OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119648K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72608K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped riscv,cpu_intc,2: 64 local interrupts mapped riscv,cpu_intc,3: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 4/8 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 4 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 1024 (order: 4, 65536 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 13, base_baud = 230400) is a 16550A OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: console=ttyS0 ro root=/dev/vda init=/init Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119648K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72608K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped riscv,cpu_intc,2: 64 local interrupts mapped riscv,cpu_intc,3: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1 Call Trace: [< (ptrval)>] walk_stackframe+0x0/0xa2 [< (ptrval)>] show_stack+0x26/0x34 [< (ptrval)>] dump_stack+0x5e/0x7c [< (ptrval)>] __warn+0xc6/0xdc [< (ptrval)>] warn_slowpath_null+0x2c/0x3e [< (ptrval)>] riscv_irq_enable+0x8e/0x94 [< (ptrval)>] irq_enable+0x3a/0x6a [< (ptrval)>] __irq_startup+0x80/0x88 [< (ptrval)>] irq_startup+0x4e/0xe2 [< (ptrval)>] irq_activate_and_startup+0x1c/0x28 [< (ptrval)>] __irq_do_set_handler+0x6e/0x134 [< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a [< (ptrval)>] plic_init+0x216/0x34a [< (ptrval)>] of_irq_init+0x132/0x232 [< (ptrval)>] irqchip_init+0x10/0x1c [< (ptrval)>] init_IRQ+0x8/0x14 [< (ptrval)>] start_kernel+0x1f6/0x32c [< (ptrval)>] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace 3f245499100bcdd5 ]--- riscv,plic0,c000000: mapped 10 interrupts to 4/8 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 4 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 1024 (order: 4, 65536 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console [ttyS0] disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 13, base_baud = 230400) is a 16550A console [ttyS0] enabled console [ttyS0] enabled [drm] radeon kernel modesetting enabled. [drm] radeon kernel modesetting enabled. loop: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbhid: USB HID core driver NET: Registered protocol family 10 NET: Registered protocol family 10 Segment Routing with IPv6 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 17 Key type dns_resolver registered Key type dns_resolver registered bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] uses init memory and must be disabled even before the real one is ready bootconsole [early0] disabled bootconsole [early0] disabled Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): INFO: recovery required on readonly filesystem EXT4-fs (vda): write access will be enabled during recovery EXT4-fs (vda): recovery complete EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. EXT4-fs (vda): re-mounted. Opts: (null) Sun Feb 18 11:58:00 UTC 2018 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff inet 10.0.2.15/24 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe12:3456/64 scope link tentative valid_lft forever preferred_lft forever 3: sit0@NONE: mtu 1480 qdisc noop state DOWN group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 default via 10.0.2.2 dev eth0 10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15 Welcome to the Fedora/RISC-V stage4 builder + set -e + exec + rm -rf /rpmbuild + mkdir -p /rpmbuild + rpmbuild --rebuild /var/tmp/dar-2.5.5-1.fc25.src.rpm --define 'debug_package %{nil}' --undefine _annotated_build --define '_topdir /rpmbuild' --define '_missing_doc_files_terminate_build %{nil}' --define '_unitdir /usr/lib/systemd/system' --define '_sysctldir /usr/lib/sysctl.d' --define '_tmpfilesdir /usr/lib/tmpfiles.d' --define '_udevrulesdir /usr/lib/udev/rules.d' --define '_emacs_sitestartdir /usr/share/emacs/site-lisp/site-start.d' --define '_emacs_sitelispdir /usr/share/emacs/site-lisp' --nocheck Installing /var/tmp/dar-2.5.5-1.fc25.src.rpm Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.GVN3ya + umask 022 + cd /rpmbuild/BUILD + cd /rpmbuild/BUILD + rm -rf dar-2.5.5 + /usr/bin/gzip -dc /rpmbuild/SOURCES/dar-2.5.5.tar.gz + /usr/bin/tar -xof - + STATUS=0 + '[' 0 -ne 0 ']' + cd dar-2.5.5 + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.TWF4QX + umask 022 + cd /rpmbuild/BUILD + cd dar-2.5.5 + STATIC='--disable-dar-static --disable-static' + CFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 ' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 ' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I/usr/lib64/gfortran/modules' + export FFLAGS + FCFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -I/usr/lib64/gfortran/modules' + export FCFLAGS + LDFLAGS='-Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' + export LDFLAGS + '[' 1 = 1 ']' +++ dirname ./configure ++ find . -name config.guess -o -name config.sub + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./config.guess + '[' -f /usr/lib/rpm/redhat/config.guess ']' + /usr/bin/rm -f ./config.guess ++ basename ./config.guess + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.guess ./config.guess '/usr/lib/rpm/redhat/config.guess' -> './config.guess' + for i in $(find $(dirname ./configure) -name config.guess -o -name config.sub) ++ basename ./config.sub + '[' -f /usr/lib/rpm/redhat/config.sub ']' + /usr/bin/rm -f ./config.sub ++ basename ./config.sub + /usr/bin/cp -fv /usr/lib/rpm/redhat/config.sub ./config.sub '/usr/lib/rpm/redhat/config.sub' -> './config.sub' + '[' 1 = 1 ']' + '[' x '!=' x-specs=/usr/lib/rpm/redhat/redhat-hardened-ld ']' ++ find . -name ltmain.sh + for i in $(find . -name ltmain.sh) + /usr/bin/sed -i.backup -e 's~compiler_flags=$~compiler_flags="-specs=/usr/lib/rpm/redhat/redhat-hardened-ld"~' ./ltmain.sh + ./configure --build=riscv64-redhat-linux-gnu --host=riscv64-redhat-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-build-html --disable-dar-static --disable-static checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for a sed that does not truncate output... /usr/bin/sed checking whether NLS is requested... yes checking for msgfmt... no checking for gmsgfmt... : checking for xgettext... no checking for msgmerge... no checking for style of include used by make... GNU checking for riscv64-redhat-linux-gnu-gcc... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... none checking build system type... riscv64-redhat-linux-gnu checking host system type... riscv64-redhat-linux-gnu checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... done checking for riscv64-redhat-linux-gnu-g++... no checking for riscv64-redhat-linux-gnu-c++... no checking for riscv64-redhat-linux-gnu-gpp... no checking for riscv64-redhat-linux-gnu-aCC... no checking for riscv64-redhat-linux-gnu-CC... no checking for riscv64-redhat-linux-gnu-cxx... no checking for riscv64-redhat-linux-gnu-cc++... no checking for riscv64-redhat-linux-gnu-cl.exe... no checking for riscv64-redhat-linux-gnu-FCC... no checking for riscv64-redhat-linux-gnu-KCC... no checking for riscv64-redhat-linux-gnu-RCC... no checking for riscv64-redhat-linux-gnu-xlC_r... no checking for riscv64-redhat-linux-gnu-xlC... no checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... none checking how to run the C++ preprocessor... g++ -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for CFPreferencesCopyAppValue... no checking for CFLocaleCopyCurrent... no checking for GNU gettext in libc... yes checking whether to use NLS... yes checking where the gettext function comes from... libc checking for iconv... no, consider installing GNU libiconv checking whether we are using the GNU C++ compiler... (cached) yes checking whether g++ accepts -g... (cached) yes checking dependency style of g++... (cached) none checking for riscv64-redhat-linux-gnu-gcc... gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking dependency style of gcc... (cached) none checking how to print strings... printf checking for a sed that does not truncate output... (cached) /usr/bin/sed checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking how to convert riscv64-redhat-linux-gnu file names to riscv64-redhat-linux-gnu format... func_convert_file_noop checking how to convert riscv64-redhat-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for riscv64-redhat-linux-gnu-objdump... no checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for riscv64-redhat-linux-gnu-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for riscv64-redhat-linux-gnu-ar... no checking for ar... ar checking for archiver @FILE support... @ checking for riscv64-redhat-linux-gnu-strip... no checking for strip... strip checking for riscv64-redhat-linux-gnu-ranlib... no checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for riscv64-redhat-linux-gnu-mt... no checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... random: crng init done yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking how to run the C++ preprocessor... g++ -E checking for ld used by g++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC -DPIC checking if g++ PIC flag -fPIC -DPIC works... yes checking if g++ static flag -static works... no checking if g++ supports -c -o file.o... yes checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether make sets $(MAKE)... (cached) yes checking for riscv64-redhat-linux-gnu-ranlib... ranlib checking for C++ compiler usability... ok checking for socket in -lsocket... no checking for endnetconfig in -lnsl... no checking for cap_get_proc in -lcap... no checking for dlsym in -ldl... yes checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for ANSI C header files... (cached) yes checking for sys/wait.h that is POSIX.1 compatible... yes checking fcntl.h usability... no checking fcntl.h presence... yes configure: WARNING: fcntl.h: present but cannot be compiled configure: WARNING: fcntl.h: check for missing prerequisite headers? configure: WARNING: fcntl.h: see the Autoconf documentation configure: WARNING: fcntl.h: section "Present But Cannot Be Compiled" configure: WARNING: fcntl.h: proceeding with the compiler's result configure: WARNING: ## ------------------------------------------------------------------------- ## configure: WARNING: ## Report this to http://sourceforge.net/tracker/?group_id=65612&atid=511612 ## configure: WARNING: ## ------------------------------------------------------------------------- ## checking for fcntl.h... no checking netinet/in.h usability... no checking netinet/in.h presence... yes configure: WARNING: netinet/in.h: present but cannot be compiled configure: WARNING: netinet/in.h: check for missing prerequisite headers? configure: WARNING: netinet/in.h: see the Autoconf documentation configure: WARNING: netinet/in.h: section "Present But Cannot Be Compiled" configure: WARNING: netinet/in.h: proceeding with the compiler's result configure: WARNING: ## ------------------------------------------------------------------------- ## configure: WARNING: ## Report this to http://sourceforge.net/tracker/?group_id=65612&atid=511612 ## configure: WARNING: ## ------------------------------------------------------------------------- ## checking for netinet/in.h... no checking arpa/inet.h usability... no checking arpa/inet.h presence... yes configure: WARNING: arpa/inet.h: present but cannot be compiled configure: WARNING: arpa/inet.h: check for missing prerequisite headers? configure: WARNING: arpa/inet.h: see the Autoconf documentation configure: WARNING: arpa/inet.h: section "Present But Cannot Be Compiled" configure: WARNING: arpa/inet.h: proceeding with the compiler's result configure: WARNING: ## ------------------------------------------------------------------------- ## configure: WARNING: ## Report this to http://sourceforge.net/tracker/?group_id=65612&atid=511612 ## configure: WARNING: ## ------------------------------------------------------------------------- ## checking for arpa/inet.h... no checking for stdint.h... (cached) yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking sys/ioctl.h usability... no checking sys/ioctl.h presence... yes configure: WARNING: sys/ioctl.h: present but cannot be compiled configure: WARNING: sys/ioctl.h: check for missing prerequisite headers? configure: WARNING: sys/ioctl.h: see the Autoconf documentation configure: WARNING: sys/ioctl.h: section "Present But Cannot Be Compiled" configure: WARNING: sys/ioctl.h: proceeding with the compiler's result configure: WARNING: ## ------------------------------------------------------------------------- ## configure: WARNING: ## Report this to http://sourceforge.net/tracker/?group_id=65612&atid=511612 ## configure: WARNING: ## ------------------------------------------------------------------------- ## checking for sys/ioctl.h... no checking sys/socket.h usability... no checking sys/socket.h presence... yes configure: WARNING: sys/socket.h: present but cannot be compiled configure: WARNING: sys/socket.h: check for missing prerequisite headers? configure: WARNING: sys/socket.h: see the Autoconf documentation configure: WARNING: sys/socket.h: section "Present But Cannot Be Compiled" configure: WARNING: sys/socket.h: proceeding with the compiler's result configure: WARNING: ## ------------------------------------------------------------------------- ## configure: WARNING: ