa0
name: perl-Want
arch: src
version: 0.26
epoch: 0
release: 3.fc23
summary: Perl module implementing a generalisation of wantarray
url: http://search.cpan.org/dist/Want/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder19.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Want-0.26-3.fc23.src.rpm
checksum_type: sha256
description:
  This module generalises the mechanism of the wantarray
  function, allowing a function to determine in some detail
  how its return value is going to be immediately used.


pkgId: 3b92c8ff8044bd66089cf0dd098a113ba49e51790f823d9b27f48bd0ab5f6ab5
name: perl-Web-Scraper
arch: src
version: 0.38
epoch: 0
release: 3.fc23
summary: Web Scraping Toolkit using HTML and CSS Selectors or XPath expressions
url: http://search.cpan.org/dist/Web-Scraper/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-24.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Web-Scraper-0.38-3.fc23.src.rpm
checksum_type: sha256
description:
  Web::Scraper is a web scraper toolkit, inspired by Ruby's equivalent
  Scrapi. It provides a DSL-ish interface for traversing HTML documents and
  returning a neatly arranged Perl data structure.


pkgId: 6d2631b6a990643d0cf906843862a7cc2d08eaa36337a471b83845914e50a58e
name: perl-WebService-Dropbox
arch: src
version: 1.22
epoch: 0
release: 4.fc23
summary: Perl interface to Dropbox API
url: http://search.cpan.org/dist/WebService-Dropbox/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder19.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-WebService-Dropbox-1.22-4.fc23.src.rpm
checksum_type: sha256
description:
  This package provdes a Perl interface to Dropbox API with following features:
  - Support Dropbox v1 REST API
  - Support Furl (Fast!!!)
  - Streaming IO (Low Memory)
  - Default URI Escape (The specified path is UTF-8 decoded string)


pkgId: 6c0061f9c7ef1c7074af2c9a47f3461760620bbacb9aad487eca04e4c4ead259
name: perl-WebService-Linode
arch: src
version: 0.27
epoch: 0
release: 3.fc23
summary: Perl Interface to the Linode.com API
url: http://search.cpan.org/dist/WebService-Linode/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm02-builder03.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-WebService-Linode-0.27-3.fc23.src.rpm
checksum_type: sha256
description:
  This module implements the Linode.com api methods. Linode methods have had
  dots replaced with underscores to generate the perl method name. All keys
  and parameters have been lower cased but returned data remains otherwise
  the same. For additional information see http://www.linode.com/api/ .


pkgId: 906a70523d84e7e73769fbd852f2be5320b1cbe69d35e437f0d4f409822efa93
name: perl-WebService-Rajce
arch: src
version: 1.15.2450
epoch: 0
release: 1.fc23
summary: Perl interface for www.rajce.idnes.cz
url: http://search.cpan.org/dist/WebService-Rajce/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-13.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-WebService-Rajce-1.15.2450-1.fc23.src.rpm
checksum_type: sha256
description:
  This is a Perl library implementing an API of a photo gallery service running
  on www.rajce.idnes.cz server.


pkgId: 04c1bcb12655faa1c176e4c4527eb517549d4db515796399bd02bb5655717394
name: perl-WebService-Validator-CSS-W3C
arch: src
version: 0.3
epoch: 0
release: 7.fc23
summary: Interface to the W3C CSS Validator
url: http://search.cpan.org/dist/WebService-Validator-CSS-W3C/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-09.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-WebService-Validator-CSS-W3C-0.3-7.fc23.src.rpm
checksum_type: sha256
description:
  This module is an interface to the W3C CSS Validation online service
  <http://jigsaw.w3.org/css-validator/>, based on its SOAP 1.2 support.
  It helps to find errors in Cascading Style Sheets.


pkgId: 0790ce1dc30f6eaadbf6d0a0c9580a279876b0ec86fde4516b3a9a7509b80d94
name: perl-WebService-Validator-HTML-W3C
arch: src
version: 0.28
epoch: 0
release: 10.fc23
summary: Access the W3Cs online HTML validator
url: http://search.cpan.org/dist/WebService-Validator-HTML-W3C/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-02.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-WebService-Validator-HTML-W3C-0.28-10.fc23.src.rpm
checksum_type: sha256
description:
  WebService::Validator::HTML::W3C provides access to the W3C's online Markup
  validator. As well as reporting on whether a page is valid it also provides
  access to a detailed list of the errors and where in the validated document
  they occur.


pkgId: 801d1988876710964408de4913d59b1aad9095700736a54dc4a4b7261cc4cc63
name: perl-Workflow
arch: src
version: 1.41
epoch: 0
release: 4.fc23
summary: Simple, flexible system to implement workflows
url: http://search.cpan.org/dist/Workflow/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-16.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Workflow-1.41-4.fc23.src.rpm
checksum_type: sha256
description:
  The 'Workflow' Perl module implements a standalone workflow system. It
  aims to be simple but flexible and therefore powerful. Each piece of
  the workflow system has a direct and easily stated job, and hopefully
  you'll find that you can put the pieces together to create very useful
  systems.


pkgId: 88634262fa5ddd69db555a691eb47509f647bb5410ae819aba8bc0f44f406965
name: perl-Wx
arch: src
version: 0.9927
epoch: 0
release: 4.fc23
summary: Interface to the wxWidgets cross-platform GUI toolkit
url: http://search.cpan.org/dist/Wx/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder21.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Wx-0.9927-4.fc23.src.rpm
checksum_type: sha256
description:
  The Wx module is a wrapper for the wxWidgets (formerly known as
  wxWindows) GUI toolkit.

  This module comes with extensive documentation in HTML format;
  you can download it from http://wxperl.sourceforge.net/.


pkgId: 221827d1a91c4e90862242ae15549d4d08e4ffb2b864ff1f8956461ee153324f
name: perl-Wx-Perl-DataWalker
arch: src
version: 0.02
epoch: 0
release: 21.fc23
summary: Implement subclass that shows relatively simple structure
url: http://search.cpan.org/dist/Wx-Perl-DataWalker/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-19.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Wx-Perl-DataWalker-0.02-21.fc23.src.rpm
checksum_type: sha256
description:
  Wx::Perl::DataWalker implements a Wx::Frame subclass that shows a
  relatively simple Perl data structure browser. After opening such a frame
  and supplying it with a reference to an essentially arbitrary data
  structure, you can visually browse it by double-clicking references.


pkgId: 09bbeb6d067ae6f4bb5f0bd70af6b9846b5a215e321c156e5ce094be3f6d8817
name: perl-Wx-Perl-ProcessStream
arch: src
version: 0.32
epoch: 0
release: 9.fc23
summary: Access IO of external processes via events
url: http://search.cpan.org/dist/Wx-Perl-ProcessStream/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder20.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-Wx-Perl-ProcessStream-0.32-9.fc23.src.rpm
checksum_type: sha256
description:
  This module provides the STDOUT, STDERR and exit codes of asynchronously
  running processes via events. It may be used for long running or blocking
  processes that provide periodic updates on state via STDOUT. Simple IPC is
  possible via STDIN.


pkgId: 5b74cf5666b17109aa8aa8b0d0273f4d238af87b23776ae99ece541aec21644c
name: perl-X11-GUITest
arch: src
version: 0.28
epoch: 0
release: 6.fc23
summary: Provides GUI testing/interaction routines
url: http://search.cpan.org/dist/X11-GUITest/
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder08.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-X11-GUITest-0.28-6.fc23.src.rpm
checksum_type: sha256
description:
  This Perl package is intended to facilitate the testing of GUI applications
  by means of user emulation. It can be used to test/interact with GUI
  applications; which have been built upon the X library or toolkits (i.e.,
  GTK+, Xt, Qt, Motif, etc.) that "wrap" the X library's functionality.


pkgId: f62b40441c02b6d12c3c8e8d14c6ba2ae8cc6377b16c7e5701ebb8d6549d428a
name: perl-X11-Protocol
arch: src
version: 0.56
epoch: 0
release: 20.fc23
summary: X11-Protocol - Raw interface to X Window System servers
url: http://search.cpan.org/dist/X11-Protocol/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-07.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-X11-Protocol-0.56-20.fc23.src.rpm
checksum_type: sha256
description:
  X11::Protocol is a client-side interface to the X11 Protocol (see X(1) for
  information about X11), allowing perl programs to display windows and
  graphics on X11 servers.

  A full description of the protocol is beyond the scope of this documentation;
  for complete information, see the I<X Window System Protocol, X Version 11>,
  available as Postscript or *roff source from C<ftp://ftp.x.org>, or
  I<Volume 0: X Protocol Reference Manual> of O'Reilly & Associates's series of
  books about X (ISBN 1-56592-083-X, C<http://www.oreilly.com>), which contains
  most of the same information.


pkgId: fab82f8076c3afcffea64b70d2a1d01651c95ebdb8528589d5c617d5dc76077c
name: perl-XML-Atom
arch: src
version: 0.41
epoch: 0
release: 12.fc23
summary: Atom feed and API implementation
url: http://search.cpan.org/dist/XML-Atom/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-05.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-Atom-0.41-12.fc23.src.rpm
checksum_type: sha256
description:
  Atom is a syndication, API, and archiving format for web blogs and other
  data. XML::Atom implements the feed format as well as a client for the API.


pkgId: c69f6306687fe75d80cedceb3f0c102963ebb62f5be80760e986c7abbee9c8c3
name: perl-XML-Atom-SimpleFeed
arch: src
version: 0.861
epoch: 0
release: 3.fc23
summary: No-fuss generation of Atom syndication feeds
url: http://search.cpan.org/dist/XML-Atom-SimpleFeed/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-02.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-Atom-SimpleFeed-0.861-3.fc23.src.rpm
checksum_type: sha256
description:
  This module provides a minimal API for generating Atom syndication feeds
  quickly and easily. It supports all aspects of the Atom format, but it has
  no provisions for generating feeds with extension elements.


pkgId: 54f0aa59beda97effac395c3c9ce2324da76e81bb3c66943306aa02358c5878d
name: perl-XML-Bare
arch: src
version: 0.53
epoch: 0
release: 7.fc23
summary: Minimal XML parser implemented via a C state engine
url: http://search.cpan.org/dist/XML-Bare/
rpm_license: GPLv2+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm04-builder17.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-Bare-0.53-7.fc23.src.rpm
checksum_type: sha256
description:
  This module is a 'Bare' XML parser. It is implemented in C. The parser
  itself is a simple state engine that is less than 500 lines of C. The
  parser builds a C struct tree from input text. That C struct tree is
  converted to a Perl hash by a Perl function that makes basic calls back to
  the C to go through the nodes sequentially.


pkgId: 1469935aeabd9f549d7c48c292a493570de249781f61724a8be2b9e4054ce9fc
name: perl-XML-Catalog
arch: src
version: 1.03
epoch: 0
release: 5.fc23
summary: Resolve public identifiers and remap system identifiers
url: http://search.cpan.org/dist/XML-Catalog/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder21.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-Catalog-1.03-5.fc23.src.rpm
checksum_type: sha256
description:
  This module implements draft 0.4 of John Cowan's XML Catalog (formerly
  known as XCatalog) see
  (<https://www.oasis-open.org/committees/entity/specs/cs-entity-xml-catalogs-1.0.html>)
  Catalogs may be written in either SOCAT or XML syntax. XML::Catalog will
  assume SOCAT syntax if the catalog is not in well-formed XML syntax.


pkgId: 94ef850b45048e0940a60d8347b64e912aed00941339ea5f20da61b65e340fa1
name: perl-XML-DOM
arch: src
version: 1.44
epoch: 0
release: 24.fc23
summary: DOM extension to XML::Parser
url: http://search.cpan.org/dist/XML-DOM/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-03.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-DOM-1.44-24.fc23.src.rpm
checksum_type: sha256
description:
  This is a Perl extension to XML::Parser. It adds a new 'Style' to
  XML::Parser, called 'DOM', that allows XML::Parser to build an Object
  Oriented data structure with a DOM Level 1 compliant interface. For a
  description of the DOM (Document Object Model), see
  <http://www.w3.org/DOM/>.


pkgId: 533610d452e95830987abc545e101b3bcbe059c15c9af403fef2af6456b79c05
name: perl-XML-DOM-XPath
arch: src
version: 0.14
epoch: 0
release: 21.fc23
summary: Perl extension to add XPath support to XML::DOM, using XML::XPath engine
url: http://search.cpan.org/dist/XML-DOM-XPath/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-08.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-DOM-XPath-0.14-21.fc23.src.rpm
checksum_type: sha256
description:
  XML::DOM::XPath allows you to use XML::XPath methods to query a DOM. This
  is often much easier than relying only on getElementsByTagName.


pkgId: 24bf18d037b3dd2f87f209475121f51519d96b41863c625b19a10579fce81e18
name: perl-XML-DTDParser
arch: src
version: 2.01
epoch: 0
release: 13.fc23
summary: Quick and dirty DTD parser
url: http://search.cpan.org/dist/XML-DTDParser/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-06.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-DTDParser-2.01-13.fc23.src.rpm
checksum_type: sha256
description:
  This module parses a DTD file and creates a data structure containing info
  about all tags, their allowed parameters, children, parents, optionality,
  and others.


pkgId: 8f3380aac531e696b747be5a45f7ca3d559fbe018e22deb2f4a8b48a08fd68e1
name: perl-XML-DifferenceMarkup
arch: src
version: 1.05
epoch: 0
release: 6.fc23
summary: XML diff and merge
url: http://search.cpan.org/dist/XML-DifferenceMarkup/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder11.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-DifferenceMarkup-1.05-6.fc23.src.rpm
checksum_type: sha256
description:
  This module implements an XML diff producing XML output. Both input and
  output are DOM documents, as implemented by XML::LibXML.


pkgId: 2ba0163aaf9b2d65c426aa21448b192b5d874ebbc6237bb15a0a86d470fdb9b3
name: perl-XML-Dumper
arch: src
version: 0.81
epoch: 0
release: 23.fc23
summary: Perl module for dumping Perl objects from/to XML
url: http://search.cpan.org/dist/XML-Dumper/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder19.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-Dumper-0.81-23.fc23.src.rpm
checksum_type: sha256
description:
  XML::Dumper dumps Perl data to XML format. XML::Dumper can also read
  XML data that were previously dumped by the module and convert it back
  to Perl. Perl objects are blessed back to their original packaging;
  if the modules are installed on the system where the perl objects are
  reconstituted from xml, they will behave as expected. Intuitively, if
  the perl objects are converted and reconstituted in the same
  environment, all should be well.


pkgId: a87c5c05f158876382d2b502f3449eaf4e955212af65c2468c4f206714d12529
name: perl-XML-Entities
arch: src
version: 1.0001
epoch: 0
release: 1.fc23
summary: Decode strings with XML entities
url: http://search.cpan.org/dist/XML-Entities/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-09.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-Entities-1.0001-1.fc23.src.rpm
checksum_type: sha256
description:
  This module provides a mapping from the standard XML entities to their Unicode
  characters. A function for decoding is provided. The mapping can be generated
  from a DTD file with entity definitions.


pkgId: 3202853a754933bfb51e2a9a1eaa104c4a5734657697d1eb889156a21bebb113
name: perl-XML-Feed
arch: src
version: 0.52
epoch: 0
release: 7.fc23
summary: Syndication feed parser and auto-discovery
url: http://search.cpan.org/dist/XML-Feed/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-04.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-Feed-0.52-7.fc23.src.rpm
checksum_type: sha256
description:
  XML::Feed is a syndication feed parser for both RSS and Atom feeds. It also
  implements feed auto-discovery for finding feeds, given a URI.


pkgId: e61e7504bc5e5da632c34bbc8b74fb1f4ef48895ea2ea8caed8a4b47ffa6b3fe
name: perl-XML-Filter-BufferText
arch: src
version: 1.01
epoch: 0
release: 23.fc23
summary: Filter to put all characters() in one event
url: http://search.cpan.org/dist/XML-Filter-BufferText/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder04.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-Filter-BufferText-1.01-23.fc23.src.rpm
checksum_type: sha256
description:
  This is a very simple filter. One common cause of grief (and programmer
  error) is that XML parsers aren't required to provide character events in
  one chunk. They can, but are not forced to, and most don't. This filter
  does the trivial but oft-repeated task of putting all characters into a
  single event.


pkgId: f79306084f2cca57a18905bd8e904145bcee80762a01d0838462f1122599f6f4
name: perl-XML-Filter-XInclude
arch: src
version: 1.0
epoch: 0
release: 20.fc23
summary: XInclude as a SAX Filter
url: http://search.cpan.org/dist/XML-Filter-XInclude/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-08.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-Filter-XInclude-1.0-20.fc23.src.rpm
checksum_type: sha256
description:
  This module implements a simple SAX filter that provides XInclude support.
  It does NOT support XPointer.


pkgId: f1929bf707659bd60f8df7f13dd81f6af98b251431cdf9fb3fa08d9a63263646
name: perl-XML-Grove
arch: src
version: 0.46alpha
epoch: 0
release: 58.fc23
summary: Simple access to infoset of parsed XML, HTML, or SGML instances
url: http://search.cpan.org/dist/XML-Grove/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder21.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-Grove-0.46alpha-58.fc23.src.rpm
checksum_type: sha256
description:
  XML::Grove is a tree-based object model for accessing the information
  set of parsed or stored XML, HTML, or SGML instances. XML::Grove
  objects are Perl hashes and arrays where you access the properties of
  the objects using normal Perl syntax.


pkgId: 42aba003a69964d6f2fa7bd50abe575f86807d826f532963b980ca79a33a1238
name: perl-XML-Hash-LX
arch: src
version: 0.06.03
epoch: 0
release: 8.fc23
summary: Convert hash to XML and XML to hash using LibXML
url: http://search.cpan.org/dist/XML-Hash-LX/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder10.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-Hash-LX-0.06.03-8.fc23.src.rpm
checksum_type: sha256
description:
  This module is a companion for XML::LibXML. It operates with LibXML
  objects, could return or accept LibXML objects, and may be used for
  easy data transformations.


pkgId: 8bf0eaa0e1a636cd0b47f3d977077998f50b26a55e1a6e2dd533f82679e4229e
name: perl-XML-LibXML
arch: src
version: 2.0121
epoch: 1
release: 5.fc23
summary: Perl interface to the libxml2 library
url: http://search.cpan.org/dist/XML-LibXML/
rpm_license: (GPL+ or Artistic) and MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder11.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-LibXML-2.0121-5.fc23.src.rpm
checksum_type: sha256
description:
  This module implements a Perl interface to the GNOME libxml2 library
  which provides interfaces for parsing and manipulating XML files. This
  module allows Perl programmers to make use of the highly capable
  validating XML parser and the high performance DOM implementation.


pkgId: f9e090b9eec699f95e385bec20a38b0074e57b84a3f9838d873a31151fbbbe23
name: perl-XML-LibXML-Simple
arch: src
version: 0.95
epoch: 0
release: 3.fc23
summary: Read XML strings or files
url: http://search.cpan.org/dist/XML-LibXML-Simple/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-06.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-LibXML-Simple-0.95-3.fc23.src.rpm
checksum_type: sha256
description:
  This Perl module reads XML from strings or files.  It is a blunt rewrite
  of XML::Simple (by Grant McLean) to use the XML::LibXML parser for XML
  structures, where the original uses plain Perl or SAX parsers.


pkgId: 97d6e43604f2c7a2566a0843e6b63e455c6751d141996dc5fda2d4f90692257b
name: perl-XML-LibXSLT
arch: src
version: 1.94
epoch: 0
release: 3.fc23
summary: Perl module for interfacing to GNOME's libxslt
url: http://search.cpan.org/dist/XML-LibXSLT/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder12.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-LibXSLT-1.94-3.fc23.src.rpm
checksum_type: sha256
description:
  This module is a fast XSLT library, based on the Gnome libxslt engine
  that you can find at http://www.xmlsoft.org/XSLT/


pkgId: d75b4c4a9340d29640b7a0531b17556cc1e51ef9d7b159586cb8f3bb92b30cf6
name: perl-XML-Merge
arch: src
version: 1.2.565EgGd
epoch: 0
release: 20.fc23
summary: Flexibly merge XML documents
url: http://search.cpan.org/dist/XML-Merge/
rpm_license: GPLv2
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-05.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-Merge-1.2.565EgGd-20.fc23.src.rpm
checksum_type: sha256
description:
  This module inherits from XML::Tidy which in turn inherits from XML::XPath.
  This ensures that Merge objects' indenting can be tidied up after any merge
  operation since such modification usually spells the ruination of indentation.
  Polymorphism allows Merge objects to be utilized as normal XML::XPath objects
  as well.
  The merging behavior is setup to combine separate XML documents according to
  certain rules and configurable options. If both documents have root nodes which
  are elements of the same name, the documents are merged directly. Otherwise,
  one is merged as a child of the other. An optional XPath location can be
  specified as the place to perform the merge. If no location is specified, the
  merge is attempted at the first matching element or is appended as the new last
  child of the other root if no match is found.


pkgId: a9806849ecc6ac5fb31d43f049e3848182385ceea61077f0aa9b3be7bbfa0faa
name: perl-XML-NamespaceSupport
arch: src
version: 1.11
epoch: 0
release: 16.fc23
summary: A simple generic namespace support class
url: http://search.cpan.org/dist/XML-NamespaceSupport/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder06.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-NamespaceSupport-1.11-16.fc23.src.rpm
checksum_type: sha256
description:
  This module offers a simple to process namespaced XML names (unames) from
  within any application that may need them. It also helps maintain a prefix
  to namespace URI map, and provides a number of basic checks.


pkgId: f8d1f0f7191b7d01b9c5f3d9ba9f4346de61f206d3ab626061fe46c3b4092e40
name: perl-XML-Parser
arch: src
version: 2.44
epoch: 0
release: 3.fc23
summary: Perl module for parsing XML documents
url: http://search.cpan.org/dist/XML-Parser/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder20.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-Parser-2.44-3.fc23.src.rpm
checksum_type: sha256
description:
  This module provides ways to parse XML documents. It is built on top
  of XML::Parser::Expat, which is a lower level interface to James
  Clark's expat library. Each call to one of the parsing methods creates
  a new instance of XML::Parser::Expat which is then used to parse the
  document. Expat options may be provided when the XML::Parser object is
  created. These options are then passed on to the Expat object on each
  parse call. They can also be given as extra arguments to the parse
  methods, in which case they override options given at XML::Parser
  creation time.


pkgId: 5d9da4e7607993a3583a9a4e8c1787fb3070e525c2da92ff0622e79350068eb8
name: perl-XML-Parser-Lite
arch: src
version: 0.721
epoch: 0
release: 2.fc23
summary: Lightweight regexp-based XML parser
url: http://search.cpan.org/dist/XML-Parser-Lite/
rpm_license: (GPL+ or Artistic) and REX
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder06.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-Parser-Lite-0.721-2.fc23.src.rpm
checksum_type: sha256
description:
  This Perl module implements an XML parser with an interface similar to
  XML::Parser.  Though not all callbacks are supported, you should be able to
  use it in the same way you use XML::Parser.


pkgId: 21137c56fd7f11c3e8d71fba3206aeaa195dbd07011a5728142b77282b08f48a
name: perl-XML-Parser-Lite-Tree
arch: src
version: 0.14
epoch: 0
release: 11.fc23
summary: Lightweight XML tree builder
url: http://search.cpan.org/dist/XML-Parser-Lite-Tree/
rpm_license: Artistic 2.0
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-09.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-Parser-Lite-Tree-0.14-11.fc23.src.rpm
checksum_type: sha256
description:
  This is a singleton class for parsing XML into a tree structure. How does
  this differ from other XML tree generators? By using XML::Parser::Lite,
  which is a pure perl XML parser. Using this module you can tree-ify simple
  XML without having to compile any C.


pkgId: 894a366c23fe5fcb3aa2390743a7eaecb0aea5749e529761b8899472ebe5affb
name: perl-XML-Parser-Lite-Tree-XPath
arch: src
version: 0.24
epoch: 0
release: 12.fc23
summary: XPath access to XML::Parser::Lite::Tree structures
url: http://search.cpan.org/dist/XML-Parser-Lite-Tree-XPath/
rpm_license: Artistic 2.0
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-24.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-Parser-Lite-Tree-XPath-0.24-12.fc23.src.rpm
checksum_type: sha256
description:
  This pure-Perl implementation of XPath is a complement to
  XML::Parser::Lite::Tree, a pure-Perl XML tree parser and builder. It aims
  to implement 100% of the W3C XPath specification.


pkgId: 64831b3b04f5b2a00b71ecf5b633f7c1f2e30d11d818a61d88f479076cd9054f
name: perl-XML-RSS-LibXML
arch: src
version: 0.3105
epoch: 0
release: 3.fc23
summary: XML::RSS with XML::LibXML
url: http://search.cpan.org/dist/XML-RSS-LibXML/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-04.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-RSS-LibXML-0.3105-3.fc23.src.rpm
checksum_type: sha256
description:
  XML::RSS::LibXML uses XML::LibXML (libxml2) for parsing RSS instead of
  XML::RSS' XML::Parser (expat), while trying to keep interface compatibility
  with XML::RSS.


pkgId: 51b09d99c15d75c83b0f65c334861c2ddbff0344b6eecfe56cb8dffce5d5e2fc
name: perl-XML-RegExp
arch: src
version: 0.04
epoch: 0
release: 8.fc23
summary: Regular expressions for XML tokens
url: http://search.cpan.org/dist/XML-RegExp/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder19.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-RegExp-0.04-8.fc23.src.rpm
checksum_type: sha256
description:
  This package contains an utility module containing regular expressions
  for the following XML tokens: BaseChar, Ideographic, Letter, Digit,
  Extender, CombiningChar, NameChar, EntityRef, CharRef, Reference,
  Name, NmToken, and AttValue.


pkgId: 2fe0cb8cbf62775cd73b36dcbb9aa1f917860b750b1e6968843a85687fa5cca8
name: perl-XML-Rules
arch: src
version: 1.16
epoch: 0
release: 8.fc23
summary: Parse XML and specify what and how to keep/process for individual tags
url: http://search.cpan.org/dist/XML-Rules
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder14.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-Rules-1.16-8.fc23.src.rpm
checksum_type: sha256
description:
  The XML::Rules module provides an API layer on top of XML::Parser.  It
  allows you to specify rules that are subroutines to be run once a tag
  is fully parsed and either process the data from the tag itself and
  its children or specify what parts of the data and how to add to the
  data structure being built for the parent tag.


pkgId: 1a26e800c9e600c84fc4d7f024c1f36e48a9a8d6854ff8427999180660f69ceb
name: perl-XML-SAX
arch: src
version: 0.99
epoch: 0
release: 15.fc23
summary: SAX parser access API for Perl
url: http://search.cpan.org/dist/XML-SAX/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder17.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-SAX-0.99-15.fc23.src.rpm
checksum_type: sha256
description:
  XML::SAX consists of several framework classes for using and building
  Perl SAX2 XML parsers, filters, and drivers. It is designed around the
  need to be able to "plug in" different SAX parsers to an application
  without requiring programmer intervention. Those of you familiar with
  the DBI will be right at home. Some of the designs come from the Java
  JAXP specification (SAX part), only without the javaness.


pkgId: a2adf710372411aadb35901db36181717135e80c74856c0b994cd95a16d9dfae
name: perl-XML-SAX-Base
arch: src
version: 1.08
epoch: 0
release: 14.fc23
summary: Base class SAX drivers and filters
url: http://search.cpan.org/dist/XML-SAX-Base/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-12.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-SAX-Base-1.08-14.fc23.src.rpm
checksum_type: sha256
description:
  This module has a very simple task - to be a base class for Perl SAX drivers
  and filters. Its default behavior is to pass the input directly to the
  output unchanged. It can be useful to use this module as a base class so
  you don't have to, for example, implement the characters() callback.


pkgId: e4366019600d5285a3261df1b5dce4e310e0c7c984050320e6b41be8dd751ad0
name: perl-XML-SAX-ExpatXS
arch: src
version: 1.33
epoch: 0
release: 12.fc23
summary: Perl SAX 2 XS extension to Expat parser
url: http://search.cpan.org/dist/XML-SAX-ExpatXS/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder21.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-SAX-ExpatXS-1.33-12.fc23.src.rpm
checksum_type: sha256
description:
  XML::SAX::ExpatXS is a direct XS extension to Expat XML parser. It
  implements Perl SAX 2.1 interface. See http://perl-xml.sourceforge.net/perl-
  sax/ for Perl SAX API description. Any deviations from the Perl SAX 2.1
  specification are considered as bugs.


pkgId: bfccfe2570479cd7fbd35c6d677fd7a45f5081549b9bbe5a2a32af727cdb6457
name: perl-XML-SemanticDiff
arch: src
version: 1.0004
epoch: 0
release: 4.fc23
summary: Perl extension for comparing XML documents
url: http://search.cpan.org/dist/XML-SemanticDiff/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-11.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-SemanticDiff-1.0004-4.fc23.src.rpm
checksum_type: sha256
description:
  XML::SemanticDiff provides a way to compare the contents and structure of two
  XML documents. By default, it returns a list of hashrefs where each hashref
  describes a single difference between the two docs.


pkgId: 4f90f65e1ac20446d51e875a9a2530a916ee09828ddb0f75bae2e109e5fea235
name: perl-XML-Simple
arch: src
version: 2.20
epoch: 0
release: 11.fc23
summary: Easy API to maintain XML in Perl
url: http://search.cpan.org/dist/XML-Simple/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder19.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-Simple-2.20-11.fc23.src.rpm
checksum_type: sha256
description:
  The XML::Simple module provides a simple API layer on top of an
  underlying XML parsing module (either XML::Parser or one of the SAX2
  parser modules).


pkgId: 4d26819c1c166e39329eeb7aa03a09df60916340cc02a064676f6cdfc7600c0b
name: perl-XML-Simple-DTDReader
arch: src
version: 0.04
epoch: 0
release: 20.fc23
summary: Simple XML file reading based on their DTDs
url: http://search.cpan.org/dist/XML-Simple-DTDReader/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-12.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-Simple-DTDReader-0.04-20.fc23.src.rpm
checksum_type: sha256
description:
  XML::Simple::DTDReader aims to be a XML::Simple drop-in replacement, but
  with several aspects of the module controlled by the XML's DTD.
  Specifically, array folding and array forcing are inferred from the DTD.


pkgId: 79599848fc51172cbea6118d7fcd807e0572d8a7d18528640eca5353011819dc
name: perl-XML-Smart
arch: src
version: 1.79
epoch: 0
release: 6.fc23
summary: Smart, easy and powerful way to access/create XML files/data
url: http://search.cpan.org/dist/XML-Smart/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm04-builder19.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-Smart-1.79-6.fc23.src.rpm
checksum_type: sha256
description:
  This module provides an easy way to access/create XML data. It's based on a
  HASH tree created from the XML data, and enables dynamic access to it
  through the standard Perl syntax for Hash and Array, without necessarily
  caring about which you are working with. In other words, each point in the
  tree works as a Hash and an Array at the same time!


pkgId: 51461bf121fe6f130c630927e1881293634c0a8223cbc112dc45084f1902de0a
name: perl-XML-Stream
arch: src
version: 1.24
epoch: 0
release: 3.fc23
summary: XML::Stream - streaming XML library
url: http://search.cpan.org/dist/XML-Stream/
rpm_license: (GPL+ or Artistic) or LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-11.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-Stream-1.24-3.fc23.src.rpm
checksum_type: sha256
description:
  This module provides the user with methods to connect to a remote server,
  send a stream of XML to the server, and receive/parse an XML stream from
  the server.  It is primarily based work for the Etherx XML router
  developed by the Jabber Development Team.  For more information about this
  project visit http://etherx.jabber.org/stream/.

  XML::Stream gives the user the ability to define a central callback that
  will be used to handle the tags received from the server.  These tags are
  passed in the format defined at instantiation time.  the closing tag of an
  object is seen, the tree is finished and passed to the call back function.
  What the user does with it from there is up to them.

  For a detailed description of how this module works, and about the data
  structure that it returns, please view the source of Stream.pm and
  look at the detailed description at the end of the file.


pkgId: 2b793c3479f5265a0801bc914e9ee8c4f3864fef0e0f9289bfa8cc84d799952b
name: perl-XML-Tidy
arch: src
version: 1.12.B55J2qn
epoch: 0
release: 13.fc23
summary: Tidy indenting of XML documents
url: http://search.cpan.org/dist/XML-Tidy
rpm_license: GPLv2
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-11.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-Tidy-1.12.B55J2qn-13.fc23.src.rpm
checksum_type: sha256
description:
  This module creates XML document objects (with inheritance from XML::XPath) to
  tidy mixed-content (ie. non-data) text node indenting. There are also some
  other handy member functions to compress && expand your XML document object
  (into either a compact XML representation or a binary one).


pkgId: 693cd3d11e611c2bafeed1a4deb1e1aa655539540c99bade393d5667a14ec8d6
name: perl-XML-TokeParser
arch: src
version: 0.05
epoch: 0
release: 18.fc23
summary: Simplified interface to XML::Parser
url: http://search.cpan.org/dist/XML-TokeParser/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder04.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-TokeParser-0.05-18.fc23.src.rpm
checksum_type: sha256
description:
  XML::TokeParser provides a procedural ("pull mode") interface to
  XML::Parser in much the same way that Gisle Aas' HTML::TokeParser provides
  a procedural interface to HTML::Parser. XML::TokeParser splits its XML
  input up into "tokens," each corresponding to an XML::Parser event.


pkgId: 8951a8e2d4508f41293d028cee32f97967c5b207e4df7daf5f21f6188a9f5def
name: perl-XML-TreeBuilder
arch: src
version: 5.4
epoch: 0
release: 4.fc23
summary: Parser that builds a tree of XML::Element objects
url: http://search.cpan.org/dist/XML-TreeBuilder/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-08.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-TreeBuilder-5.4-4.fc23.src.rpm
checksum_type: sha256
description:
  perl-XML-TreeBuilder is a Perl module that implements a parser
  that builds a tree of XML::Element objects.


pkgId: 83a98e66793b48d30cf71bf6fd3f331ebc826ddb59b2de88f1dc29577e35f34c
name: perl-XML-Twig
arch: src
version: 3.49
epoch: 0
release: 3.fc23
summary: Perl module for processing huge XML documents in tree mode
url: http://search.cpan.org/dist/XML-Twig/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-06.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-Twig-3.49-3.fc23.src.rpm
checksum_type: sha256
description:
  This module provides a way to process XML documents. It is build on
  top of XML::Parser.  XML::Twig offers a tree interface to the
  document, while allowing you to output the parts of it that have been
  completely processed.  It allows minimal resource (CPU and memory)
  usage by building the tree only for the parts of the documents that
  need actual processing, through the use of the twig_roots and
  twig_print_outside_roots options.


pkgId: ca59aeff631dea3286166884f8515b8b6376f394be223ccf775f66757dc95590
name: perl-XML-Validator-Schema
arch: src
version: 1.10
epoch: 0
release: 18.fc23
summary: Validate XML against a subset of W3C XML Schema
url: http://search.cpan.org/dist/XML-Validator-Schema/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder16.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-Validator-Schema-1.10-18.fc23.src.rpm
checksum_type: sha256
description:
  This module allows you to validate XML documents against a W3C XML Schema.
  This module does not implement the full W3C XML Schema recommendation
  (http://www.w3.org/XML/Schema), but a useful subset.


pkgId: 076bfe1a3cfd2017a125db313ba79679e08349085d879047b880acaa8c2f1a23
name: perl-XML-Writer
arch: src
version: 0.625
epoch: 0
release: 4.fc23
summary: A simple Perl module for writing XML documents
url: http://search.cpan.org/dist/XML-Writer/
rpm_license: CC0
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder18.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-Writer-0.625-4.fc23.src.rpm
checksum_type: sha256
description:
  XML::Writer is a simple Perl module for writing XML documents: it
  takes care of constructing markup and escaping data correctly, and by
  default, it also performs a significant amount of well-formedness
  checking on the output, to make certain (for example) that start and
  end tags match, that there is exactly one document element, and that
  there are not duplicate attribute names.


pkgId: d5acb3bf042de7d636dbfaa1c94a729bb30e608f7e4cc7c85383c3d5dcf9864b
name: perl-XML-Writer-String
arch: src
version: 0.1
epoch: 0
release: 7.fc23
summary: Capture output from XML::Writer module
url: http://search.cpan.org/dist/XML-Writer-String/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-24.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-Writer-String-0.1-7.fc23.src.rpm
checksum_type: sha256
description:
  This Perl module implements a bare-bones class specifically for the purpose
  of capturing data from the XML::Writer module.  XML::Writer expects an
  IO::Handle object and writes XML data to the specified object (or STDOUT)
  via its print() method.  This module simulates such an object for the
  specific purpose of providing the required print() method.


pkgId: cd5a0a7a7a726ecbb21a3f9631f33df391ac4a4c1307b67623a9e6b0a1ed441e
name: perl-XML-XPath
arch: src
version: 1.13
epoch: 0
release: 28.fc23
summary: XPath parser and evaluator for Perl
url: http://search.cpan.org/dist/XML-XPath/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder16.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-XPath-1.13-28.fc23.src.rpm
checksum_type: sha256
description:
  This module aims to comply exactly to the XPath specification at
  http://www.w3.org/TR/xpath and yet allow extensions to be added in the
  form of functions. Modules such as XSLT and XPointer may need to do
  this as they support functionality beyond XPath.


pkgId: 0e23cb68e1b603ea83cf77a2bd6ad20db3cc63887f3d2d630dfec5b035fc9434
name: perl-XML-XPathEngine
arch: src
version: 0.14
epoch: 0
release: 6.fc23
summary: Re-usable XPath engine for DOM-like trees
url: http://search.cpan.org/dist/XML-XPathEngine/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder04.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-XPathEngine-0.14-6.fc23.src.rpm
checksum_type: sha256
description:
  This module provides an XPath engine, that can be re-used by other
  module/classes that implement trees.


pkgId: 83c879338f2f293025677e2574115d4d998e97d341c406bd024276514cae46db
name: perl-XML-XQL
arch: src
version: 0.68
epoch: 0
release: 26.fc23
summary: Perl module for querying XML tree structures with XQL
url: http://search.cpan.org/dist/XML-XQL/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-06.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-XQL-0.68-26.fc23.src.rpm
checksum_type: sha256
description:
  This is a Perl extension that allows you to perform XQL queries on XML
  object trees. Currently only the XML::DOM module is supported, but
  other implementations, like XML::Grove, may soon follow.


pkgId: 9c2e9c2e68b36d02abe2d9617b19fb676760ced4bdbc91d0abf93e9624ab6bd2
name: perl-XML-Xerces
arch: src
version: 2.7.0_0
epoch: 0
release: 32.fc23
summary: Perl API to Xerces XML parser
url: http://xerces.apache.org/xerces-p/
rpm_license: ASL 2.0
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder21.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XML-Xerces-2.7.0_0-32.fc23.src.rpm
checksum_type: sha256
description:
  XML::Xerces is the Perl API to the Apache project's Xerces XML parser. It is
  implemented using the Xerces C++ API, and it provides access to most of the C++
  API from Perl.
  Because it is based on Xerces-C, XML::Xerces provides a validating XML parser
  that makes it easy to give your application the ability to read and write XML
  data. Classes are provided for parsing, generating, manipulating, and
  validating XML documents. XML::Xerces is faithful to the XML 1.0 recommendation
  and associated standards (DOM levels 1, 2, and 3, SAX 1 and 2, Namespaces, and
  W3C XML Schema). The parser provides high performance, modularity, and
  scalability, and provides full support for Unicode.
  XML::Xerces implements the vast majority of the Xerces-C API. The exception is
  some functions in the C++ API which either have better Perl counterparts (such
  as file I/O) or which manipulate internal C++ information that has no role in
  the Perl module.


pkgId: d67dbb68b6b62e5034fc8547831ee20a03063e91f0c49d8409f50de500c87f53
name: perl-XMLRPC-Lite
arch: src
version: 0.717
epoch: 0
release: 5.fc23
summary: Client and server implementation of XML-RPC protocol
url: http://search.cpan.org/dist/XMLRPC-Lite/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder10.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XMLRPC-Lite-0.717-5.fc23.src.rpm
checksum_type: sha256
description:
  XMLRPC::Lite is a Perl modules which provides a simple interface to the XML-
  RPC protocol both on client and server side. Based on SOAP::Lite module, it
  gives you access to all features and transports available in that module.


pkgId: 33283d699c35f7560f6ccedaa7b36acc3ba91457de70e0154cac62c994ad44e9
name: perl-XXX
arch: src
version: 0.29
epoch: 0
release: 3.fc23
summary: See Your Data in the Nude
url: http://search.cpan.org/dist/XXX/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder21.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-XXX-0.29-3.fc23.src.rpm
checksum_type: sha256
description:
  XXX.pm exports a function called XXX that you can put just about
  anywhere in your Perl code to make it die with a YAML dump of the
  arguments to its right.

  The charm of XXX-debugging is that it is easy to type and rarely
  requires parens and stands out visually so that you remember to remove
  it.

  XXX.pm also exports WWW, YYY and ZZZ which do similar debugging things.

  To use Data::Dumper instead of YAML:
     use XXX -dumper;


pkgId: c9fd2bbbaab62fca799f26efe734af13b1d21bf4676781acbdafc59d42b3d930
name: perl-YAML
arch: src
version: 1.15
epoch: 0
release: 4.fc23
summary: YAML Ain't Markup Language (tm)
url: http://search.cpan.org/dist/YAML/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-12.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-YAML-1.15-4.fc23.src.rpm
checksum_type: sha256
description:
  The YAML.pm module implements a YAML Loader and Dumper based on the
  YAML 1.0 specification. http://www.yaml.org/spec/
  YAML is a generic data serialization language that is optimized for
  human readability. It can be used to express the data structures of
  most modern programming languages, including Perl.
  For information on the YAML syntax, please refer to the YAML
  specification.


pkgId: 186f105fc8280c4480e61db99ec6771979c0e1a286331294392a919668950336
name: perl-YAML-LibYAML
arch: src
version: 0.59
epoch: 0
release: 3.fc23
summary: Perl YAML Serialization using XS and libyaml
url: http://search.cpan.org/dist/YAML-LibYAML/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder18.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-YAML-LibYAML-0.59-3.fc23.src.rpm
checksum_type: sha256
description:
  Kirill Siminov's "libyaml" is arguably the best YAML implementation. The C
  library is written precisely to the YAML 1.1 specification. It was originally
  bound to Python and was later bound to Ruby.


pkgId: 5b54758c80cfa4b3c780df5eec9f9d73d9ef1d27413e2f7eb2d91b01e2ac6365
name: perl-YAML-Parser-Syck
arch: src
version: 0.01
epoch: 0
release: 31.fc23
summary: Perl Wrapper for the YAML Parser Extension: libsyck
url: http://search.cpan.org/dist/YAML-Parser-Syck/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder00.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-YAML-Parser-Syck-0.01-31.fc23.src.rpm
checksum_type: sha256
description:
  libsyck is a *gift* from a gifted Stiff named 'Why'.

  YAML::Parser::Syck is an XS module that binds libsyck to Perl.


pkgId: 58b71a503247b022710b83f83c7db45a222b1482a5d68e532822ec98ef2698ca
name: perl-YAML-Syck
arch: src
version: 1.29
epoch: 0
release: 3.fc23
summary: Fast, lightweight YAML loader and dumper
url: http://search.cpan.org/dist/YAML-Syck/
rpm_license: BSD and MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder13.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-YAML-Syck-1.29-3.fc23.src.rpm
checksum_type: sha256
description:
  This module provides a Perl interface to the libsyck data serialization
  library. It exports the Dump and Load functions for converting Perl data
  structures to YAML strings, and the other way around.


pkgId: 2850d8b7b24d33a9d0dbe20bb745bbb45c5ba86bed167feab90a3cc09af81664
name: perl-YAML-Tiny
arch: src
version: 1.69
epoch: 0
release: 1.fc23
summary: Read/Write YAML files with as little code as possible
url: http://search.cpan.org/dist/YAML-Tiny/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-04.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-YAML-Tiny-1.69-1.fc23.src.rpm
checksum_type: sha256
description:
  YAML::Tiny is a Perl class for reading and writing YAML-style files,
  written with as little code as possible, reducing load time and
  memory overhead.


pkgId: 60e4973360b2b70f9d7979c494c851454aeee14ededc6a83aab4102907067702
name: perl-YAPE-Regex
arch: src
version: 4.00
epoch: 0
release: 13.fc23
summary: Yet Another Parser/Extractor for Regular Expressions
url: http://search.cpan.org/dist/YAPE-Regex/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-06.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-YAPE-Regex-4.00-13.fc23.src.rpm
checksum_type: sha256
description:
  This module is yet another parser and tree-builder for Perl regular
  expressions. It builds a tree out of a regex, but at the moment, the extent
  of the extraction tool for the tree is quite limited. However, the tree can be
  useful to extension modules.


pkgId: 41f66ca9fd6c215c0487e7d18b7fb0e7c50312d0cc37d0d112e164487b52a7b7
name: perl-YUM-RepoQuery
arch: src
version: 0.002
epoch: 0
release: 10.fc23
summary: Query a YUM repository for package information
url: http://search.cpan.org/dist/YUM-RepoQuery/
rpm_license: LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-11.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-YUM-RepoQuery-0.002-10.fc23.src.rpm
checksum_type: sha256
description:
  YUM::RepoQuery takes the URI to a package repository with YUM meta-data, and
  allows one to query what packages, and versions of those packages, are
  available in that repository.


pkgId: 42b50ba26f126c3828319ccd8b41f2ef8d893cd23f233822aad297cab6187300
name: perl-ZMQ-LibZMQ2
arch: src
version: 1.09
epoch: 0
release: 7.fc23
summary: Perl wrapper for the libzmq 2.x library
url: http://search.cpan.org/dist/ZMQ-LibZMQ2/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder20.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-ZMQ-LibZMQ2-1.09-7.fc23.src.rpm
checksum_type: sha256
description:
  The ZMQ::LibZMQ2 module is a wrapper of the 0MQ message passing library for
  Perl. It's a thin wrapper around the C API. Please read http://zeromq.org
  for more details on 0MQ.


pkgId: 039de7deac9a4657e93cd858891df4b1e6498a58f467371445f8f9c6b74cc0d4
name: perl-ZMQ-LibZMQ3
arch: src
version: 1.19
epoch: 0
release: 3.fc23
summary: Perl wrapper for the libzmq 3.x library
url: http://search.cpan.org/dist/ZMQ-LibZMQ3/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder04.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-ZMQ-LibZMQ3-1.19-3.fc23.src.rpm
checksum_type: sha256
description:
  The ZMQ::LibZMQ3 module is a wrapper of the 0MQ message passing library for
  Perl. It's a thin wrapper around the C API. Please read http://zeromq.org
  for more details on 0MQ.


pkgId: 8f2c1348774d6670ffe4329d10243927569477b828b6018dfb7fe25b3acb4bff
name: perl-ZeroMQ
arch: src
version: 0.23
epoch: 0
release: 11.fc23
summary: ZeroMQ2 wrapper for Perl
url: http://search.cpan.org/dist/ZeroMQ/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder19.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-ZeroMQ-0.23-11.fc23.src.rpm
checksum_type: sha256
description:
  The ZeroMQ module is a wrapper of the 0MQ message passing library for Perl.
  It's a thin wrapper around the C API. Please read http://zeromq.org for
  more details on ZeroMQ.


pkgId: fcb61068b000dfbf0e328937af89ea24edbc1162b92a876231e681d9ad297892
name: perl-aliased
arch: src
version: 0.34
epoch: 0
release: 3.fc23
summary: Use shorter versions of class names
url: http://search.cpan.org/dist/aliased/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm04-builder05.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-aliased-0.34-3.fc23.src.rpm
checksum_type: sha256
description:
  aliased is simple in concept but is a rather handy module. It loads the
  class you specify and exports into your namespace a subroutine that returns
  the class name. You can explicitly alias the class to another name or, if
  you prefer, you can do so implicitly. In the latter case, the name of the
  subroutine is the last part of the class name.


pkgId: 7e2b73166985a0a1fa8ccbbd5eb4a219bfdcb61e249ab9ca9cb1df5649eb50bc
name: perl-asa
arch: src
version: 1.03
epoch: 0
release: 12.fc23
summary: Lets your class/object say it works like something else
url: http://search.cpan.org/dist/asa
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder12.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-asa-1.03-12.fc23.src.rpm
checksum_type: sha256
description:
  Perl 5 doesn't natively support Java-style interfaces, and it doesn't
  support Perl 6 style roles either.

  You can get both of these things in half a dozen different ways via various
  CPAN modules, but they usually require that you buy into "their way" of
  implementing your code.

  This package overrides the isa() method, allowing your class to claim it's a
  class it's not (that is, isn't in @ISA).


pkgId: f125985ab4d09cf8db37ac0a8a7fc8d349a4c4aeb042692c9ad6146c219fb542
name: perl-autobox
arch: src
version: 2.83
epoch: 0
release: 3.fc23
summary: Call methods on native types
url: http://search.cpan.org/dist/autobox/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder12.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-autobox-2.83-3.fc23.src.rpm
checksum_type: sha256
description:
  The autobox pragma allows methods to be called on integers, floats,
  strings, arrays, hashes, and code references in exactly the same manner as
  blessed references.


pkgId: 379dcb9b5e90dbf3909b2437d8267f079882b86f9eed763dd5843b26262dbf07
name: perl-autobox-Junctions
arch: src
version: 0.001
epoch: 0
release: 5.fc23
summary: Autoboxified junction-style operators
url: http://search.cpan.org/dist/autobox-Junctions/
rpm_license: LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-08.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-autobox-Junctions-0.001-5.fc23.src.rpm
checksum_type: sha256
description:
  This is a simple autoboxifying wrapper around Syntax::Keyword::Junction Perl
  module, that provides array and array references with the functions provided
  by that package as methods for arrays: any, all, one, and none.


pkgId: e81613e3686d889f1d12035335d3e8bd07267016858c8e19315a6661f24fcb96
name: perl-autobox-dump
arch: src
version: 20090426.1746
epoch: 0
release: 11.fc23
summary: Human/perl readable strings from the results of an EXPR
url: http://search.cpan.org/dist/autobox-dump/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-02.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-autobox-dump-20090426.1746-11.fc23.src.rpm
checksum_type: sha256
description:
  The autobox::dump pragma adds, via the autobox pragma, a method to normal
  expression (such as scalars, arrays, hashes, math, literals, etc.) that
  produces a human/perl readable representation of the value of that expression.


pkgId: 70b746066572118ad52bf4364eabedaf71933786923860a18be9de4b9575e23a
name: perl-autodie
arch: src
version: 2.29
epoch: 0
release: 1.fc23
summary: Replace functions with ones that succeed or die
url: http://search.cpan.org/dist/autodie/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder04.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-autodie-2.29-1.fc23.src.rpm
checksum_type: sha256
description:
  The "autodie" and "Fatal" pragma provides a convenient way to replace
  functions that normally return false on failure with equivalents that throw an
  exception on failure.

  However "Fatal" has been obsoleted by the new autodie pragma. Please use
  autodie in preference to "Fatal".


pkgId: 73c7f7f25a64a8d15a4b93f88f9b5cca8a2e1ca5236ba21ba8d9d6e2cc8652b8
name: perl-autovivification
arch: src
version: 0.16
epoch: 0
release: 1.fc23
summary: Lexically disable autovivification
url: http://search.cpan.org/dist/autovivification/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder02.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-autovivification-0.16-1.fc23.src.rpm
checksum_type: sha256
description:
  When an undefined variable is dereferenced, it gets silently upgraded to an
  array or hash reference (depending of the type of the dereferencing). This
  behavior is called autovivification and usually does what you mean (e.g.
  when you store a value) but it's sometimes unnatural or surprising because
  your variables gets populated behind your back. This is especially true
  when several levels of dereferencing are involved, in which case all levels
  are vivified up to the last, or when it happens in intuitively read-only
  constructs like exists.


pkgId: 1dcc07778be640ff739be4eec5153014b66cf85dd546064b36f5e726eff55e41
name: perl-bareword-filehandles
arch: src
version: 0.003
epoch: 0
release: 12.fc23
summary: Disables bareword filehandles
url: http://search.cpan.org/dist/bareword-filehandles/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder03.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-bareword-filehandles-0.003-12.fc23.src.rpm
checksum_type: sha256
description:
  This module lexically disables the use of bareword filehandles with built-in
  functions, except for the special built-in filehandles STDIN, STDOUT,
  STDERR, ARGV, ARGVOUT and DATA.


pkgId: fb562bf26666328d9abfc881cd599334899444f5a02f0ace8777e6c36db87d50
name: perl-ccom
arch: src
version: 1.4.1
epoch: 0
release: 21.fc23
summary: Perl module for context-sensitive phonetic string replacement
url: http://www.heise.de/ct/ftp/99/25/252/
rpm_license: LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder03.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-ccom-1.4.1-21.fc23.src.rpm
checksum_type: sha256
description:
  A perl module for context-sensitive phonetic string replacement to modify
  strings according to predefined replacement rules in such a way that words
  with the same pronunciation (e.g. "tail" and "tale") are converted to the
  same string. This can, for example, be used to implement error-tolerant
  search routines in address databases. It contains phonetic rules for German
  only, but the software has been prepared for multi-language support.


pkgId: fb88b6919a79555544b71336f897e2055ff3e223f68cd1d2fd123e9c1e986dd8
name: perl-common-sense
arch: src
version: 3.7.4
epoch: 0
release: 1.fc23
summary: "Common sense" Perl defaults
url: http://search.cpan.org/dist/common-sense
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder03.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-common-sense-3.7.4-1.fc23.src.rpm
checksum_type: sha256
description:
  This module implements some sane defaults for Perl programs, as defined
  by two typical (or not so typical - use your common sense) specimens of
  Perl coders:

  It's supposed to be mostly the same, with much lower memory usage, as:

  	use utf8;
  	use strict qw(vars subs);
  	use feature qw(say state switch);
  	use feature qw(unicode_strings unicode_eval current_sub fc evalbytes);
  	no feature qw(array_base);
  	no warnings;
  	use warnings qw(FATAL closed threads internal debugging pack
  			portable prototype inplace io pipe unpack malloc
  			deprecated glob digit printf layer
  			reserved taint closure semicolon);
  	no warnings qw(exec newline unopened);


pkgId: edd270c2ae369630f14987f7b2787869089c97d6669e943f5f00ba1fe08e0870
name: perl-constant
arch: src
version: 1.33
epoch: 0
release: 347.fc23
summary: Perl pragma to declare constants
url: http://search.cpan.org/dist/constant/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder06.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-constant-1.33-347.fc23.src.rpm
checksum_type: sha256
description:
  This pragma allows you to declare constants at compile-time:

  use constant PI => 4 * atan2(1, 1);

  When you declare a constant such as "PI" using the method shown above,
  each machine your script runs upon can have as many digits of accuracy
  as it can use. Also, your program will be easier to read, more likely
  to be maintained (and maintained correctly), and far less likely to
  send a space probe to the wrong planet because nobody noticed the one
  equation in which you wrote 3.14195.

  When a constant is used in an expression, Perl replaces it with its
  value at compile time, and may then optimize the expression further.
  In particular, any code in an "if (CONSTANT)" block will be optimized
  away if the constant is false.


pkgId: c297465a377cdb0d2cd2e85d31d082ead8686bf087956a60782ded86a5d02d39
name: perl-constant-boolean
arch: src
version: 0.02
epoch: 0
release: 15.fc23
summary: Define TRUE and FALSE constants
url: http://search.cpan.org/dist/constant-boolean/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-14.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-constant-boolean-0.02-15.fc23.src.rpm
checksum_type: sha256
description:
  Defines TRUE and FALSE constants in caller's namespace. You could use
  simple values like empty string or zero for false, or any non-empty and non-
  zero string value as true, but the TRUE and FALSE constants are more
  descriptive.


pkgId: 2fce3a77028845457e8ded90429f45f4ab707e1089b3374f74f59a88724d8a7d
name: perl-constant-defer
arch: src
version: 6
epoch: 0
release: 3.fc23
summary: Constant subs with deferred value calculation
url: http://search.cpan.org/dist/constant-defer/
rpm_license: GPLv3+
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder06.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-constant-defer-6-3.fc23.src.rpm
checksum_type: sha256
description:
  constant::defer creates a subroutine which on the first call runs given
  code to calculate its value, and on the second and subsequent calls just
  returns that value, like a constant. The value code is discarded once run,
  allowing it to be garbage collected.


pkgId: ead1b2be50454c4ac9de388d7e6069ecb393ecd9eae4ff7ddc34299ee540b044
name: perl-constant-tiny
arch: src
version: 1.02
epoch: 0
release: 1.fc23
summary: Perl pragma to declare constants
url: http://search.cpan.org/dist/constant-tiny/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-19.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-constant-tiny-1.02-1.fc23.src.rpm
checksum_type: sha256
description:
  This module is a lightweight version of Perl standard constant.pm. Here are
  the keys differences: it doesn't support Unicode names, it has stricter rules
  about valid names.


pkgId: ffd622e6d4a1c63fde58d14a89c7a130eab715066bde4bc2d337622cfc17acca
name: perl-criticism
arch: src
version: 1.02
epoch: 0
release: 12.fc23
summary: Perl pragma to enforce coding standards and best-practices
url: http://search.cpan.org/dist/criticism/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-04.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-criticism-1.02-12.fc23.src.rpm
checksum_type: sha256
description:
  This pragma enforces coding standards and promotes best-practices by
  running your file through Perl::Critic before every execution. In a
  production system, this usually isn't feasible because it adds a lot of
  overhead at start-up. If you have a separate development environment, you
  can effectively bypass the criticism pragma by not installing Perl::Critic
  in the production environment. If Perl::Critic can't be loaded, then
  criticism just fails silently.


pkgId: 67dd62cc64f8ed7baa4015dc569ef6175ac31423af2261113c90d7816f654fa9
name: perl-enum
arch: src
version: 1.10
epoch: 0
release: 3.fc23
summary: C-style enumerated types and bitmask flags in Perl
url: http://search.cpan.org/dist/enum/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-11.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-enum-1.10-3.fc23.src.rpm
checksum_type: sha256
description:
  This module is used to define a set of constants with ordered numeric
  values, similar to the enum type in the C programming language.
  You can also define bitmask constants, where the value assigned to
  each constant has exactly one bit set (e.g. 1, 2, 4, 8, etc).


pkgId: 827d030701d6821a8cc999eaa4e81b33fc30c6e27fca2ba2e6f513e9b2805f20
name: perl-eperl
arch: src
version: 2.2.14
epoch: 0
release: 31.fc23
summary: Embedded Perl Language
url: http://www.ossp.org/pkg/tool/eperl/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder05.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-eperl-2.2.14-31.fc23.src.rpm
checksum_type: sha256
description:
  ePerl interprets an ASCII file bristled with Perl 5 program statements
  by evaluating the Perl 5 code while passing through the plain ASCII
  data. It can operate in various ways: As a stand-alone Unix filter or
  integrated Perl 5 module for general file generation tasks and as a
  powerful Webserver scripting language for dynamic HTML page
  programming.

  The documentation and latest release can be found on
  http://www.ossp.org/pkg/tool/eperl/

  Note that this package does not include the Apache::ePerl module,
  which is designed for mod_perl 1.x.


pkgId: e1772fef699e7e29ef6d3b14edb91ab5221a20eaa1f7279fbcd98847a88bc1c3
name: perl-forks
arch: src
version: 0.34
epoch: 0
release: 15.fc23
summary: A drop-in replacement for Perl threads using fork()
url: http://search.cpan.org/~rybskej/perl-forks-0.34/
rpm_license: (GPL+ or Artistic) and (GPLv2+ or Artistic)
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder00.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-forks-0.34-15.fc23.src.rpm
checksum_type: sha256
description:
  The forks.pm module is a drop-in replacement for threads.pm.  It has the
  same syntax as the threads.pm module (it even takes over its namespace) but
  has some significant differences:

  - you do _not_ need a special (threaded) version of Perl
  - it is _much_ more economic with memory usage on OS's that support COW
  - it is more efficient in the startup of threads
  - it is slightly less efficient in the stopping of threads
  - it is less efficient in inter-thread communication

  If for nothing else, it allows you to use the Perl threading model in
  non-threaded Perl builds and in older versions of Perl (5.6.0 and
  higher are supported).


pkgId: 23dd27b9aa2a264f29db51bf269708aa804ae3c12d1a3b699eadf0a9cd356c27
name: perl-generators
arch: src
version: 1.04
epoch: 0
release: 1.fc23
summary: RPM Perl dependencies generators
url: http://jplesnik.fedorapeople.org/generators
rpm_license: GPL+
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-07.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-generators-1.04-1.fc23.src.rpm
checksum_type: sha256
description:
  This package provides RPM Perl dependencies generators which are used for
  getting provides and requires from Perl binaries and modules.


pkgId: 7f381ac8a539246d6063d0cc01fc38ca55d6f6d0e482d84534e9333591afc9e0
name: perl-gettext
arch: src
version: 1.06
epoch: 0
release: 1.fc23
summary: Interface to gettext family of functions
url: http://search.cpan.org/dist/gettext/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder18.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-gettext-1.06-1.fc23.src.rpm
checksum_type: sha256
description:
  The gettext module permits access from perl to the gettext() family of
  functions for retrieving message strings from databases constructed to
  internationalize software.


pkgId: f9d99adf50e2f68be67f929d1edb8a6cd154be2ae294a0ed0614f8c5111808c8
name: perl-inc-latest
arch: src
version: 0.500
epoch: 2
release: 3.fc23
summary: Use modules bundled in inc/ if they are newer than installed ones
url: http://search.cpan.org/dist/inc-latest/
rpm_license: ASL 2.0
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder05.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-inc-latest-0.500-3.fc23.src.rpm
checksum_type: sha256
description:
  The inc::latest module helps bootstrap configure-time dependencies for CPAN
  distributions. These dependencies get bundled into the inc directory within
  a distribution and are used by Makefile.PL or Build.PL.


pkgId: c67cb4d1a90bf4fd3739d92ec69bcfc19f43a15623d98583e6c6e1590f9a393d
name: perl-indirect
arch: src
version: 0.36
epoch: 0
release: 1.fc23
summary: Lexically warn about using the indirect object syntax
url: http://search.cpan.org/dist/indirect/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder02.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-indirect-0.36-1.fc23.src.rpm
checksum_type: sha256
description:
  When enabled (or disabled as some may prefer to say, since you actually
  turn it on by calling no indirect), this pragma warns about indirect object
  syntax constructs that may have slipped into your code.


pkgId: 9697b7032a9f9059704968141d4ecb14fe9c2fd972f578d4678157a5ebc9b0a8
name: perl-latest
arch: src
version: 0.03
epoch: 0
release: 16.fc23
summary: Use the latest Perl features
url: http://search.cpan.org/dist/latest/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-17.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-latest-0.03-16.fc23.src.rpm
checksum_type: sha256
description:
  Shake out any obscure problems that might result from your code being used by a
  program that requires the latest Perl version.


pkgId: 742fcee7789f54f8e1952110a63fc5ee0525e6e4f13b5f4311d6b5dc7da9bbb3
name: perl-lib-abs
arch: src
version: 0.93
epoch: 0
release: 5.fc23
summary: Module lib that makes relative path absolute to caller
url: http://search.cpan.org/dist/lib-abs/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder16.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-lib-abs-0.93-5.fc23.src.rpm
checksum_type: sha256
description:
  The main reason of this library is to transform relative paths to absolute
  at the BEGIN stage, and push transformed to @INC. Relative path basis is
  not the current working directory, but the location of file, where the
  statement is (caller file). When using common lib, relative paths stays
  relative to current working directory.


pkgId: a8c5bc1bc751df647ac65a7b43210da80cb1711dd8656c627bd9fac36e9c8559
name: perl-libintl
arch: src
version: 1.20
epoch: 0
release: 18.fc23
summary: Internationalization library for Perl, compatible with gettext
url: http://search.cpan.org/dist/libintl-perl/
rpm_license: LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder11.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-libintl-1.20-18.fc23.src.rpm
checksum_type: sha256
description:
  The package libintl-perl is an internationalization library for Perl that
  aims to be compatible with the Uniforum message translations system as
  implemented for example in GNU gettext.


pkgId: 22c199215ace644f18d0c20023b1249ad4521e96deb95087ec5259cdd503b743
name: perl-libnet
arch: src
version: 3.07
epoch: 0
release: 1.fc23
summary: Perl clients for various network protocols
url: http://search.cpan.org/dist/libnet/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-08.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-libnet-3.07-1.fc23.src.rpm
checksum_type: sha256
description:
  This is a collection of Perl modules which provides a simple and
  consistent programming interface (API) to the client side of various
  protocols used in the internet community.


pkgId: dad25ad00c91cb3b6f71855ba5b9e83cc94263f41298eac80a6227c1cf3671a3
name: perl-libwhisker2
arch: src
version: 2.5
epoch: 0
release: 14.fc23
summary: Perl module geared specifically for HTTP testing
url: http://www.wiretrip.net/rfp/lw.asp
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-04.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-libwhisker2-2.5-14.fc23.src.rpm
checksum_type: sha256
description:
  Libwhisker is a Perl library useful for HTTP testing scripts.  It
  contains a pure-Perl implementation of functionality found in the LWP,
  URI, Digest::MD5, Digest::MD4, Data::Dumper, Authen::NTLM, HTML::Parser,
  HTML::FormParser, CGI::Upload, MIME::Base64, and GetOpt::Std modules.
  Libwhisker is designed to be portable (a single perl file), fast (general
  benchmarks show libwhisker is faster than LWP), and flexible (great care
  was taken to ensure the library does exactly what you want to do, even
  if it means breaking the protocol).


pkgId: 0835d61bf9c27971952a2d2488dfc8fffbc8c7504d5f48388189f3fc652ca0d7
name: perl-libwww-perl
arch: src
version: 6.13
epoch: 0
release: 3.fc23
summary: A Perl interface to the World-Wide Web
url: http://search.cpan.org/dist/libwww-perl/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-04.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-libwww-perl-6.13-3.fc23.src.rpm
checksum_type: sha256
description:
  The libwww-perl collection is a set of Perl modules which provides a simple and
  consistent application programming interface to the World-Wide Web.  The main
  focus of the library is to provide classes and functions that allow you to
  write WWW clients. The library also contain modules that are of more general
  use and even classes that help you implement simple HTTP servers.


pkgId: 0b016869176bc2f9f3b03e7eb03bbb3e4f38af0284dd0b106abddb91856e464b
name: perl-libxml-perl
arch: src
version: 0.08
epoch: 0
release: 25.fc23
summary: A collection of Perl modules for working with XML
url: http://search.cpan.org/dist/libxml-perl/
rpm_license: (GPL+ or Artistic) and Public Domain
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder13.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-libxml-perl-0.08-25.fc23.src.rpm
checksum_type: sha256
description:
  libxml-perl is a collection of smaller Perl modules, scripts, and
  documents for working with XML in Perl.  libxml-perl software works in
  combination with XML::Parser, PerlSAX, XML::DOM, XML::Grove and
  others.


pkgId: c3ddb63eb3fbf3351a6b573b6bea1684bd552c01284786fba28463a981c0c70c
name: perl-local-lib
arch: src
version: 2.000017
epoch: 0
release: 1.fc23
summary: Create and use a local lib/ for perl modules
url: http://search.cpan.org/dist/local-lib
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-10.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-local-lib-2.000017-1.fc23.src.rpm
checksum_type: sha256
description:
  This module provides a quick, convenient way of bootstrapping a user-
  local Perl module library located within the user's home directory. It
  also constructs and prints out for the user the list of environment
  variables using the syntax appropriate for the user's current shell (as
  specified by the 'SHELL' environment variable), suitable for directly
  adding to one's shell configuration file.

  More generally, local::lib allows for the bootstrapping and usage of a
  directory containing Perl modules outside of Perl's '@INC'. This makes
  it easier to ship an application with an app-specific copy of a Perl module,
  or collection of modules. Useful in cases like when an upstream maintainer
  hasn't applied a patch to a module of theirs that you need for your
  application.


pkgId: cd534efa89c7d7657c01d36e805abf286df876182d3d79fa46db1027f77ed4d9
name: perl-mime-construct
arch: src
version: 1.11
epoch: 0
release: 15.fc23
summary: Construct/send MIME messages from the command line
url: http://search.cpan.org/~rosch/mime-construct-1.11
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-11.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-mime-construct-1.11-15.fc23.src.rpm
checksum_type: sha256
description:
  mime-construct constructs and (by default) mails MIME messages.
  It is entirely driven from the command line, it is designed to be used
  by other programs, or people who act like programs.


pkgId: 2151b3ecad78a5e2ee73a2056011836c34d795e0ce98f9a3a3a4ac7d6c634493
name: perl-mixin
arch: src
version: 0.07
epoch: 0
release: 3.fc23
summary: Mixin inheritance, an alternative to multiple inheritance
url: http://search.cpan.org/dist/mixin/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm02-builder04.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-mixin-0.07-3.fc23.src.rpm
checksum_type: sha256
description:
  Mixin inheritance is an alternative to the usual multiple-inheritance and
  solves the problem of knowing which parent will be called. It also solves a
  number of tricky problems like diamond inheritance.


pkgId: 9bc2ba0950564b65e13daa00c4d24c66c49c72ad12d2bcaf986a6280f38b1b30
name: perl-multidimensional
arch: src
version: 0.011
epoch: 0
release: 8.fc23
summary: Disables multidimensional array emulation
url: http://search.cpan.org/dist/multidimensional/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder10.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-multidimensional-0.011-8.fc23.src.rpm
checksum_type: sha256
description:
  Perl's multidimensional array emulation stems from the days before the language
  had references, but these days it mostly serves to bite you when you typo a
  hash slice by using the $ sigil instead of @.

  This module lexically makes using multidimensional array emulation a fatal error
  at compile time.


pkgId: f63a94adcabdfad1d17e39e277394cf988b08a15f3048c2efe4b8c00a00ccebd
name: perl-namespace-autoclean
arch: src
version: 0.27
epoch: 0
release: 1.fc23
summary: Keep imports out of your namespace
url: http://search.cpan.org/dist/namespace-autoclean
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-09.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-namespace-autoclean-0.27-1.fc23.src.rpm
checksum_type: sha256
description:
  When you import a function into a Perl package, it will naturally also be
  available as a method. The 'namespace::autoclean' pragma will remove all
  imported symbols at the end of the current package's compile cycle. Functions
  called in the package itself will still be bound by their name, but they won't
  show up as methods on your class or instances. This module is very similar to
  namespace::clean, except it will clean all imported functions, no matter if you
  imported them before or after you 'use'd the pragma. It will also not touch
  anything that looks like a method.


pkgId: e138d6584ae11219e4568bd246d71ff0e62492147022def3edb6dc22deb8067a
name: perl-namespace-clean
arch: src
version: 0.25
epoch: 0
release: 5.fc23
summary: Keep your namespace tidy
url: http://search.cpan.org/dist/namespace-clean/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm02-builder21.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-namespace-clean-0.25-5.fc23.src.rpm
checksum_type: sha256
description:
  When you define a function, or import one, into a Perl package, it will
  naturally also be available as a method. This does not per se cause
  problems, but it can complicate subclassing and, for example, plugin
  classes that are included via multiple inheritance by loading them as
  base classes.

  The 'namespace::clean' pragma will remove all previously declared or
  imported symbols at the end of the current package's compile cycle.
  Functions called in the package itself will still be bound by their
  name, but they won't show up as methods on your class or instances.


pkgId: 49355b46a1f1ab09fafa37c04c09e59e74e08ce8562b83a682c1df1c17803788
name: perl-parent
arch: src
version: 0.234
epoch: 1
release: 3.fc23
summary: Establish an ISA relationship with base classes at compile time
url: http://search.cpan.org/dist/parent/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder15.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-parent-0.234-3.fc23.src.rpm
checksum_type: sha256
description:
  Allows you to both load one or more modules, while setting up inheritance
  from those modules at the same time. Mostly similar in effect to:

  	package Baz;

  	BEGIN {
  		require Foo;
  		require Bar;

  		push @ISA, qw(Foo Bar);
  	}


pkgId: 3683026ae44e6f4ca769d905a48ea2226836c0e2d785bc3d0e6d55448ee5aa5a
name: perl-perl5i
arch: src
version: 2.13.1
epoch: 0
release: 3.fc23
summary: Fix as much of Perl 5 as possible in one pragma
url: https://metacpan.org/release/perl5i
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder16.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-perl5i-2.13.1-3.fc23.src.rpm
checksum_type: sha256
description:
  Perl 5 has a lot of warts. There's a lot of individual modules and techniques
  out there to fix those warts. perl5i aims to pull the best of them together
  into one module so you can turn them on all at once.

  This includes adding features, changing existing core functions and changing
  defaults. It will likely not be 100% backwards compatible with Perl 5, though
  it will be 99%, perl5i will try to have a lexical effect.

  Please add to this imaginary world and help make it real, either by telling
  me what Perl looks like in your imagination
  (http://github.com/schwern/perl5i/issues) or make a fork (forking on github is
  like a branch you control) and implement it yourself.


pkgId: a7374079bec209f8d3121d6f224ff0a35da190933834ae3057e61207762cebc0
name: perl-perlfaq
arch: src
version: 5.021010
epoch: 0
release: 1.fc23
summary: Frequently asked questions about Perl
url: http://search.cpan.org/dist/perlfaq/
rpm_license: (GPL+ or Artistic) and Public Domain
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder08.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-perlfaq-5.021010-1.fc23.src.rpm
checksum_type: sha256
description:
  The perlfaq comprises several documents that answer the most commonly asked
  questions about Perl and Perl programming.


pkgId: e0f31e51ebdd497fc70eb62e99166a0375a7f5401464d365e63fe7b818ccdaa4
name: perl-perlindex
arch: src
version: 1.606
epoch: 0
release: 5.fc23
summary: Index and search the perl documentation
url: http://search.cpan.org/dist/perlindex/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder04.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-perlindex-1.606-5.fc23.src.rpm
checksum_type: sha256
description:
  Perlindex is a program to index and search the perl documentation. It provides
  Text::English module implementing Porter stemming algorithm.


pkgId: 71b03a4469a2db07fae2f7de45604eb1fcadbfcd8f229b3dee7a0e285da8fa04
name: perl-pgsql_perl5
arch: src
version: 1.9.0
epoch: 0
release: 23.fc23
summary: Pg - Perl5 extension for PostgreSQL
url: http://search.cpan.org/dist/pgsql_perl5/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder20.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-pgsql_perl5-1.9.0-23.fc23.src.rpm
checksum_type: sha256
description:
  The Pg module permits you to access all functions of the Libpq interface
  of PostgreSQL. Libpq is the programmer's interface to PostgreSQL.
  For examples of how to use this module, look at the file test.pl.


pkgId: 3614bd1e30a24953cc6839cf11c9a2f6318989c288ee524ae0d9e5e54b227c56
name: perl-pip
arch: src
version: 1.19
epoch: 0
release: 13.fc23
summary: Perl Installation Program, for scripted and distribution installation
url: http://search.cpan.org/dist/pip/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-11.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-pip-1.19-13.fc23.src.rpm
checksum_type: sha256
description:
  The pip ("Perl Installation Program") console application is used to
  install Perl distributions in a wide variety of formats, both from CPAN and
  from external third-party locations, while supporting module dependencies
  that go across the boundary from third-party to CPAN.


pkgId: e90491ceef15c89941e94f0d4213b9ecb973ea3f59d173ae91e411035637f378
name: perl-pmtools
arch: src
version: 2.0.0
epoch: 0
release: 4.fc23
summary: A suite of small programs to help manage Perl modules
url: http://search.cpan.org/dist/pmtools/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-19.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-pmtools-2.0.0-4.fc23.src.rpm
checksum_type: sha256
description:
  This is pmtools -- a suite of small programs to help manage modules.
  The names are totally preliminary, and in fact, so is the code.  We follow
  the "keep it small" notion of many tiny tools each doing one thing well,
  eschewing giant megatools with millions of options.

  Tom Christiansen


pkgId: a9563fb68a51614a4cd91fc179e3461736066d6bfa66c872ed982522c631729c
name: perl-podlators
arch: src
version: 2.5.3
epoch: 0
release: 347.fc23
summary: Format POD source into various output formats
url: http://search.cpan.org/dist/podlators/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder06.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-podlators-2.5.3-347.fc23.src.rpm
checksum_type: sha256
description:
  This package contains Pod::Man and Pod::Text modules which convert POD input
  to *roff source output, suitable for man pages, or plain text.  It also
  includes several sub-classes of Pod::Text for formatted output to terminals
  with various capabilities.


pkgId: 6ae1ce7e3271491f9c629f5700c22fd4ddaeb630460869c6bc324ede7dd8e5f6
name: perl-podlinkcheck
arch: src
version: 12
epoch: 0
release: 8.fc23
summary: Check Perl POD L<> link references
url: http://search.cpan.org/dist/podlinkcheck/
rpm_license: GPLv3+
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder12.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-podlinkcheck-12-8.fc23.src.rpm
checksum_type: sha256
description:
  PodLinkCheck parses Perl POD from a script, module or documentation
  and checks that L<> links within it refer to a known program, module,
  or man page.


pkgId: a5f2c3aab0ceacbcee8d90a21862548f1f68f47e77844a5519386e5e2d68f553
name: perl-prefork
arch: src
version: 1.04
epoch: 0
release: 17.fc23
summary: Optimized module loading for forking or non-forking processes
url: http://search.cpan.org/dist/prefork/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder03.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-prefork-1.04-17.fc23.src.rpm
checksum_type: sha256
description:
  Optimized module loading for forking or non-forking processes

  prefork.pm is intended to serve as a central and optional marshalling
  point for state detection (are we running in compile-time or run-time
  mode) and to act as a relatively light-weight module loader.


pkgId: 79b06f9476398ee1ee6c26d1b67abbd9e66b194ed36b2f81f9ebb412fc40097c
name: perl-qooxdoo-compat
arch: src
version: 0.7.3
epoch: 0
release: 21.fc23
summary: Perl backend for Qooxdoo
url: http://qooxdoo.org/
rpm_license: LGPLv2 or EPL
rpm_vendor: Fedora Project
rpm_group: Development/Languages
rpm_buildhost: buildhw-08.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-qooxdoo-compat-0.7.3-21.fc23.src.rpm
checksum_type: sha256
description:
  This package provides the Perl backend for Qooxdoo, a comprehensive
  and innovative Ajax application framework. This package supports
  Qooxdoo 0.7.


pkgId: 497ffa871b77b8d4320df3338a5312c93a28958f2bad2f8522006484f4ec0ee4
name: perl-re-engine-PCRE
arch: src
version: 0.17
epoch: 0
release: 9.fc23
summary: Perl-compatible regular expression engine
url: http://search.cpan.org/dist/re-engine-PCRE/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder19.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-re-engine-PCRE-0.17-9.fc23.src.rpm
checksum_type: sha256
description:
  This allows to replace perl's regular expression engine in a given lexical
  scope with PCRE regular expressions provided by pcre library.


pkgId: a4f4b5b6e28215ad2c492d452e69d3f3bc6120eae5e88c93f004c29130f436d9
name: perl-rpm-build-perl
arch: src
version: 0.82
epoch: 0
release: 12.fc23
summary: Perl compiler back-end to extract Perl dependencies
url: http://search.cpan.org/dist/rpm-build-perl
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder11.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-rpm-build-perl-0.82-12.fc23.src.rpm
checksum_type: sha256
description:
  B::PerlReq is a back-end module for the Perl compiler that extracts
  dependencies from Perl source code, based on the internal compiled
  structure that Perl itself creates after parsing a program. The output of
  B::PerlReq is suitable for automatic dependency tracking (e.g. for RPM
  packaging).


pkgId: 062fc20a75732037a4be770ab82e604bf78f209918dd2c1f7166712151e2ad63
name: perl-smartmatch
arch: src
version: 0.05
epoch: 0
release: 3.fc23
summary: Pluggable smart matching back-ends
url: http://search.cpan.org/dist/smartmatch/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder06.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-smartmatch-0.05-3.fc23.src.rpm
checksum_type: sha256
description:
  This module allows you to override the behavior of the smart match operator
  ("~~"). "use smartmatch $matcher" hooks into the compiler to replace the
  smartmatch opcode with a call to a custom subroutine, specified either as
  a coderef or as a string, which will have "smartmatch::engine::" prepended to
  it and used as the name of a package in which to find a subroutine named
  "match".  The subroutine will be called with two arguments, the values on the
  left and right sides of the smart match operator, and should return the
  result.


pkgId: 0825f4cdc00137057e9ee363df0a27240de16a672e8a4a8dcc9cc0d18c132a4c
name: perl-srpm-macros
arch: src
version: 1
epoch: 0
release: 17.fc23
summary: RPM macros for building Perl source package from source repository
rpm_license: GPLv3+
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder21.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-srpm-macros-1-17.fc23.src.rpm
checksum_type: sha256
description:
  These RPM macros are used for building Perl source packages from source
  repositories. They influence build-requires set into the source package.


pkgId: 2438404a34657e4655b5cf31be80735747fac8f099df694d33d45c3879bdbe96
name: perl-syntax
arch: src
version: 0.004
epoch: 0
release: 10.fc23
summary: Activate syntax extensions
url: http://search.cpan.org/dist/syntax/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-03.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-syntax-0.004-10.fc23.src.rpm
checksum_type: sha256
description:
  This module activates community provided syntax extensions to Perl. You
  pass it a feature name, and optionally a scalar with arguments, and the
  dispatching system will load and install the extension in your package.


pkgId: 249a15ea312c9db76a50e81c7608a68047416255da20a5b44d4e1d078ff09150
name: perl-threads
arch: src
version: 2.02
epoch: 1
release: 2.fc23
summary: Perl interpreter-based threads
url: http://search.cpan.org/dist/threads/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder11.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-threads-2.02-2.fc23.src.rpm
checksum_type: sha256
description:
  Since Perl 5.8, thread programming has been available using a model called
  interpreter threads which provides a new Perl interpreter for each thread,
  and, by default, results in no data or state information being shared
  between threads.

  (Prior to Perl 5.8, 5005threads was available through the "Thread.pm" API.
  This threading model has been deprecated, and was removed as of Perl 5.10.0.)


pkgId: ab20a7868046b1919f6f7224edca91c498d24d02f3ed1e9723b614c38a489596
name: perl-threads-lite
arch: src
version: 0.034
epoch: 0
release: 4.fc23
summary: Actor model threading for Perl
url: http://search.cpan.org/dist/threads-lite/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder03.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-threads-lite-0.034-4.fc23.src.rpm
checksum_type: sha256
description:
  This module implements threads for perl. One crucial difference with
  threads.pm threads is that the threads are disconnected, except by message
  queues. It thus facilitates a message passing style of multi-threading.


pkgId: 230a80bd7d0c60d738d94fab5a16c540dfac932c020074f268b1483fed8c2d1d
name: perl-threads-shared
arch: src
version: 1.48
epoch: 0
release: 346.fc23
summary: Perl extension for sharing data structures between threads
url: http://search.cpan.org/dist/threads-shared/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder22.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-threads-shared-1.48-346.fc23.src.rpm
checksum_type: sha256
description:
  By default, variables are private to each thread, and each newly created
  thread gets a private copy of each existing variable. This module allows
  you to share variables across different threads (and pseudo-forks on
  Win32). It is used together with the threads module.


pkgId: 917234b2ff8233d4f573b0c860a3f31876be6a19f4d3b8a33ad3d5754ee91eeb
name: perl-true
arch: src
version: 0.18
epoch: 0
release: 7.fc23
summary: Automatically return a true value when a file is required
url: https://metacpan.org/release/true
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder09.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-true-0.18-7.fc23.src.rpm
checksum_type: sha256
description:
  Perl's require built-in (and its use wrapper) requires the files it loads to
  return a true value. This is usually accomplished by placing a single

  	1;

  statement at the end of included scripts or modules. It's not onerous to add
  but it's a speed bump on the Perl novice's road to enlightenment. In addition,
  it appears to be a non-sequitur to the uninitiated, leading some to attempt to
  mitigate its appearance with a comment:

  	1; # keep require happy
  or:
  	1; # Do not remove this line
  or even:
  	1; # Must end with this, because Perl is bogus.

  This module packages this "return true" behavior so that it need not be
  written explicitly. It can be used directly, but it is intended to be invoked
  from the import method of a Modern::Perl-style module that enables modern Perl
  features and conveniences and cleans up legacy Perl warts.


pkgId: 0a323da0e438ec6c61b88e9a45c31f9f9fe3d8062ba685f19c28323116a822ab
name: perl-utf8-all
arch: src
version: 0.016
epoch: 0
release: 3.fc23
summary: Turn on Unicode everywhere
url: http://search.cpan.org/dist/utf8-all/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder09.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-utf8-all-0.016-3.fc23.src.rpm
checksum_type: sha256
description:
  Pragma utf8 allows you to write your Perl encoded in UTF-8. That means UTF-8
  strings, variable names, and regular expressions. utf8::all goes further, and
  makes @ARGV encoded in UTF-8, and file handles are opened with UTF-8 encoding
  turned on by default (including STDIN, STDOUT, STDERR), and character names
  are imported so \N{...} sequences can be used to compile Unicode characters
  based on names. If you don't want UTF-8 for a particular file handle, you'll
  have to set binmode $filehandle.


pkgId: 181044a752d48944e122203fdd2293ddae1c12a24056b03d83dd72293379fd83
name: perl-version
arch: src
version: 0.99.12
epoch: 5
release: 4.fc23
summary: Perl extension for Version Objects
url: http://search.cpan.org/dist/version/
rpm_license: GPL+ or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder21.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perl-version-0.99.12-4.fc23.src.rpm
checksum_type: sha256
description:
  Version objects were added to Perl in 5.10. This module implements version
  objects for older version of Perl and provides the version object API for
  all versions of Perl. All previous releases before 0.74 are deprecated and
  should not be used due to incompatible API changes. Version 0.77 introduces
  the new 'parse' and 'declare' methods to standardize usage. You are
  strongly urged to set 0.77 as a minimum in your code.


pkgId: ab1a336cdac522bfd420f91473763098345361aef1d0e831183c39732162979d
name: perlbrew
arch: src
version: 0.73
epoch: 0
release: 3.fc23
summary: Manage perl installations in your $HOME
url: http://search.cpan.org/dist/App-perlbrew/
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-20.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perlbrew-0.73-3.fc23.src.rpm
checksum_type: sha256
description:
  perlbrew is a program to automate the building and installation of perl in
  the users HOME. At the moment, it installs everything to ~/perl5/perlbrew,
  and requires you to tweak your PATH by including a bashrc/cshrc file it
  provides. You then can benefit from not having to run 'sudo' commands to
  install cpan modules because those are installed inside your HOME too. It's
  almost like an isolated perl environments.


pkgId: 54a0e2c51c0672204ab605f601a8cc73952c4c119d10db437b7d70d88e3ee91f
name: perltidy
arch: src
version: 20150815
epoch: 0
release: 1.fc23
summary: Tool for indenting and re-formatting Perl scripts
url: http://perltidy.sourceforge.net/
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-04.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/perltidy-20150815-1.fc23.src.rpm
checksum_type: sha256
description:
  Perltidy is a Perl script that indents and re-formats Perl scripts to
  make them easier to read. If you write Perl scripts, or spend much
  time reading them, you will probably find it useful. The formatting
  can be controlled with command line parameters. The default parameter
  settings approximately follow the suggestions in the Perl Style Guide.
  Perltidy can also output HTML of both POD and source code. Besides
  re-formatting scripts, Perltidy can be a great help in tracking down
  errors with missing or extra braces, parentheses, and square brackets
  because it is very good at localizing errors.


pkgId: ecb7307e6d0c99ecc47868f27bffd2a30bbf88b3ef59aba5f85cb6f0d4823e8d
name: permlib
arch: src
version: 0.2.8
epoch: 0
release: 13.fc23
summary: Library for permutation computations
url: https://github.com/tremlin/PermLib
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm02-builder17.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/permlib-0.2.8-13.fc23.src.rpm
checksum_type: sha256
description:
  PermLib is a callable C++ library for permutation computations.
  Currently it supports set stabilizer and in-orbit computations, based on
  bases and strong generating sets (BSGS).  Additionally, it computes
  automorphisms of symmetric matrices and finds the lexicographically
  smallest set in an orbit of sets.


pkgId: c572db64d64aa43fc7df71c6caaafcdc81c33416e233e77be57dfd917a3642e5
name: pesign
arch: src
version: 0.108
epoch: 0
release: 4.fc22
summary: Signing utility for UEFI binaries
url: https://github.com/vathpela/pesign
rpm_license: GPLv2
rpm_vendor: Fedora Project
rpm_group: Development/System
rpm_buildhost: buildhw-07.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/pesign-0.108-4.fc22.src.rpm
checksum_type: sha256
description:
  This package contains the pesign utility for signing UEFI binaries as
  well as other associated tools.


pkgId: 2b566addac8543528488bf4704e469d27787ca0e6478c7ca3e1f20586a8b6eb0
name: pesign-test-app
arch: src
version: 0.4
epoch: 0
release: 15.fc23
summary: Simple pesign test target
url: https://github.com/vathpela/pesign-test-app
rpm_license: GPLv2
rpm_vendor: Fedora Project
rpm_group: Development/System
rpm_buildhost: bkernel02.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/pesign-test-app-0.4-15.fc23.src.rpm
checksum_type: sha256
description:
  This package contains a very simple UEFI application that effectively does
  nothing.  The entire purpose of this is to provide a safe app to be signed,
  so that we don't have to build large applications in order to test that
  deployments of new pesign versions into build infrastructure have succeeded.


pkgId: cd7f032a0063b5e083cc4ff031deb730f5de544da7900d4c939e418e7dfbf9d3
name: pessulus
arch: src
version: 2.30.3
epoch: 0
release: 9.fc23
summary: A lockdown editor for GNOME
url: http://live.gnome.org/Pessulus
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Applications/System
rpm_buildhost: buildvm-13.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/pessulus-2.30.3-9.fc23.src.rpm
checksum_type: sha256
description:
  Pessulus is a lockdown editor for GNOME, written in python. Pessulus
  enables administrators to set mandatory settings in GConf. The
  users can not change these settings.
  Use of pessulus can be useful on computers that are open to use by
  everyone, e.g. in an internet cafe.


pkgId: 78dbaf13d19f11c124791d247a6062d15dfccff9e8c59665caa4fc9e7bb49cfc
name: petit
arch: src
version: 1.1.1
epoch: 0
release: 7.fc23
summary: Log analysis tool for syslog, Apache and raw log files
url: http://crunchtools.com/software/petit/
rpm_license: GPLv3+
rpm_vendor: Fedora Project
rpm_group: Applications/System
rpm_buildhost: buildhw-07.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/petit-1.1.1-7.fc23.src.rpm
checksum_type: sha256
description:
  Log analysis tool which is useful to systems administrators & systems
  analysts. It interacts with syslog and Apache logs to clarify what is
  happening in logs.


pkgId: d2a7311ac53656c1ce03a5eaf712e95ac54a043e08fb4951e018f1fe1d4718d0
name: pfstools
arch: src
version: 2.0.4
epoch: 0
release: 1.fc23
summary: Programs for handling high-dynamic range images
url: http://pfstools.sourceforge.net/
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Applications/Multimedia
rpm_buildhost: arm04-builder14.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/pfstools-2.0.4-1.fc23.src.rpm
checksum_type: sha256
description:
  pfstools is a set of command line programs for reading,
  writing, manipulating and viewing high-dynamic range (HDR) images and
  video frames. All programs in the package exchange data using unix
  pipes and a simple generic HDR image format (pfs). The concept of the
  pfstools is similar to netpbm package for low-dynamic range images.


pkgId: c1843f8974e6d402c4fa727b106c45fc4bf15b2ecf5bac5eb456a4357d543b5d
name: pg-semver
arch: src
version: 0.5.0
epoch: 0
release: 3.fc23
summary: A semantic version data type for PostgreSQL
url: https://github.com/theory/pg-semver
rpm_license: PostgreSQL
rpm_vendor: Fedora Project
rpm_group: Applications/Databases
rpm_buildhost: arm02-builder15.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/pg-semver-0.5.0-3.fc23.src.rpm
checksum_type: sha256
description:
  PostgreSQL server extension implementing data type called "semver".
  It's an implementation of the version number format specified by the
  Semantic Versioning Specification.


pkgId: 2383e47905cd0d203138dc95f5114b140eec22dc3888122d77ef14b1e989938e
name: pgRouting
arch: src
version: 2.0.0
epoch: 0
release: 11.fc23
summary: Provides routing functionality to PostGIS/PostgreSQL
url: http://pgrouting.org
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Applications/Databases
rpm_buildhost: arm02-builder12.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/pgRouting-2.0.0-11.fc23.src.rpm
checksum_type: sha256
description:
  pgRouting extends the PostGIS / PostgreSQL geospatial database to provide
  geospatial routing functionality.


pkgId: 6030eeb7a57363cd3c0f071406215e4f52cdb3a66591e759b1f1ce8e805b18c4
name: pg_top
arch: src
version: 3.7.0
epoch: 0
release: 4.fc23
summary: 'top' for PostgreSQL process
url: http://pgfoundry.org/projects/ptop
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Applications/Databases
rpm_buildhost: arm04-builder10.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/pg_top-3.7.0-4.fc23.src.rpm
checksum_type: sha256
description:
  pg_top is 'top' for PostgreSQL processes. See running queries,
  query plans, issued locks, and table and index statistics.


pkgId: 44d4e731fec18b2c68ffb7ffabce922c1ccbc08d3c61bd2787ba65f33c9d5487
name: pg_view
arch: src
version: 1.2.0
epoch: 0
release: 3.20141118git11c942e.fc23
summary: Command-line tool to display the state of the PostgreSQL processes
url: https://github.com/zalando/pg_view
rpm_license: ASL 2.0
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm02-builder10.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/pg_view-1.2.0-3.20141118git11c942e.fc23.src.rpm
checksum_type: sha256
description:
  pg_view is a command-line tool to display the state of the PostgreSQL processes.
  It shows the per-process statistics combined with pg_stat_activity output
  for the processes that have the rows there, global system stats,
  per-partition information and the memory stats.


pkgId: 598cb1c09c9165dd8f9551977ae119d5a06e765a7ca158a59c2de722bc8164b4
name: pgadmin3
arch: src
version: 1.20.0
epoch: 0
release: 3.fc23
summary: Graphical client for PostgreSQL
url: http://www.pgadmin.org/
rpm_license: PostgreSQL
rpm_vendor: Fedora Project
rpm_group: Applications/Databases
rpm_buildhost: arm04-builder13.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/pgadmin3-1.20.0-3.fc23.src.rpm
checksum_type: sha256
description:
  pgAdmin III is a powerful administration and development
  platform for the PostgreSQL database, free for any use.
  It is designed to answer the needs of all users,
  from writing simple SQL queries to developing complex
  databases. The graphical interface supports all PostgreSQL
  features and makes administration easy.

  pgAdmin III is designed to answer the needs of all users,
  from writing simple SQL queries to developing complex databases.
  The graphical interface supports all PostgreSQL features and
  makes administration easy. The application also includes a syntax
  highlighting SQL editor, a server-side code editor, an
  SQL/batch/shell job scheduling agent, support for the Slony-I
  replication engine and much more. No additional drivers are
  required to communicate with the database server.


pkgId: 8f3f2c7b0a885f83de65ed9fddbe7eded96c02e3ceaf4d36c4a85fb872d35ca6
name: pgbouncer
arch: src
version: 1.5.4
epoch: 0
release: 5.fc23
summary: Lightweight connection pooler for PostgreSQL
url: http://pgfoundry.org/projects/pgbouncer/
rpm_license: MIT and BSD
rpm_vendor: Fedora Project
rpm_group: Applications/Databases
rpm_buildhost: arm04-builder10.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/pgbouncer-1.5.4-5.fc23.src.rpm
checksum_type: sha256
description:
  pgbouncer is a lightweight connection pooler for PostgreSQL.
  pgbouncer uses libevent for low-level socket handling.


pkgId: a82b0425967f27c7df4d87ab866797dfc660c3804037fdbb66cb1a4ebe176569
name: pgp-tools
arch: src
version: 2.1
epoch: 0
release: 1.fc23
summary: Collection of several utilities related to OpenPGP
url: http://pgp-tools.alioth.debian.org/
rpm_license: BSD and GPLv2+
rpm_vendor: Fedora Project
rpm_group: Applications/System
rpm_buildhost: arm04-builder04.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/pgp-tools-2.1-1.fc23.src.rpm
checksum_type: sha256
description:
  This is a collection of several projects relating to OpenPGP.

  * caff: CAcr - Fire and Forget signs and mails a key
  * pgp-clean: removes all non-self signatures from key
  * pgp-fixkey: removes broken packets from keys
  * gpg-mailkeys: simply mail out a signed key to its owner
  * gpg-key2ps: generate PostScript file with fingerprint paper strips
  * gpgdir: recursive directory encryption tool
  * gpglist: show who signed which of your UIDs
  * gpgsigs: annotates list of GnuPG keys with already done signatures
  * keylookup: ncurses wrapper around gpg --search
  * gpgparticipants: create list of party participants for the organiser
  * gpgwrap: a passphrase wrapper
  * keyanalyze: minimum signing distance (MSD) analysis on keyrings
  * sig2dot: converts a list of GnuPG signatures to a .dot file
  * springgraph: creates a graph from a .dot file

  In other distributions this package is called 'signing-party':


pkgId: 20c0a87fe7e09365db01c226b12a2dfdfd6a9d782bf533a5e7c28abbacdb6462
name: pgpdump
arch: src
version: 0.29
epoch: 0
release: 3.fc23
summary: PGP packet visualizer
url: http://www.mew.org/~kazu/proj/pgpdump/
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm04-builder06.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/pgpdump-0.29-3.fc23.src.rpm
checksum_type: sha256
description:
  pgpdump is a PGP packet visualizer which displays the packet format of
  OpenPGP (RFC 4880) and PGP version 2 (RFC 1991).


pkgId: ccc60b16920364f3f852cd68466e7c1c7502151ac85df43e23d7485d8e548a22
name: pgsphere
arch: src
version: 1.1.1
epoch: 0
release: 11.fc23
summary: Spherical data types, functions, and operators for PostgreSQL
url: http://pgfoundry.org/projects/pgsphere
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Applications/Databases
rpm_buildhost: arm04-builder19.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/pgsphere-1.1.1-11.fc23.src.rpm
checksum_type: sha256
description:
  pgSphere is a server side module for PostgreSQL. It contains methods for
  working with spherical coordinates and objects. It also supports indexing of
  spherical objects.


pkgId: 716abcb143d529193e4fed9a4bb8b18139f9d97b19b0a6c3b1e2b37a13069095
name: pgtoolkit
arch: src
version: 1.0.1
epoch: 0
release: 4.fc23
summary: Tools for PostgreSQL maintenance
url: https://github.com/grayhemp/pgtoolkit
rpm_license: PostgreSQL
rpm_vendor: Fedora Project
rpm_group: Applications/Databases
rpm_buildhost: arm02-builder20.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/pgtoolkit-1.0.1-4.fc23.src.rpm
checksum_type: sha256
description:
  PgToolkit is a collection of tools for PostgreSQL maintenance.
  PgToolkit so far uses the utility pgcompact to
  reduce PostgreSQL table and index bloat from databases.


pkgId: ce231a9b3006116a7e44c242cd0db7dd87316244b08b2bc41b7a70ece1c42ac4
name: pgtune
arch: src
version: 0.9.3
epoch: 0
release: 13.da57e00.fc23
summary: PostgreSQL Config Tuner
url: http://pgfoundry.org/projects/pgtune
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Applications/Databases
rpm_buildhost: arm02-builder12.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/pgtune-0.9.3-13.da57e00.fc23.src.rpm
checksum_type: sha256
description:
  pgtune takes the wimpy default postgresql.conf and expands the database server
  to be as powerful as the hardware it's being deployed on.


pkgId: 8788d00116f4031bd93b0e693811ac4f5383d94dd5bf1b126ea6882ee04a92c1
name: pharosc
arch: src
version: 8.3
epoch: 0
release: 10.fc23
summary: VLSI and ASIC Technology Standard Cell Libraries
url: http://www.vlsitechnology.org/
rpm_license: LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Applications/Engineering
rpm_buildhost: buildhw-07.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/pharosc-8.3-10.fc23.src.rpm
checksum_type: sha256
description:
  VLSI and ASIC Technology Standard Cell Libraries.
  There are five new open source standard cell libraries, the
   * vsclib,
   * wsclib,
   * vxlib,
   * vgalib and
   * rgalib.

  They have been drawn with the Graal software from Alliance,
  part of an extensive open source software suite for designing
  integrated circuits with a standard cell design methodology.


pkgId: b988038fbd30eafef940d36407abf1a982910fe37f91f5c944621a9e0154a95a
name: phasex
arch: src
version: 0.12.0
epoch: 0
release: 3.12.m1.fc23
summary: PHASEX -- Phase Harmonic Advanced Synthesis EXperiment
url: https://github.com/disabled/phasex-dev
rpm_license: GPLv2
rpm_vendor: Fedora Project
rpm_group: Applications/Multimedia
rpm_buildhost: arm02-builder02.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/phasex-0.12.0-3.12.m1.fc23.src.rpm
checksum_type: sha256
description:
  PHASEX is an experimental JACK audio / ALSA MIDI softsynth for Linux
  with a synth engine built around flexible phase modulation and
  flexible oscillator/LFO sourcing.  Modulations include AM, FM, offset
  PM, and wave select.  PHASEX comes equipped with a 12db/octave filter
  with two distortion curves, a stereo crossover delay and chorus with
  phaser, ADSR envelopes for amplifier and filter, realtime audio input
  processing capabilities, and more.


pkgId: 5eba61342bec2d3e7a0568a2702e7ecfb930e86e79d630ff0329bc16e7c6f787
name: phat
arch: src
version: 0.4.1
epoch: 0
release: 14.fc23
summary: A collection of GTK+ widgets useful for audio applications
url: http://phat.berlios.de/
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: System Environment/Libraries
rpm_buildhost: arm02-builder19.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/phat-0.4.1-14.fc23.src.rpm
checksum_type: sha256
description:
  PHAT is a collection of GTK+ widgets geared toward pro-audio apps. The
  goal is to eliminate duplication of effort and provide some
  standardization (well, at least for GTK+ apps).


pkgId: 5d5f33eb36c91b67af3dbd77b061cc9e22601e78f8d3413829e60cb1f3afb09f
name: phatch
arch: src
version: 0.2.7
epoch: 0
release: 22.fc23
summary: Photo batch processor
url: http://photobatch.stani.be/
rpm_license: GPLv3+
rpm_vendor: Fedora Project
rpm_group: Applications/Multimedia
rpm_buildhost: buildvm-23.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/phatch-0.2.7-22.fc23.src.rpm
checksum_type: sha256
description:
  Phatch is a simple to use cross-platform GUI Photo Batch Processor
  which handles all popular image formats and can duplicate
  (sub)folder hierarchies. Phatch can batch re-size, rotate,
  apply perspective, shadows, rounded corners, ...
  and more in minutes instead of hours or days if you do it manually.
  Phatch allows you to use EXIF and IPTC tags for renaming
  and data stamping. Phatch also supports a console version
  to batch photos on web-servers.


pkgId: fd7f884bb5b4f4901e1087397a2a782fe716fee1b54e522b1dd7dc03c3ed85b2
name: phetsarath-fonts
arch: src
version: 1.01
epoch: 0
release: 5.fc23
summary: The font for the Lao language
url: http://www.google.com/fonts/earlyaccess
rpm_license: OFL
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: arm04-builder23.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/phetsarath-fonts-1.01-5.fc23.src.rpm
checksum_type: sha256
description:
  This is a font for the Lao language which is commissioned by the Ministry of
  Posts and Telecommunications of the Laos government.


pkgId: be29aa0a49e77b51cbc16ebbc9070e9ff0a0f48a5bde463791fffc36c5a2c676
name: phoronix-test-suite
arch: src
version: 5.8.0
epoch: 0
release: 1.fc23
summary: An Automated, Open-Source Testing Framework
url: http://phoronix-test-suite.com/
rpm_license: GPLv3+
rpm_vendor: Fedora Project
rpm_group: Applications/System
rpm_buildhost: arm04-builder21.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/phoronix-test-suite-5.8.0-1.fc23.src.rpm
checksum_type: sha256
description:
  The Phoronix Test Suite is the most comprehensive testing and benchmarking
  platform available for the Linux operating system. This software is designed to
  effectively carry out both qualitative and quantitative benchmarks in a clean,
  reproducible, and easy-to-use manner. The Phoronix Test Suite consists of a
  lightweight processing core (pts-core) with each benchmark consisting of an
  XML-based profile with related resource scripts. The process from the benchmark
  installation, to the actual benchmarking, to the parsing of important hardware
  and software components is heavily automated and completely repeatable, asking
  users only for confirmation of actions.


pkgId: 24b6a5fa80bc73fcdf25a7b585bdbca7d442b69df2b5de40491ba1c27440a0bb
name: photocollage
arch: src
version: 1.3.0
epoch: 0
release: 2.fc23
summary: Graphical tool to make photo collage posters
url: https://github.com/adrienverge/PhotoCollage
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-08.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/photocollage-1.3.0-2.fc23.src.rpm
checksum_type: sha256
description:
  PhotoCollage allows you to create photo collage posters. It assembles the
  input photographs you give it to generate a big poster. Photos are arranged
  to fill the whole poster, however you can influence the algorithm to change the
  final layout. You can also set a custom border between photos, and save the
  generated image in the resolution you want.


pkgId: 8f7abad17e3f79009889e7cc0b6348af3fe5af249718f36da8746167ffdec78f
name: photoml
arch: src
version: 0.28
epoch: 0
release: 8.fc23
summary: An XML DTD and tools for describing photographic metadata
url: http://www.wohlberg.net/public/photo/software/photoml/
rpm_license: GPLv2
rpm_vendor: Fedora Project
rpm_group: Applications/Multimedia
rpm_buildhost: buildhw-12.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/photoml-0.28-8.fc23.src.rpm
checksum_type: sha256
description:
  Photo Description Markup Language (PhotoML) is primarily intended to
  provide an XML format and tools for describing details of photo
  creation, processing, and content in a collection of photographs. It
  is designed to be appropriate for a wide variety of photographic
  formats, including roll film (such as 35mm and 120/220), sheet film
  (such as 4x5 and 8x10) and digital images. The type of information
  represented, while allowing description of details of content,
  creation etc. for digital images, does not support some of the more
  low-level housekeeping details that might be necessary in an
  application such as an online database of digital images. In
  particular, PhotoML is not yet another web photo gallery generator.


pkgId: fa282c3630410ab64cbfbb6bd655f3be90b475b245890391c630a0f3a7d32a0d
name: photoprint
arch: src
version: 0.4.2
epoch: 0
release: 0.16.pre2.fc23
summary: Utility for printing digital photographs
url: http://blackfiveimaging.co.uk/index.php?article=02Software%2F01PhotoPrint
rpm_license: GPLv2+ and CC-BY
rpm_vendor: Fedora Project
rpm_group: Applications/Multimedia
rpm_buildhost: arm02-builder13.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/photoprint-0.4.2-0.16.pre2.fc23.src.rpm
checksum_type: sha256
description:
  PhotoPrint is a utility designed to assist in the process
  of printing digital photographs.
  PhotoPrint can do the following:

  * Print photographs 1-up, 2-up, 4-up or with any user-selectable
    number of rows and columns.
  * Create posters, split over several pages.
  * Arrange images into a sort of Carousel, fading from one to
    another.  (Ideal for CD labels)
  * Crop images to fit a specific frame.
  * Apply a decorative border to an image.
  * Make use of ICC colour profiles to provide accurate output.
  * Send 16-bit data to the printer, to avoid "contouring" problems
    in smooth gradients.
  * Apply a handful of effecs to an image, including sharpening,
    removing colour and adjusting colour temperature
    (ideal for cooling or warming black-and-white prints).


pkgId: 02d554e5c389ade682f6113d3d27c28d58f75a27d0e556ce43e3dd71466b95c9
name: php
arch: src
version: 5.6.14
epoch: 0
release: 1.fc23
summary: PHP scripting language for creating dynamic web sites
url: http://www.php.net/
rpm_license: PHP and Zend and BSD
rpm_vendor: Fedora Project
rpm_group: Development/Languages
rpm_buildhost: arm02-builder07.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-5.6.14-1.fc23.src.rpm
checksum_type: sha256
description:
  PHP is an HTML-embedded scripting language. PHP attempts to make it
  easy for developers to write dynamically generated web pages. PHP also
  offers built-in database integration for several commercial and
  non-commercial database management systems, so writing a
  database-enabled webpage with PHP is fairly simple. The most common
  use of PHP coding is probably as a replacement for CGI scripts.

  The php package contains the module (often referred to as mod_php)
  which adds support for the PHP language to Apache HTTP Server.


pkgId: 56004970e8c704b524641657d259f8b6dc25a90c0ff3405a868104ba389752af
name: php-Analog
arch: src
version: 1.0.0
epoch: 0
release: 6.git9ab4c9e.fc23
summary: PHP micro logging package
url: https://github.com/jbroadway/analog
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-22.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-Analog-1.0.0-6.git9ab4c9e.fc23.src.rpm
checksum_type: sha256
description:
  MicroPHP logging package based on the idea of using closures for
  configurability and extensibility. It functions as a static class,
  but you can completely control the writing of log messages through
  a closure function (aka anonymous functions).

  Analog also comes with over a dozen pre-written handlers,
  with examples for each in the examples folder. These include:
  - Amon - Send logs to the Amon server monitoring tool
  - Buffer - Buffer messages to send all at once (works with File,
    Mail, Stderr, and Variable handlers)
  - File - Append messages to a file
  - FirePHP - Send messages to FirePHP browser plugin
  - GELF - Send message to the Graylog2 log management server
  - LevelBuffer - Buffer messages and send only if sufficient error
    level reached
  - Mail - Send email notices
  - Mongo - Save to MongoDB collection, requires php-pecl(mongo)
    package to be installed
  - Multi - Send different log levels to different handlers
  - Null - Do nothing
  - Post - Send messages over HTTP POST to another machine
  - Stderr - Send messages to STDERR
  - Syslog - Send messages to syslog
  - Variable - Buffer messages to a variable reference.

  So while it's a micro class, it's highly extensible and very capable
  out of the box too.


pkgId: bca6fedb5512ca42b0c7768aa1817d4c651a2178660baeaa3318e1b3e270a864
name: php-Assetic
arch: src
version: 1.2.1
epoch: 0
release: 2.fc23
summary: Asset Management for PHP
url: https://github.com/kriswallsmith/assetic
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-13.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-Assetic-1.2.1-2.fc23.src.rpm
checksum_type: sha256
description:
  Assetic is an asset management framework for PHP.

  Optional dependency: APC (php-pecl-apc)

  Optional packages:
  * https://github.com/leafo/scssphp-compass
  * https://github.com/krichprollsch/phpCssEmbed


pkgId: 8afd0cebae93186022ddff19646a96b30709a56b7a58f670dda603dcda6a993e
name: php-EasyRdf
arch: src
version: 0.9.0
epoch: 0
release: 1.fc23
summary: A PHP library designed to make it easy to consume and produce RDF
url: http://www.easyrdf.org
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-03.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-EasyRdf-0.9.0-1.fc23.src.rpm
checksum_type: sha256
description:
  EasyRdf is a PHP library designed to make it easy to consume and produce RDF
  (http://en.wikipedia.org/wiki/Resource_Description_Framework). It was designed
  for use in mixed teams of experienced and inexperienced RDF developers. It is
  written in Object Oriented PHP and has been tested extensively using PHPUnit.

  After parsing EasyRdf builds up a graph of PHP objects that can then be walked
  around to get the data to be placed on the page. Dump methods are available to
  inspect what data is available during development.

  Data is typically loaded into a EasyRdf_Graph object from source RDF documents,
  loaded from the web via HTTP. The EasyRdf_GraphStore class simplifies loading
  and saving data to a SPARQL 1.1 Graph Store.

  SPARQL queries can be made over HTTP to a Triplestore using the
  EasyRdf_Sparql_Client class. SELECT and ASK queries will return an
  EasyRdf_Sparql_Result object and CONSTRUCT and DESCRIBE queries will
  return an EasyRdf_Graph object.

  Optional dependencies: graphviz, graphviz-gd, raptor2, php-redland


pkgId: 2f1f3d5022a06e1fc5b75a34bdafff14e23d26f8af5e0c18a339d0ab75cf0d1f
name: php-Faker
arch: src
version: 1.5.0
epoch: 0
release: 2.fc23
summary: A PHP library that generates fake data
url: https://github.com/fzaninotto/Faker
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-13.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-Faker-1.5.0-2.fc23.src.rpm
checksum_type: sha256
description:
  Faker is a PHP library that generates fake data for you. Whether you need
  to bootstrap your database, create good-looking XML documents, fill-in your
  persistence to stress test it, or anonymize data taken from a production
  service, Faker is for you.

  Faker is heavily inspired by Perl's Data::Faker [1], and by Ruby's Faker [2].

  Optional:
  * CakePHP (http://cakephp.org/)
  * Doctrine ORM (php-doctrine-orm)
  * Mandango (http://mandango.org/)
  * Propel (http://propelorm.org/)

  [1] http://search.cpan.org/~jasonk/Data-Faker/
  [2] http://faker.rubyforge.org/


pkgId: 234820c71049dec13abe2ae9c0cd0ff22ae46e3b73088f4d1edeff508baacf3d
name: php-IDNA_Convert
arch: src
version: 0.8.0
epoch: 0
release: 5.fc23
summary: Provides conversion of internationalized strings to UTF8
url: http://idnaconv.phlymail.de/
rpm_license: LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-02.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-IDNA_Convert-0.8.0-5.fc23.src.rpm
checksum_type: sha256
description:
  This converter allows you to transfer domain names between the encoded
  (Punycode) notation and the decoded (UTF-8) notation.


pkgId: abe33cb9a5088eac65ce6206b825948201db50d0aeff7e9f626fad34816abe84
name: php-JsonSchema
arch: src
version: 1.4.4
epoch: 0
release: 1.fc23
summary: PHP implementation of JSON schema
url: https://github.com/justinrainbow/json-schema
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-03.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-JsonSchema-1.4.4-1.fc23.src.rpm
checksum_type: sha256
description:
  A PHP implementation for validating JSON structures against a given schema.

  See http://json-schema.org for more details.


pkgId: 9a5c761178fcb2ebd765ddf05c78d57106100474dcdb19800a201bbaa96cd1d0
name: php-Kohana
arch: src
version: 2.4
epoch: 0
release: 1.rc2.fc23.7
summary: The Swift PHP Framework
url: http://kohanaframework.org
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-12.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-Kohana-2.4-1.rc2.fc23.7.src.rpm
checksum_type: sha256
description:
  Kohana is an elegant HMVC PHP5 framework that provides a rich set of
  components for building web applications.
  It requires very little configuration, fully supports UTF-8 and i18n,
  and provides many of the tools that a developer needs within a highly
  flexible system. The integrated class auto-loading, cascading file system,
  highly consistent API, and easy integration with vendor libraries make
  it viable for any project, large or small.


pkgId: 8fd5bc51ed75c1be949c3eea2418c99cb187bd70568e30b7aa9ae5e7ee3ff091
name: php-LightweightPicasaAPI
arch: src
version: 3.3
epoch: 0
release: 9.fc23
summary: A lightweight API for Picasa in PHP
url: http://cameronhinkle.com/
rpm_license: GPLv3+
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder11.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-LightweightPicasaAPI-3.3-9.fc23.src.rpm
checksum_type: sha256
description:
  PHP wrapper for Google's Picasa Data API, which is implemented using
  Atom feeds in XML.  The package is meant to make it easy for PHP
  developers to integrate their own applications with Picasa.


pkgId: 394190ed9fb764f84c831663b1288d9e167b008d4276f729b811b7d1b94870d2
name: php-Metadata
arch: src
version: 1.5.1
epoch: 0
release: 3.fc23
summary: A library for class/method/property metadata management in PHP
url: https://github.com/schmittjoh/metadata
rpm_license: ASL 2.0
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-16.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-Metadata-1.5.1-3.fc23.src.rpm
checksum_type: sha256
description:
  This library provides some commonly needed base classes for managing metadata
  for classes, methods and properties. The metadata can come from many different
  sources (annotations, YAML/XML/PHP configuration files).

  The metadata classes are used to abstract away that source and provide a common
  interface for all of them.


pkgId: fbc80b282f5430bd0be95fc9bac566862f541ca5168d419fce1bddf0267d6922
name: php-Monolog
arch: src
version: 1.17.1
epoch: 0
release: 1.fc23
summary: Sends your logs to files, sockets, inboxes, databases and various web services
url: https://github.com/Seldaek/monolog
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-19.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-Monolog-1.17.1-1.fc23.src.rpm
checksum_type: sha256
description:
  Monolog sends your logs to files, sockets, inboxes, databases and various web
  services. Special handlers allow you to build advanced logging strategies.

  This library implements the PSR-3 [1] interface that you can type-hint against
  in your own libraries to keep a maximum of interoperability. You can also use it
  in your applications to make sure you can always use another compatible logger
  at a later time.

  Optional:
  * php-aws-sdk (>= 2.8.13, < 3.0)
        Allow sending log messages to AWS services like DynamoDB
  * php-pecl-amqp
        Allow sending log messages to an AMQP server (1.0+ required)
  * php-pecl-mongo
        Allow sending log messages to a MongoDB server
  * php-Raven (>= 0.12.0, < 1.0)
        Allow sending log messages to a Sentry server
  * php-swift-Swift
        Allow sending log messages through Swiftmailer
  * https://github.com/doctrine/couchdb-client
        Allow sending log messages to a CouchDB server
  * https://github.com/Graylog2/gelf-php
        Allow sending log messages to a GrayLog2 server
  * https://docs.newrelic.com/docs/php/new-relic-for-php
        Allow sending log messages to a New Relic application
  * https://github.com/phpconsole/phpconsole
        Allow sending log messages to Google Chrome
  * https://github.com/rollbar/rollbar-php
        Allow sending log messages to Rollbar
  * https://github.com/ruflin/Elastica
        Allow sending log messages to an Elastic Search server
  * https://github.com/videlalvaro/php-amqplib
        Allow sending log messages to an AMQP server using php-amqplib

  [1] http://www.php-fig.org/psr/psr-3/


pkgId: 737391b5422906647fa92a0cdb59c8d53a6cac91977f2f7e2ceaccd839abf209
name: php-PHP-CSS-Parser
arch: src
version: 6.0.0
epoch: 0
release: 2.20141009giteb29754.fc23
summary: A Parser for CSS Files
url: https://github.com/sabberworm/PHP-CSS-Parser
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder11.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-PHP-CSS-Parser-6.0.0-2.20141009giteb29754.fc23.src.rpm
checksum_type: sha256
description:
  PHP CSS Parser: a Parser for CSS Files written in PHP.
  Allows extraction of CSS files into a data structure, manipulation
  of said structure and output as (optimized) CSS.


pkgId: deb1d8deef7beb41150418edadc67612736cdfca8eaafb715d1568e642f78ef8
name: php-PHPMailer
arch: src
version: 5.2.9
epoch: 0
release: 2.fc23
summary: PHP email transport class with a lot of features
url: http://phpmailer.worxware.com/
rpm_license: LGPLv2+
rpm_vendor: Fedora Project
rpm_group: System Environment/Libraries
rpm_buildhost: buildvm-11.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-PHPMailer-5.2.9-2.fc23.src.rpm
checksum_type: sha256
description:
  Full Featured Email Transfer Class for PHP. PHPMailer features:

      * Supports emails digitally signed with S/MIME encryption!
      * Supports emails with multiple TOs, CCs, BCCs and REPLY-TOs
      * Works on any platform.
      * Supports Text & HTML emails.
      * Embedded image support.
      * Multipart/alternative emails for mail clients that do not read
        HTML email.
      * Flexible debugging.
      * Custom mail headers.
      * Redundant SMTP servers.
      * Support for 8bit, base64, binary, and quoted-printable encoding.
      * Word wrap.
      * Multiple fs, string, and binary attachments (those from database,
        string, etc).
      * SMTP authentication.
      * Tested on multiple SMTP servers: Sendmail, qmail, Postfix, Gmail,
        Imail, Exchange, etc.
      * Good documentation, many examples included in download.
      * It's swift, small, and simple.


pkgId: df54d14e741d37a9d1acc580bf080a635bc92fe2c826776acbbca23f653798b3
name: php-PHPParser
arch: src
version: 1.4.1
epoch: 0
release: 1.fc23
summary: A PHP parser written in PHP
url: https://github.com/nikic/PHP-Parser
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-10.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-PHPParser-1.4.1-1.fc23.src.rpm
checksum_type: sha256
description:
  A PHP parser written in PHP to simplify static analysis and code manipulation.

  To use this library, you just have to add, in your project:
    require_once '/usr/share/php/PhpParser/autoload.php';


pkgId: 2a1c38ac67ac45a63d0ca32b49e358fec07dccefcb1ef716b63e94cc0e611ef6
name: php-PhpCollection
arch: src
version: 0.4.0
epoch: 0
release: 4.fc23
summary: General purpose collection library for PHP
url: http://jmsyst.com/libs/php-collection
rpm_license: ASL 2.0
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-15.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-PhpCollection-0.4.0-4.fc23.src.rpm
checksum_type: sha256
description:
  This library adds basic collections for PHP.

  Collections can be seen as more specialized arrays for which certain contracts
  are guaranteed.

  Supported Collections:
  * Sequences
  ** Keys: numerical, consequentially increasing, no gaps
  ** Values: anything, duplicates allowed
  ** Classes: Sequence, SortedSequence
  * Maps
  ** Keys: strings or objects, duplicate keys not allowed
  ** Values: anything, duplicates allowed
  ** Classes: Map, ObjectMap (not yet implemented)
  * Sets (not yet implemented)
  ** Keys: not meaningful
  ** Values: anything, each value must be unique (===)
  ** Classes: Set

  General Characteristics:
  * Collections are mutable (new elements may be added, existing elements may be
    modified or removed). Specialized immutable versions may be added in the
    future though.
  * Equality comparison between elements are always performed using the shallow
    comparison operator (===).
  * Sorting algorithms are unstable, that means the order for equal elements is
    undefined (the default, and only PHP behavior).


pkgId: 6ec576ea77f826b9034f968e980dd66aaf14c44035adb239b06872dbcab4b7ec
name: php-PhpOption
arch: src
version: 1.4.0
epoch: 0
release: 4.fc23
summary: Option type for PHP
url: https://github.com/schmittjoh/php-option
rpm_license: ASL 2.0
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-04.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-PhpOption-1.4.0-4.fc23.src.rpm
checksum_type: sha256
description:
  This package adds an Option type for PHP.

  The Option type is intended for cases where you sometimes might return a value
  (typically an object), and sometimes you might return no value (typically null)
  depending on arguments, or other runtime factors.

  Often times, you forget to handle the case where no value is returned. Not
  intentionally of course, but maybe you did not account for all possible states
  of the system; or maybe you indeed covered all cases, then time goes on, code
  is refactored, some of these your checks might become invalid, or incomplete.
  Suddenly, without noticing, the no value case is not handled anymore. As a
  result, you might sometimes get fatal PHP errors telling you that you called a
  method on a non-object; users might see blank pages, or worse.

  On one hand, the Option type forces a developer to consciously think about both
  cases (returning a value, or returning no value). That in itself will already
  make your code more robust. On the other hand, the Option type also allows the
  API developer to provide more concise API methods, and empowers the API user in
  how he consumes these methods.


pkgId: f521affdca5c5b2375bc4fbef0b347683a9473ff380489d8e1018ce4f917aec8
name: php-PsrLog
arch: src
version: 1.0.0
epoch: 0
release: 7.fc23
summary: Common interface for logging libraries
url: http://www.php-fig.org/psr/psr-3/
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-05.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-PsrLog-1.0.0-7.fc23.src.rpm
checksum_type: sha256
description:
  This package holds all interfaces/classes/traits related to PSR-3
  (https://github.com/php-fig/fig-standards/blob/master/accepted/PSR-3-logger-interface.md).

  Note that this is not a logger of its own. It is merely an interface that
  describes a logger. See the specification for more details.


pkgId: adfbb098ca58be42e5c36855907977a06a1ad4b5f77d3d25c035438dfc872bc9
name: php-Slim
arch: src
version: 2.4.3
epoch: 0
release: 3.fc23
summary: PHP micro framework
url: http://www.slimframework.com/
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder04.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-Slim-2.4.3-3.fc23.src.rpm
checksum_type: sha256
description:
  Slim is a PHP micro framework that helps you quickly write simple yet
  powerful web applications and APIs.

  Features:
  - Powerful router
      - Standard and custom HTTP methods
      - Route parameters with wildcards and conditions
      - Route redirect, halt, and pass
      - Route middleware
  - Template rendering with custom views
  - Flash messages
  - Secure cookies with AES-256 encryption
  - HTTP caching
  - Logging with custom log writers
  - Error handling and debugging
  - Middleware and hook architecture
  - Simple configuration


pkgId: 956c7f83b9702dc67cc7df7d837daddb02cd9569de72510a364308f720248e1b
name: php-Smarty
arch: src
version: 3.1.21
epoch: 0
release: 3.fc23
summary: Template/Presentation Framework for PHP
url: http://www.smarty.net
rpm_license: LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-12.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-Smarty-3.1.21-3.fc23.src.rpm
checksum_type: sha256
description:
  Although Smarty is known as a "Template Engine", it would be more accurately
  described as a "Template/Presentation Framework." That is, it provides the
  programmer and template designer with a wealth of tools to automate tasks
  commonly dealt with at the presentation layer of an application. I stress the
  word Framework because Smarty is not a simple tag-replacing template engine.
  Although it can be used for such a simple purpose, its focus is on quick and
  painless development and deployment of your application, while maintaining
  high-performance, scalability, security and future growth.


pkgId: e79a563dbb9cf42fa81aa2619b6857dba193755506537af2d6c3d09497023dcf
name: php-SymfonyCmfRouting
arch: src
version: 1.3.0
epoch: 0
release: 2.fc23
summary: Extends the Symfony2 routing component for dynamic routes and chaining
url: http://symfony.com/doc/master/cmf/book/routing.html
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder10.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-SymfonyCmfRouting-1.3.0-2.fc23.src.rpm
checksum_type: sha256
description:
  The Symfony CMF Routing component extends the Symfony2 core routing component.
  It provides:
  * A ChainRouter to run several routers in parallel
  * A DynamicRouter that can load routes from any database and can generate
        additional information in the route match

  Even though it has Symfony in its name, the Routing component does not need the
  full Symfony2 Framework and can be used in standalone projects.


pkgId: 2a79079d9c700a6469527d68db5f9563b287e21c13ab0bc17563362e74f1d077
name: php-ZendFramework
arch: src
version: 1.12.13
epoch: 0
release: 2.fc23
summary: Leading open-source PHP framework
url: http://framework.zend.com/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder22.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-ZendFramework-1.12.13-2.fc23.src.rpm
checksum_type: sha256
description:
  Extending the art & spirit of PHP, Zend Framework is based on simplicity,
  object-oriented best practices, corporate friendly licensing, and a rigorously
  tested agile code base. Zend Framework is focused on building more secure,
  reliable, and modern Web 2.0 applications & web services, and consuming widely
  available APIs from leading vendors like Google, Amazon, Yahoo!, Flickr, as
  well as API providers and catalogers like StrikeIron and ProgrammableWeb.


pkgId: 0fc3a7b68186ea19e943090d5311fdc731e242f9652fb899f68c376d85dbc10c
name: php-ZendFramework2
arch: src
version: 2.4.8
epoch: 0
release: 1.fc23
summary: Zend Framework 2
url: http://framework.zend.com
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder13.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-ZendFramework2-2.4.8-1.fc23.src.rpm
checksum_type: sha256
description:
  Zend Framework 2 is an open source framework for developing web applications
  and services using PHP 5.3+. Zend Framework 2 uses 100% object-oriented code
  and utilizes most of the new features of PHP 5.3, namely namespaces, late
  static binding, lambda functions and closures.

  Zend Framework 2 evolved from Zend Framework 1, a successful PHP framework
  with over 15 million downloads.

  Note: This meta package installs all base Zend Framework component packages
  (Authentication, Barcode, Cache, Captcha, Code, Config, Console, Crypt, Db,
  Debug, Di, Dom, Escaper, EventManager, Feed, File, Filter, Form, Http, I18n,
  InputFilter, Json, Ldap, Loader, Log, Mail, Math, Memory, Mime, ModuleManager,
  Mvc, Navigation, Paginator, Permissions-Acl, Permissions-Rbac, ProgressBar,
  Serializer, Server, ServiceManager, Session, Soap, Stdlib, Tag, Test, Text,
  Uri, Validator, Version, View, XmlRpc) except the optional Cache-apc and
  Cache-memcached packages.


pkgId: cdb63d568202ccc2286aed57a5b7775eb05b02970264c2d583790d1728b885b6
name: php-adodb
arch: src
version: 5.15
epoch: 0
release: 8.fc23
summary: Database abstraction layer for PHP
url: http://adodb.sf.net
rpm_license: BSD or LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder04.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-adodb-5.15-8.fc23.src.rpm
checksum_type: sha256
description:
  ADOdb is an object oriented library written in PHP that abstracts database
  operations for portability. It is modelled on Microsoft's ADO, but has many
  improvements that make it unique (eg. pivot tables, Active Record support,
  generating HTML for paging recordsets with next and previous links, cached
  recordsets, HTML menu generation, etc).
  ADOdb hides the differences between the different databases so you can easily
  switch DBs without changing code.


pkgId: cb01986e6c191ea8ff9f4d7fb9d220e74f7b90e50811d93827e5b2b03d19ecea
name: php-aws-sdk
arch: src
version: 2.8.20
epoch: 0
release: 1.fc23
summary: Amazon Web Services framework for PHP
url: http://aws.amazon.com/sdk-for-php/
rpm_license: ASL 2.0
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-11.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-aws-sdk-2.8.20-1.fc23.src.rpm
checksum_type: sha256
description:
  Amazon Web Services SDK for PHP enables developers to build solutions for
  Amazon Simple Storage Service (Amazon S3), Amazon Elastic Compute Cloud
  (Amazon EC2), Amazon SimpleDB, and more.

  Optional:
  * APC (php-pecl-apcu):
        Allows service description opcode caching, request and response caching,
        and credentials caching
  * Doctrine Cache (php-doctrine-cache):
        Adds support for caching of credentials and responses
  * Monolog (php-Monolog):
        Adds support for logging HTTP requests and responses
  * Symfony YAML (php-symfony-yaml):
        Eases the ability to write manifests for creating jobs in AWS
        Import/Export


pkgId: 29990c21453f26c78537b3f6eea99cb5d068ebdb484486ae61c011b24cffcbe1
name: php-bartlett-PHP-CompatInfo
arch: src
version: 4.4.0
epoch: 0
release: 2.fc23
summary: Find out version and the extensions required for a piece of code to run
url: http://php5.laurent-laville.org/compatinfo/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder18.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-bartlett-PHP-CompatInfo-4.4.0-2.fc23.src.rpm
checksum_type: sha256
description:
  PHP_CompatInfo will parse a file/folder/array to find out the minimum
  version and extensions required for it to run. CLI version has many reports
  (extension, interface, class, function, constant) to display and ability to
  show content of dictionary references.

  Documentation: http://php5.laurent-laville.org/compatinfo/manual/current/en/


pkgId: b35fae760645d1be871cb6dea76428ee562d4fcd10cdddf470bb8f95c995605f
name: php-bartlett-PHP-Reflect
arch: src
version: 3.1.2
epoch: 0
release: 1.fc23
summary: Adds the ability to reverse-engineer PHP
url: http://php5.laurent-laville.org/reflect/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder17.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-bartlett-PHP-Reflect-3.1.2-1.fc23.src.rpm
checksum_type: sha256
description:
  PHP_Reflect adds the ability to reverse-engineer classes, interfaces,
  functions, constants and more, by connecting php callbacks to other tokens.

  Documentation: http://php5.laurent-laville.org/reflect/manual/current/en/


pkgId: ea6e5fb090cb0fea48440b621be52237a36d18efcc0a7b44dc8d1f520026d20a
name: php-bartlett-umlwriter
arch: src
version: 1.0.1
epoch: 0
release: 1.fc23
summary: Create UML class diagrams from your PHP source
url: http://php5.laurent-laville.org/umlwriter/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-17.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-bartlett-umlwriter-1.0.1-1.fc23.src.rpm
checksum_type: sha256
description:
  This tool wil generate UML class diagrams with all class,
  interface and trait definitions in your PHP project.

  * reverse-engine interchangeable (currently support Bartlett\Reflect
    and Andrewsville\TokenReflection)
  * UML syntax processor interchangeable (currently support Graphviz
    and PlantUML)
  * generates a class and its direct dependencies
  * generates a namespace with all objects
  * generates a full package with all namespaces and objects


pkgId: 81e280ed3b56021400e369da8da1b47d92b6470d63e77d7f4524c4f35b761084
name: php-captchaphp
arch: src
version: 2.3
epoch: 0
release: 7.fc23
summary: PHP very user-friendly CAPTCHA solution
url: http://freshmeat.net/projects/captchaphp/
rpm_license: Public Domain or MIT
rpm_vendor: Fedora Project
rpm_group: System Environment/Libraries
rpm_buildhost: buildvm-06.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-captchaphp-2.3-7.fc23.src.rpm
checksum_type: sha256
description:
    This PHP script provides a very user-friendly CAPTCHA solution.
  You can easily embed it into your <form> generation scripts to
  prevent spam-bot access.

  It strives to be accessible and implements an arithmetic riddle
  as alternative for visually impaired users. It does not require
  cookies, but makes use of "AJAX" to give users visual feedback
  for solving the CAPTCHA. It grants access fuzzily (when single
  letters were outguessed) instead of frustrating people. And it
  can be customized rather easily.


pkgId: 507b45d531cb96f37c0841bb95017e6b291a091a7e6ecd38c345e31317994809
name: php-channel-deepend
arch: src
version: 1.3
epoch: 0
release: 9.fc23
summary: Survive The Deep End PEAR Channel
url: http://www.survivethedeepend.com/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Languages
rpm_buildhost: buildvm-18.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-channel-deepend-1.3-9.fc23.src.rpm
checksum_type: sha256
description:
  This package adds the Survive The Deep End PEAR Channel which allows
  PEAR packages from this channel to be installed.


pkgId: ac7c0f7597f24ca6f088619afae63ad7399b4cc76f011a6f6ade9022e5c43d72
name: php-channel-digitalsandwich
arch: src
version: 1.3
epoch: 0
release: 7.fc23
summary: Adds digitalsandwich channel to PEAR
url: http://digitalsandwich.com/
rpm_license: Public Domain
rpm_vendor: Fedora Project
rpm_group: Development/Languages
rpm_buildhost: buildvm-14.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-channel-digitalsandwich-1.3-7.fc23.src.rpm
checksum_type: sha256
description:
  This package adds the digitalsandwich channel which allows
  PEAR packages from this channel to be installed.


pkgId: f87cde49776b5a50283581a52ed6f67f79f3480a64215e5e9a256eea1ca5704c
name: php-channel-dropbox-php
arch: src
version: 1.3
epoch: 0
release: 6.fc23
summary: Adds the Dropbox-PHP channel to PEAR
url: http://www.dropbox-php.com/
rpm_license: Public Domain
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildhw-12.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-channel-dropbox-php-1.3-6.fc23.src.rpm
checksum_type: sha256
description:
  This package adds the Dropbox-PHP channel which allows PEAR packages
  from this channel to be installed.


pkgId: 2cd6491c9a6630d2dae4ec89e89d2c206cb094fbe6981beea029a42e7e0267dc
name: php-channel-drush
arch: src
version: 1.3
epoch: 0
release: 5.fc23
summary: Adds pear.drush.org channel to PEAR
url: http://pear.drush.org
rpm_license: Public Domain
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-10.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-channel-drush-1.3-5.fc23.src.rpm
checksum_type: sha256
description:
  This package adds the pear.drush.org channel which allows PEAR packages
  from this channel to be installed.


pkgId: 3343f4b664f347cf0e327e30585139e306c2f95e40c11b9a686fcf333d22158e
name: php-channel-ezc
arch: src
version: 1
epoch: 0
release: 9.fc23
summary: Adds eZ Components channel to PEAR
url: http://ezcomponents.org/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-11.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-channel-ezc-1-9.fc23.src.rpm
checksum_type: sha256
description:
  This package adds the eZ Components channel which allows PEAR packages
  from this channel to be installed.


pkgId: 376e044cedecf6dcc655d33c38fc333466ab6dabbbc6eab11e62c0492a84e3de
name: php-channel-horde
arch: src
version: 1.0
epoch: 0
release: 6.fc23
summary: Adds pear.horde.org channel to PEAR
url: http://pear.horde.org/
rpm_license: Public Domain
rpm_vendor: Fedora Project
rpm_group: Development/Languages
rpm_buildhost: buildvm-24.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-channel-horde-1.0-6.fc23.src.rpm
checksum_type: sha256
description:
  This package adds the pear.horde.org channel which allows PEAR packages
  from this channel to be installed.


pkgId: 519c8983b014bb4973b30c233c87becbf275b47e8a7ea167323d27c1010d9fac
name: php-channel-htmlpurifier
arch: src
version: 1.0
epoch: 0
release: 9.fc23
summary: Adds htmlpurifier channel to PEAR
url: http://htmlpurifier.org
rpm_license: Public Domain
rpm_vendor: Fedora Project
rpm_group: Development/Languages
rpm_buildhost: buildhw-11.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-channel-htmlpurifier-1.0-9.fc23.src.rpm
checksum_type: sha256
description:
  This package adds the htmlpurifier channel which allows PEAR packages
  from this channel to be installed.


pkgId: 2af7bb56886adc1433779910fbe0c55fb926c264c295d593336c876dbe49ecb1
name: php-channel-nrk
arch: src
version: 1.3
epoch: 0
release: 4.fc23
summary: Adds pear.nrk.io channel to PEAR
url: http://pear.nrk.io/
rpm_license: Public Domain
rpm_vendor: Fedora Project
rpm_group: Development/Languages
rpm_buildhost: buildhw-12.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-channel-nrk-1.3-4.fc23.src.rpm
checksum_type: sha256
description:
  This package adds the pear.nrk.io channel which allows PEAR packages
  from this channel to be installed.


pkgId: 3bcd005d5a48cfe9febc21163f14aa80e6061897ade6a5a63f256be312ddd194
name: php-channel-pearplex
arch: src
version: 1.3
epoch: 0
release: 8.fc23
summary: Adds the PearPlex channel to PEAR
url: http://www.pearplex.net/
rpm_license: Public Domain
rpm_vendor: Fedora Project
rpm_group: Development/Languages
rpm_buildhost: buildhw-07.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-channel-pearplex-1.3-8.fc23.src.rpm
checksum_type: sha256
description:
  This package adds the PearPlex channel which allows PEAR packages
  from this channel to be installed.


pkgId: 47825365547434483483a5a7be39308048828a55b8836490da20b9658b2e655e
name: php-channel-phpqatools
arch: src
version: 1.3
epoch: 0
release: 8.fc23
summary: Adds phpqatools channel to PEAR
url: http://phpqatools.org/
rpm_license: Public Domain
rpm_vendor: Fedora Project
rpm_group: Development/Languages
rpm_buildhost: buildvm-06.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-channel-phpqatools-1.3-8.fc23.src.rpm
checksum_type: sha256
description:
  This package adds the phpqatools channel which allows
  PEAR packages from this channel to be installed.


pkgId: 623a940db56cf5ebadb924ae0033284c1b441392e9e1fe5457f3aa997090089a
name: php-channel-phpseclib
arch: src
version: 1.3
epoch: 0
release: 3.fc23
summary: Adds the phpseclib channel to PEAR
url: http://phpseclib.sourceforge.net/
rpm_license: Public Domain
rpm_vendor: Fedora Project
rpm_group: Development/Languages
rpm_buildhost: buildhw-02.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-channel-phpseclib-1.3-3.fc23.src.rpm
checksum_type: sha256
description:
  This package adds the phpseclib channel which allows PEAR packages
  from this channel to be installed.


pkgId: fd0f5fc1c235dfd491bbd3bfa9fced5821728eeb4ba35dd0e4e31d2f60a29dc1
name: php-channel-pirum
arch: src
version: 1.3
epoch: 0
release: 5.fc23
summary: Adds pear.pirum-project.org channel to PEAR
url: http://pear.pirum-project.org
rpm_license: Public Domain
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder22.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-channel-pirum-1.3-5.fc23.src.rpm
checksum_type: sha256
description:
  This package adds the pear.pirum-project.org channel which allows PEAR packages
  from this channel to be installed.


pkgId: 2580aeb17a090bf49077b59b7b8d6510cab67b2fb7bc57eca15051ff1faaad83
name: php-channel-sabredav
arch: src
version: 1.3
epoch: 0
release: 7.fc23
summary: Adds the SabreDAV channel to PEAR
url: http://code.google.com/p/sabredav
rpm_license: Public Domain
rpm_vendor: Fedora Project
rpm_group: Development/Languages
rpm_buildhost: buildhw-02.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-channel-sabredav-1.3-7.fc23.src.rpm
checksum_type: sha256
description:
  This package adds the SabreDAV channel which allows PEAR packages
  from this channel to be installed.


pkgId: 6816e0d8e3de46870f786fdbd0ca25c0cc54c065f1c1d7e359676cfa537aee30
name: php-channel-swift
arch: src
version: 1.3
epoch: 0
release: 10.fc23
summary: Adds swift mailer project channel to PEAR
url: http://www.swiftmailer.org/
rpm_license: LGPLv3
rpm_vendor: Fedora Project
rpm_group: Development/Languages
rpm_buildhost: buildhw-10.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-channel-swift-1.3-10.fc23.src.rpm
checksum_type: sha256
description:
  This package adds the swift mailer channel which allows
  PEAR packages from this channel to be installed.


pkgId: 6537caa3ba6b97c4fa5cc24802c6ff72946c47feab704a28e6b3d0996273e538
name: php-channel-symfony2
arch: src
version: 1.3
epoch: 0
release: 5.fc23
summary: Adds pear.symfony.com channel to PEAR
url: http://pear.symfony.com
rpm_license: Public Domain
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-23.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-channel-symfony2-1.3-5.fc23.src.rpm
checksum_type: sha256
description:
  This package adds the pear.symfony.com channel which allows PEAR packages from
  this channel to be installed.


pkgId: 3829fb4b1ecb4cf45dfe4c8a4b2cf41ca710f31b3a7c4cf01f5832f7a7816d08
name: php-composer-installers
arch: src
version: 1.0.21
epoch: 0
release: 1.fc23
summary: A multi-framework Composer library installer
url: https://github.com/composer/installers
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder07.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-composer-installers-1.0.21-1.fc23.src.rpm
checksum_type: sha256
description:
  This is for PHP package authors to require in their composer.json. It will
  install their package to the correct location based on the specified package
  type.

  The goal of installers is to be a simple package type to install path map.
  Users can also customize the install path per package and package authors
  can modify the package name upon installing.

  installers isn't intended on replacing all custom installers. If your package
  requires special installation handling then by all means, create a custom
  installer to handle it.


pkgId: 9ce7dab95900eff000b469f017b574cc31c1c2214c8ffcde84a6e4ee497a4d3f
name: php-composer-spdx-licenses
arch: src
version: 1.1.1
epoch: 0
release: 1.fc23
summary: SPDX licenses list and validation library
url: https://github.com/composer/spdx-licenses
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-06.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-composer-spdx-licenses-1.1.1-1.fc23.src.rpm
checksum_type: sha256
description:
  SPDX licenses list and validation library.

  Originally written as part of composer/composer,
  now extracted and made available as a stand-alone library.


pkgId: d6907aecb1731ef0dd33caa153dfe289e34983bd16fa1c08d8beb575402c0d49
name: php-d11wtq-boris
arch: src
version: 1.0.10
epoch: 0
release: 3.fc23
summary: A tiny, but robust REPL (Read-Evaluate-Print-Loop) for PHP
url: https://github.com/borisrepl/boris
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-03.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-d11wtq-boris-1.0.10-3.fc23.src.rpm
checksum_type: sha256
description:
  Python has one. Ruby has one. Clojure has one. Now PHP has one, too. Boris is
  PHP's missing REPL (read-eval-print loop), allowing developers to experiment
  with PHP code in the terminal in an interactive manner. If you make a mistake,
  it doesn't matter, Boris will report the error and stand to attention for
  further input.

  Everything you enter into Boris is evaluated and the result inspected so you
  can understand what is happening. State is maintained between inputs, allowing
  you to gradually build up a solution to a problem.


pkgId: f0c62172e86ef4af48db4f0c07cc030fc5097fc9717bee83b9664f0693efbcae
name: php-deepend-Mockery
arch: src
version: 0.9.1
epoch: 0
release: 3.fc23
summary: Mockery is a simple but flexible PHP mock object framework
url: http://github.com/padraic/mockery
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder16.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-deepend-Mockery-0.9.1-3.fc23.src.rpm
checksum_type: sha256
description:
  Mockery is a simple but flexible PHP mock object framework for use in unit
  testing. It is inspired by Ruby's flexmock and Java's Mockito, borrowing
  elements from both of their APIs.


pkgId: 3251ac3c48bb772b81179476c408faf8de4bcd517226ac8a7c748587c1654721
name: php-digitalsandwich-Phake
arch: src
version: 1.0.2
epoch: 0
release: 7.fc23
summary: Phake is a PHP mocking framework that is based on Mockito
url: http://digitalsandwich.com/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder05.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-digitalsandwich-Phake-1.0.2-7.fc23.src.rpm
checksum_type: sha256
description:
  Phake is a framework for PHP that aims to provide mock objects, test doubles
  and method stubs.

  Phake was inspired by a lack of flexibility and ease of use in the current
  mocking frameworks combined with a recent experience with Mockito for Java.


pkgId: e39066b3627bcd454df98eb73a0da7c39296ce6dfd03dd5019e8e3e47f1fff26
name: php-doctrine-cache
arch: src
version: 1.4.2
epoch: 0
release: 1.fc23
summary: Doctrine Cache
url: https://github.com/doctrine/cache
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-09.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-doctrine-cache-1.4.2-1.fc23.src.rpm
checksum_type: sha256
description:
  Cache component extracted from the Doctrine Common project.

  Optional:
  * APC (php-pecl-apc)
  * Couchbase (http://pecl.php.net/package/couchbase)
  * Memcache (php-pecl-memcache)
  * Memcached (php-pecl-memcached)
  * MongoDB (php-pecl-mongo)
  * Redis (php-pecl-redis)
  * Riak (http://pecl.php.net/package/riak)
  * XCache (php-xcache)


pkgId: 42758f3c5fa5071a938b9819ba2d99441973a4ce2e2e9dad91ce45fb1bffe94a
name: php-doctrine-datafixtures
arch: src
version: 1.0.2
epoch: 0
release: 1.fc23
summary: Data Fixtures for all Doctrine Object Managers
url: https://github.com/doctrine/data-fixtures
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-10.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-doctrine-datafixtures-1.0.2-1.fc23.src.rpm
checksum_type: sha256
description:
  This extension aims to provide a simple way to manage and execute the loading
  of data fixtures for the Doctrine ORM or ODM.


pkgId: 735072b5af6107c6eb95c096c25d19d2a23a4e047b7bb84b3f1e6b845cd5444e
name: php-doctrine-dbal
arch: src
version: 2.5.1
epoch: 0
release: 2.fc23
summary: Doctrine Database Abstraction Layer (DBAL)
url: http://www.doctrine-project.org/projects/dbal.html
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-07.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-doctrine-dbal-2.5.1-2.fc23.src.rpm
checksum_type: sha256
description:
  The Doctrine database abstraction & access layer (DBAL) offers a lightweight
  and thin runtime layer around a PDO-like API and a lot of additional, horizontal
  features like database schema introspection and manipulation through an OO API.

  The fact that the Doctrine DBAL abstracts the concrete PDO API away through the
  use of interfaces that closely resemble the existing PDO API makes it possible
  to implement custom drivers that may use existing native or self-made APIs. For
  example, the DBAL ships with a driver for Oracle databases that uses the oci8
  extension under the hood.


pkgId: cfe255e6e0461acae79d12d8d9e92cb5d0744c319190b924b261f5c5f7b09fee
name: php-doctrine-doctrine-bundle
arch: src
version: 1.5.2
epoch: 0
release: 1.fc23
summary: Symfony Bundle for Doctrine
url: https://github.com/doctrine/DoctrineBundle
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-21.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-doctrine-doctrine-bundle-1.5.2-1.fc23.src.rpm
checksum_type: sha256
description:
  Doctrine DBAL & ORM Bundle for the Symfony Framework.

  Optional:
  * Doctrine ORM (2.3 <= php-doctrine-orm < 3.0)
  * Symfony Web Profile Bundle (2.3 <= php-symfony-web-profiler-bundle < 4.0)
  * Twig (1.10 <= php-twig < 2.0)


pkgId: ff6fc93ff773ecfdc220086871511c0db36dd35c58c71606802caed90ea84bce
name: php-doctrine-doctrine-cache-bundle
arch: src
version: 1.0.1
epoch: 0
release: 3.fc23
summary: Symfony2 Bundle for Doctrine Cache
url: https://github.com/doctrine/DoctrineCacheBundle
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder18.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-doctrine-doctrine-cache-bundle-1.0.1-3.fc23.src.rpm
checksum_type: sha256
description:
  Symfony2 Bundle for Doctrine Cache.

  Optional:
  * Memcache (php-pecl-memcache)
  * Memcached (php-pecl-memcached)
  * Mongo (php-pecl-mongo)


pkgId: 83f6a723abab7df1cf5f427f9a868953a96c364e140197c16ef9b0bbf963ce09
name: php-doctrine-inflector
arch: src
version: 1.0.1
epoch: 0
release: 5.fc23
summary: Common string manipulations with regard to casing and singular/plural rules
url: https://github.com/doctrine/inflector
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-25.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-doctrine-inflector-1.0.1-5.fc23.src.rpm
checksum_type: sha256
description:
  Doctrine Inflector is a small library that can perform string manipulations
  with regard to upper-/lowercase and singular/plural forms of words.


pkgId: 71fb7d76ec767e7f06e6ee9c10aa0df80ac3ef4d8d3b1a61043c1d8dd73a6732
name: php-doctrine-lexer
arch: src
version: 1.0.1
epoch: 0
release: 5.fc23
summary: Base library for a lexer that can be used in top-down, recursive descent parsers
url: https://github.com/doctrine/lexer
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder16.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-doctrine-lexer-1.0.1-5.fc23.src.rpm
checksum_type: sha256
description:
  Base library for a lexer that can be used in top-down, recursive descent
  parsers.

  This lexer is used in Doctrine Annotations and in Doctrine ORM (DQL).


pkgId: 77f5e41e744a9abc3b909616fed16420bfb4eb5ffc4f072e2a9c94fe5183ecc4
name: php-doctrine-orm
arch: src
version: 2.4.7
epoch: 0
release: 2.fc23
summary: Doctrine Object-Relational-Mapper (ORM)
url: http://www.doctrine-project.org/projects/orm.html
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder03.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-doctrine-orm-2.4.7-2.fc23.src.rpm
checksum_type: sha256
description:
  Object relational mapper (ORM) for PHP that sits on top of a powerful database
  abstraction layer (DBAL). One of its' key features is the option to write
  database queries in a proprietary object oriented SQL dialect called Doctrine
  Query Language (DQL), inspired by Hibernate's HQL. This provides developers
  with a powerful alternative to SQL that maintains flexibility without requiring
  unnecessary code duplication.

  Optional caches (see Doctrine\ORM\Tools\Setup::createConfiguration()):
  * APC (php-pecl-apc)
  * Memcache (php-pecl-memcache)
  * Redis (php-pecl-redis)
  * XCache (php-xcache)


pkgId: 69f676e1e7fd93da9c7877c62c5795c3115befcff85aed8ca19e30d7719dd468
name: php-dropbox-php-Dropbox
arch: src
version: 1.0.0
epoch: 0
release: 7.fc23
summary: Library for integrating dropbox with PHP
url: http://www.dropbox-php.com/
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Unspecified
rpm_buildhost: buildvm-07.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-dropbox-php-Dropbox-1.0.0-7.fc23.src.rpm
checksum_type: sha256
description:
  This PHP library allows you to easily integrate dropbox with PHP.
  The library makes use of OAuth.

  Optional Dependencies:
  Zend framework: Zend_{Oauth,Json,Uri} for OAuth/Zend back-end
  Wordpress: WP_Http for OAuth/Wordpress back-end


pkgId: cab554c1d38f44ae3d89cebe8bfeef37c853d41913308a5732c63d5fcfb2b163
name: php-drush-drush
arch: src
version: 6.2.0
epoch: 0
release: 4.fc23
summary: Command line shell and Unix scripting interface for Drupal
url: http://www.drush.org
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder21.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-drush-drush-6.2.0-4.fc23.src.rpm
checksum_type: sha256
description:
  Drush is a command line shell and Unix scripting interface for Drupal.  If
  you are unfamiliar with shell scripting, reviewing the documentation for your
  shell (e.g. man bash) or reading an online tutorial (e.g. search for "bash
  tutorial") will help you get the most out of Drush.

  Drush core ships with lots of useful commands for interacting with code like
  modules/themes/profiles. Similarly, it runs update.php, executes sql queries
  and DB migrations, and misc utilities like run cron or clear cache.

  Works with Drupal 6, Drupal 7, and usually Drupal 8.

  NOTE: You must manually install your required database driver
        (ex: php-mysql, php-mysqli, php-pgsql)


pkgId: d66bc66ed6efe029e07242a256162987551c5eaccfa68987e8d6721e88c9ec2f
name: php-ezc-Archive
arch: src
version: 1.4.1
epoch: 0
release: 11.fc23
summary: A component for create, modify, and extract archive files of various formats
url: http://ezcomponents.org/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder19.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-ezc-Archive-1.4.1-11.fc23.src.rpm
checksum_type: sha256
description:
  The Archive component provides a generic API for creating and extracting
  archives. Currently, the Archive component supports the Tar and Zip formats.
  Compression algorithms, such as GZip or BZip2, are indirectly supported. The
  stream wrappers from PHP should be used to handle compressed archives.


pkgId: e949f6842e63df0ec479aa6275ee370935ff4f6ccbe832597f0c104da3587865
name: php-ezc-Authentication
arch: src
version: 1.3.1
epoch: 0
release: 10.fc23
summary: Support for different means of identification and authentication
url: http://ezcomponents.org/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder23.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-ezc-Authentication-1.3.1-10.fc23.src.rpm
checksum_type: sha256
description:
  The purpose of the Authentication component is to provide support for different
  means of identification and authentication of users using different providers
  and protocols.


pkgId: e27ebfef644df969ce72cc668df274ec5942b213c7a61f001792c80c575a432a
name: php-ezc-AuthenticationDatabaseTiein
arch: src
version: 1.1
epoch: 0
release: 10.fc23
summary: Provides a Database filter for the Authentication component
url: http://ezcomponents.org/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-09.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-ezc-AuthenticationDatabaseTiein-1.1-10.fc23.src.rpm
checksum_type: sha256
description:
  The purpose of the Authentication component is to provide support for different
  means of identification and authentication of users using different providers
  and protocols.

  AuthenticationDatabaseTiein provides a Database filter for the Authentication
  component by using the Database component, and an implementation of a database
  store (backend) for OpenID authentication.


pkgId: 418e669a6b5b87d32d4763fad6427b2936ecde41c800e736dc729f02f44d246e
name: php-ezc-Base
arch: src
version: 1.8
epoch: 0
release: 10.fc23
summary: Provides the basic infrastructure that all packages rely on
url: http://ezcomponents.org/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-03.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-ezc-Base-1.8-10.fc23.src.rpm
checksum_type: sha256
description:
  The Base package provides the basic infrastructure that all packages rely on.
  Therefore every component relies on this package.


pkgId: 3a4d6f74721465bfe3dbf031e9059ca70347cca5991e115816ea6e49439476dd
name: php-ezc-Cache
arch: src
version: 1.5
epoch: 0
release: 10.fc23
summary: Provides a collection of lightweight classes to cache different kinds of data
url: http://ezcomponents.org/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder10.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-ezc-Cache-1.5-10.fc23.src.rpm
checksum_type: sha256
description:
  The Cache package provides a collection of lightweight classes to cache
  different kinds of data. It provides a manager class, which takes care of
  instantiating and reusing caches.

  APC cache storage is available only if php-pecl-apc extension installed.


pkgId: e00a5db4532da35b7cb11061ed503b7c79c7b63f40452afa8df2ad3108d2f681
name: php-ezc-Configuration
arch: src
version: 1.3.5
epoch: 0
release: 10.fc23
summary: A component that allows you to use configuration files in different formats
url: http://ezcomponents.org/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-08.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-ezc-Configuration-1.3.5-10.fc23.src.rpm
checksum_type: sha256
description:
  The Configuration component allows you to read settings from configuration
  files. Those settings can come from any backend in theory, but currently there
  are two reader classes: ezcConfigurationIniReader  for reading plain
  configuration files and ezcConfigurationArrayReader for reading parsed
  configuration files in the form of a PHP array.

  The Configuration component also allows you to modify settings in configuration
  files and write those changes back to disk. There are two writer classes:
  ezcConfigurationIniWriter for writing plain configuration files and
  ezcConfigurationArrayWriter  for writing parsed configuration files in the form
  of a PHP array.


pkgId: cf15af85ccf945cc4991d8a2c67c24d558532795af216c63c4dfade99eae1c2f
name: php-ezc-ConsoleTools
arch: src
version: 1.6.1
epoch: 0
release: 10.fc23
summary: A set of classes to do different actions with the console
url: http://ezcomponents.org/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder05.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-ezc-ConsoleTools-1.6.1-10.fc23.src.rpm
checksum_type: sha256
description:
  The ConsoleTools component provides several useful tools to build applications
  that run on a computer console (sometimes also called shell or command line).


pkgId: 75a8c8ec8768dbd90b2fb3b60d530d2d2a839860510687f926627c96cd059ea3
name: php-ezc-Database
arch: src
version: 1.4.7
epoch: 0
release: 10.fc23
summary: A lightweight database layer on top of PHP's PDO
url: http://ezcomponents.org/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-12.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-ezc-Database-1.4.7-10.fc23.src.rpm
checksum_type: sha256
description:
  A lightweight database layer on top of PHP's PDO that allows you to utilize
  a database without having to take care of differences in SQL dialects.


pkgId: 4607adea97a9e0143d323ca51f05316443a248a384774a087f094cdaa4cb80d2
name: php-ezc-DatabaseSchema
arch: src
version: 1.4.4
epoch: 0
release: 10.fc23
summary: A set of classes that allow you to use information from a database schema
url: http://ezcomponents.org/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder13.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-ezc-DatabaseSchema-1.4.4-10.fc23.src.rpm
checksum_type: sha256
description:
  The DatabaseSchema component provides a unified data structure to describe
  relational databases. DatabaseSchema can read and write the structure from and
  to several databases (such as MySQL, SQLite and Oracle) and also read and write
  in two web language files (XML and PHP).

  The main intention of the component is to extract an already existing schema
  from a database, and compare it with either a predefined schema to check for
  any changes. Although the component does allow you to create the schema manually
  through the API, it is often easier to create the schema yourself in a database,
  and then extract the data from it.


pkgId: 5d6671837686ed12dd9ed2d9fd8f9074b99b55e40bed20e38943bdb6dec630ac
name: php-ezc-EventLogDatabaseTiein
arch: src
version: 1.0.2
epoch: 0
release: 10.fc23
summary: Contains the database writer backend for the EventLog component
url: http://ezcomponents.org/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder09.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-ezc-EventLogDatabaseTiein-1.0.2-10.fc23.src.rpm
checksum_type: sha256
description:
  The EventLogDatabaseTiein component provides an API to log events and audit
  trails using a database connection.

  ezcLogDatabaseWriter is the log writer that writes log messages to the database.

  To write log messages to the database, the Database component is used. The table
  to which the log is written should already exist.


pkgId: 957c29993cd52691866d7fce47e111e9b55a9a4bc91df5373da4b7b221caaffa
name: php-ezc-Feed
arch: src
version: 1.3
epoch: 0
release: 10.fc23
summary: This component handles parsing and creating RSS1, RSS2 and ATOM feeds
url: http://ezcomponents.org/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder21.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-ezc-Feed-1.3-10.fc23.src.rpm
checksum_type: sha256
description:
  This component handles parsing and creating RSS1, RSS2 and ATOM feeds, with
  support for different feed modules (dc, content, creativeCommons, geo, iTunes).


pkgId: 090dd4e87cf9dc96cf45a40f1d64f86dfa84664796e512d0fa6c74f13b0b4915
name: php-ezc-Graph
arch: src
version: 1.5
epoch: 0
release: 11.fc23
summary: A component for creating pie charts, line graphs and other kinds of diagrams
url: http://ezcomponents.org/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-17.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-ezc-Graph-1.5-11.fc23.src.rpm
checksum_type: sha256
description:
  The Graph component enables you to create line, pie and bar charts.
  The output driver mechanism allows you to create different image types
  from each chart, and the available renderers make the chart output
  customizable from simple two-dimensional charts to beautiful
  three-dimensional data projections.


pkgId: b446cd98cf6583b145aba70c1e173096d0ae6bf0b59191e078448bdc11d085cd
name: php-ezc-Mail
arch: src
version: 1.7.1
epoch: 0
release: 10.fc23
summary: A component construct and/or parse Mail messages conforming to the mail standard
url: http://ezcomponents.org/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-22.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-ezc-Mail-1.7.1-10.fc23.src.rpm
checksum_type: sha256
description:
  The Mail component provides functionality to send, retrieve and parse mail
  messages. If you require an easy way to send a mail, use the ezcMailComposer
  class, which allows you to send HTML mails with images, attachments and an
  optional text part. If you require more advanced mail messages, you can build
  the complete message yourself using the ezcMailPart  derived classes. You can
  retrieve mail messages from different sources using the supported transports.


pkgId: 30d2ee281e05e2030d936aafdfcd4d76811b61b97efb68f3174eabba5a42d22c
name: php-ezc-PersistentObject
arch: src
version: 1.7.1
epoch: 0
release: 10.fc23
summary: A component for store an arbitrary data structures to a fixed database table
url: http://ezcomponents.org/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-18.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-ezc-PersistentObject-1.7.1-10.fc23.src.rpm
checksum_type: sha256
description:
  The PersistentObject component provides object persistence for PHP 5 using a
  database. PersistentObject uses the Database component to provide database
  abstraction. It does not rely on code generation and does not force a specific
  inheritance structure to work.


pkgId: 829704d8afecd39bc311aab8410196237f1aa348240476f91c76d30d94d65528
name: php-ezc-PersistentObjectDatabaseSchemaTiein
arch: src
version: 1.3
epoch: 0
release: 10.fc23
summary: Automatic generation of PersistentObject from DatabaseSchema definitions
url: http://ezcomponents.org/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder16.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-ezc-PersistentObjectDatabaseSchemaTiein-1.3-10.fc23.src.rpm
checksum_type: sha256
description:
  The PersistentObjectDatabaseSchemaTiein component allows you to generate
  template PersistentObject definition files and php classes from a database
  structure or a DatabaseSchema schema file. You will most likely have to adjust
  the PersistentObject definitions afterwards.


pkgId: d2185913cd85e9e4d26d74038b67fcd538dc9e7f4cd637ba81b30c370b20e5da
name: php-ezc-SystemInformation
arch: src
version: 1.0.8
epoch: 0
release: 10.fc23
summary: Provides access to common system variables
url: http://ezcomponents.org/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-22.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-ezc-SystemInformation-1.0.8-10.fc23.src.rpm
checksum_type: sha256
description:
  Provides access to common system variables, such as CPU type and speed, and the
  available amount of memory.


pkgId: 41380f0bdb57bf250759e4ff493ec20d1ba882d08f32250681b644dd03b120c4
name: php-ezc-Template
arch: src
version: 1.4.2
epoch: 0
release: 10.fc23
summary: A fully functional Templating system
url: http://ezcomponents.org/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-06.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-ezc-Template-1.4.2-10.fc23.src.rpm
checksum_type: sha256
description:
  The template component provides a manageable way to separate application logic
  from presentation data. The application logic is the PHP code of your
  application, including the call to the Template component. Presentation data
  are the template files.

  The separation of application logic and presentation data is easier to maintain
  and allows different people to work on separate parts. Another advantage is
  that the Template language is more suitable for non programmers and web
  designers. The language is designed to be easier to use and contains
  more expressive constructs for repetitive tasks in the presentation data.


pkgId: ce85a32350c890d7e4c13ce5541f6198d30f5b7a1ab396ff598ea9059ad8e842
name: php-ezc-Webdav
arch: src
version: 1.1.4
epoch: 0
release: 10.fc23
summary: Set up and run your own WebDAV server
url: http://ezcomponents.org/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-14.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-ezc-Webdav-1.1.4-10.fc23.src.rpm
checksum_type: sha256
description:
  The Webdav component enables you to easily set up a WebDAV-enabled HTTP server.
  Users can then create and edit site content by uploading and downloading files
  to and from their desktop. The current implementation is compatible with
  RFC 2518 and realizes most parts of the changes defined in RFC 4918. It also
  supports clients that do not conform to the standard and provides an interface
  to support these clients.

  The component is intended to support you by providing access to your data
  through the HTTP 1.1 protocol. The data can be stored in the file system, or
  any other custom data storage. It is then served as a virtual directory tree to
  the user.


pkgId: 02e8a3b247a40d1e85ad8de96de52e503fc5be6325a0d4ccbc8ca6f70def462f
name: php-facedetect
arch: src
version: 1.0.1
epoch: 0
release: 14.fc23
summary: PHP extension to access the OpenCV library
url: http://www.xarg.org/project/php-facedetect/
rpm_license: PHP
rpm_vendor: Fedora Project
rpm_group: Development/Languages
rpm_buildhost: arm02-builder10.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-facedetect-1.0.1-14.fc23.src.rpm
checksum_type: sha256
description:
  This extension provides a PHP implementation of the OpenCV library.
  The extension offers two new functions. In principle, they differ
  only by their return value. The first returns only the number of
  faces found on the given image and the other an associative array
  of their coordinates.


pkgId: 47db6a4c1a4f139409f47d1f363c0dd117d68bab9c98eafc48a3ed04fe342e9d
name: php-feedcreator
arch: src
version: 1.7.2
epoch: 0
release: 11.fc23
summary: Create RSS feeds
url: http://www.bitfolge.de/rsscreator-en.html
rpm_license: LGPLv2
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-10.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-feedcreator-1.7.2-11.fc23.src.rpm
checksum_type: sha256
description:
  FeedCreator.class.php provides an easy way to create RSS feeds from within PHP
  using ease to use classes.


pkgId: 2076be3b28c17b5170b97144e51d1fdf51dc043e489277a30c210c12283e0609
name: php-firephp-firephp-core
arch: src
version: 0.4.0
epoch: 0
release: 1.fc23
summary: Traditional FirePHPCore library for sending PHP variables to the browser
url: https://github.com/firephp/firephp-core
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-08.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-firephp-firephp-core-0.4.0-1.fc23.src.rpm
checksum_type: sha256
description:
  FirePHP is an advanced logging system that can display PHP variables in the
  browser as an application is navigated. All communication is out of band to
  the application meaning that the logging data will not interfere with the
  normal functioning of the application.


pkgId: 4ba2f241c0a0a6e951d6e61bf698354a037d821b7bc0401f30b4e0446f0654da
name: php-fpdf
arch: src
version: 1.6
epoch: 0
release: 11.fc23
summary: PHP class to generate PDF Files
url: http://www.fpdf.org
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder17.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-fpdf-1.6-11.fc23.src.rpm
checksum_type: sha256
description:
  FPDF is a PHP class which allows to generate PDF files with pure PHP, that is
  to say without using the PDFlib library. F from FPDF stands for Free: you may
  use it for any kind of usage and modify it to suit your needs.


pkgId: e2910923e0d95c51203b532771b77e628c20a8ca710828f9e44c915b3dbf5637
name: php-geshi
arch: src
version: 1.0.8.11
epoch: 0
release: 6.fc23
summary: Generic syntax highlighter
url: http://qbnz.com/highlighter/
rpm_license: GPLv2+
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-03.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-geshi-1.0.8.11-6.fc23.src.rpm
checksum_type: sha256
description:
  GeSHi aims to be a simple but powerful highlighting class, with the following
  goals:
      * Support for a wide range of popular languages
      * Easy to add a new language for highlighting
      * Highly customisable output formats


pkgId: ffd7aaa4eb2345a274a6bd2f9d59cea93011db23ceb82340fe92f1eb1cb602d2
name: php-getid3
arch: src
version: 1.9.8
epoch: 1
release: 3.fc23
summary: The PHP media file parser
url: http://getid3.sourceforge.net/
rpm_license: LGPLv3+
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-15.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-getid3-1.9.8-3.fc23.src.rpm
checksum_type: sha256
description:
  getID3() is a PHP script that extracts useful information
  (such as ID3 tags, bitrate, playtime, etc.) from MP3s &
  other multimedia file formats (Ogg, WMA, WMV, ASF, WAV, AVI,
  AAC, VQF, FLAC, MusePack, Real, QuickTime, Monkey's Audio, MIDI and more).


pkgId: 7601d2e43a47927472a5b5b74fb881e7da6717d32d70e9d61b13d4041047d11a
name: php-gitter
arch: src
version: 0.3.0
epoch: 0
release: 5.fc23
summary: Object oriented interaction with Git repositories
url: https://github.com/klaussilveira/gitter
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-06.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-gitter-0.3.0-5.fc23.src.rpm
checksum_type: sha256
description:
  Gitter allows you to interact in an object oriented manner with Git repositories
  via PHP. The main goal of the library is not to replace the system git command,
  but provide a coherent, stable and performatic object oriented interface.

  Most commands are sent to the system's git command, parsed and then interpreted
  by Gitter. Everything is transparent to you, so you don't have to worry about a
  thing.


pkgId: 9606b6ac0cc01cf570484ba64ec9e479b314009d83b144b2a1a44b558beeddfb
name: php-gliph
arch: src
version: 0.1.8
epoch: 0
release: 4.fc23
summary: A graph library for PHP
url: https://github.com/sdboyer/gliph
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-12.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-gliph-0.1.8-4.fc23.src.rpm
checksum_type: sha256
description:
  Gliph is a graph library for PHP. It provides graph building blocks and
  data structures for use by other PHP applications. It is (currently) designed
  for use with in-memory graphs, not for interaction with a graph database like
  Neo4J (http://neo4j.org/).


pkgId: 891560840963d2365ce3496b5a36d2a1e2bb37bba4a76e2c2322c7e2cba7f042
name: php-google-apiclient
arch: src
version: 1.1.4
epoch: 0
release: 2.fc23
summary: Client library for Google APIs
url: https://developers.google.com/api-client-library/php/
rpm_license: ASL 2.0
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm04-builder08.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-google-apiclient-1.1.4-2.fc23.src.rpm
checksum_type: sha256
description:
  Google APIs Client Library for PHP provides access to many Google APIs.
  It is designed for PHP client-application developers and offers simple,
  flexible, powerful API access.

  Optional:
  * php-pecl-apcu
  * php-pecl-memcache
  * php-pecl-memcached

  Examples are available in the php-google-apiclient-examples package.


pkgId: b1a2ee15bf11520cc3d668dcd8f50ff7bdacbc4b99c53a752b4995cc59a5a345
name: php-goutte
arch: src
version: 1.0.6
epoch: 0
release: 3.fc23
summary: A simple PHP web scraper
url: https://github.com/fabpot/Goutte
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder09.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-goutte-1.0.6-3.fc23.src.rpm
checksum_type: sha256
description:
  Goutte is a screen scraping and web crawling library for PHP.

  Goutte provides a nice API to crawl websites and extract data
  from the HTML/XML responses.


pkgId: 4035e02be9687db7e0308d53e620f1523b99148927ebb251c327dac3cc5aed9d
name: php-guzzle-Guzzle
arch: src
version: 3.9.3
epoch: 0
release: 5.fc23
summary: PHP HTTP client library and framework for building RESTful web service clients
url: https://github.com/guzzle/guzzle3
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-03.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-guzzle-Guzzle-3.9.3-5.fc23.src.rpm
checksum_type: sha256
description:
  Guzzle takes the pain out of sending HTTP requests and the redundancy out
  of creating web service clients.

  Guzzle is a framework that includes the tools needed to create a robust web
  service client, including: Service descriptions for defining the inputs and
  outputs of an API, resource iterators for traversing paginated resources,
  batching for sending a large number of requests as efficiently as possible.

  * All the power of cURL with a simple interface
  * Persistent connections and parallel requests
  * Streams request and response bodies
  * Service descriptions for quickly building clients
  * Powered by the Symfony2 EventDispatcher
  * Use all of the code or only specific components
  * Plugins for caching, logging, OAuth, mocks, and more

  Optional dependencies:
  * Doctrine Cache (1.3 <= php-doctrine-cache < 2.0)
  * Monolog (1.0 <= php-Monolog < 2.0)
  * Zend Framework 2 Cache (2.0 <= php-ZendFramework2-Cache < 3)
  * Zend Framework 2 Log (2.0 <= php-ZendFramework2-Log < 3)

  ***** EOL NOTICE *****

  This package is for Guzzle 3.x. Guzzle 5.x+, the new versions of Guzzle, has
  been released and is available as the package "php-guzzlehttp-guzzle". The
  documentation for Guzzle version 5+ can be found at http://guzzlephp.org.

  Guzzle 3 is only maintained for bug and security fixes. Guzzle 3 will be EOL at
  some point in late 2015.

  **********************


pkgId: 1d6f1ce4e12ca903420cb5215cfdac0093a4d9e31cec727ec66af21ad5d7d643
name: php-guzzlehttp-guzzle
arch: src
version: 5.3.0
epoch: 0
release: 4.fc23
summary: PHP HTTP client and webservice framework
url: http://guzzlephp.org
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-23.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-guzzlehttp-guzzle-5.3.0-4.fc23.src.rpm
checksum_type: sha256
description:
  Guzzle is a PHP HTTP client that makes it easy to work with HTTP/1.1 and takes
  the pain out of consuming web services.

  * Pluggable HTTP adapters that can send requests serially or in parallel
  * Doesn't require cURL, but uses cURL by default
  * Streams data for both uploads and downloads
  * Provides event hooks & plugins for cookies, caching, logging, OAuth, mocks,
    etc
  * Keep-Alive & connection pooling
  * SSL Verification
  * Automatic decompression of response bodies
  * Streaming multipart file uploads
  * Connection timeouts


pkgId: 903e9b11ab2ea714760d82bba53f2c1e34833bce25c9037b14f9ac4a7d0dc9bd
name: php-guzzlehttp-promises
arch: src
version: 1.0.2
epoch: 0
release: 1.fc23
summary: Guzzle promises library
url: https://github.com/guzzle/promises
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-02.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-guzzlehttp-promises-1.0.2-1.fc23.src.rpm
checksum_type: sha256
description:
  Promises/A+ [1] implementation that handles promise chaining and resolution
  interactively, allowing for "infinite" promise chaining while keeping the
  stack size constant.

  [1] https://promisesaplus.com/


pkgId: 18ea2f1aad67fbf798bff603487751e47ddc74bd7af25df05f6142be1160df12
name: php-guzzlehttp-psr7
arch: src
version: 1.2.0
epoch: 0
release: 1.fc23
summary: PSR-7 message implementation
url: https://github.com/guzzle/psr7
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-08.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-guzzlehttp-psr7-1.2.0-1.fc23.src.rpm
checksum_type: sha256
description:
  PSR-7 message implementation, several stream decorators, and some helpful
  functionality like query string parsing.


pkgId: 4dd57547a2b1da8b96f3b825661acad23412710e26765933b1839a87e37a20ed
name: php-guzzlehttp-ringphp
arch: src
version: 1.1.0
epoch: 0
release: 6.fc23
summary: Simple handler system used to power clients and servers in PHP
url: http://ringphp.readthedocs.org
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildhw-12.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-guzzlehttp-ringphp-1.1.0-6.fc23.src.rpm
checksum_type: sha256
description:
  Provides low level APIs used to power HTTP clients and servers through a simple,
  PHP callable that accepts a request hash and returns a future response hash.
  RingPHP supports both synchronous and asynchronous workflows by utilizing both
  futures and promises [1].

  RingPHP is inspired by Clojure's Ring [2], but has been modified to accommodate
  clients and servers for both blocking and non-blocking requests.

  [1] https://github.com/reactphp/promise
  [2] https://github.com/ring-clojure/ring


pkgId: 29ae12a8cfb53577a046db25f2a7eae5b5470510e2515f547316cfcbead7f076
name: php-hkit
arch: src
version: 0.5
epoch: 0
release: 11.fc23
summary: Simple PHP5 API for extracting common microformats from a page
url: http://allinthehead.com/hkit
rpm_license: LGPLv2+
rpm_vendor: Fedora Project
rpm_group: System Environment/Libraries
rpm_buildhost: arm02-builder19.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-hkit-0.5-11.fc23.src.rpm
checksum_type: sha256
description:
    hKit is a simple toolkit for extracting common microformats from a page.
  The page can be presented as a string or a URL, and the result is handed
  back as a standard PHP array structure. hKit uses SimpleXML for parsing,
  and therefore requires PHP5.
    Designed for humans first and machines second, microformats are a set of
  simple, open data formats built upon existing and widely adopted standards.
    The only microformat module currently supported by hKit is hCard. However,
  hKit makes possible for a user to write its own microformat module.


pkgId: 6407c0951f489a1950b989b0d3f3110aa592025434865e23fcf1fe15aa3cbb8b
name: php-horde-Horde-Alarm
arch: src
version: 2.2.5
epoch: 0
release: 1.fc23
summary: Horde Alarm Libraries
url: http://pear.horde.org
rpm_license: LGPLv2
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-09.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-horde-Horde-Alarm-2.2.5-1.fc23.src.rpm
checksum_type: sha256
description:
  An interface to deal with reminders, alarms and notifications through a
  standardized API. The following notification methods are currently
  available: standard Horde notifications, pop-ups, emails.


pkgId: 4cae6c94759c5adf19541eb935b83fa943a4b6b31a567ec3ce2fc52e9bcb95eb
name: php-horde-Horde-Argv
arch: src
version: 2.0.11
epoch: 0
release: 2.fc23
summary: Horde command-line argument parsing package
url: http://pear.horde.org
rpm_license: BSD and LGPLv2
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-07.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-horde-Horde-Argv-2.0.11-2.fc23.src.rpm
checksum_type: sha256
description:
  Classes for parsing command line arguments with various actions, providing
  help, grouping options, and more.


pkgId: 9d9fdf0d18b481408b3e64a1d6731dd3329c9ec45b393ec8e817057d2af17869
name: php-horde-Horde-Auth
arch: src
version: 2.1.10
epoch: 0
release: 1.fc23
summary: Horde Authentication API
url: http://pear.horde.org
rpm_license: LGPLv2
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: arm02-builder13.arm.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-horde-Horde-Auth-2.1.10-1.fc23.src.rpm
checksum_type: sha256
description:
  The Horde_Auth package provides a common interface into the various
  backends for the Horde authentication system.


pkgId: b00d02b1b9ad28643a6389d19fb3b469d1f5684429ff97bfaded68ed01410942
name: php-horde-Horde-Browser
arch: src
version: 2.0.10
epoch: 0
release: 1.fc23
summary: Horde Browser API
url: http://pear.horde.org
rpm_license: LGPLv2+
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-16.phx2.fedoraproject.org
rpm_packager: Fedora Project
location_href: p/php-horde-Horde-Browser-2.0.10-1.fc23.src.rpm
checksum_type: sha256
description:
  The Horde_Browser class provides an API for getting information about the
  current user's browser and its capabilities.


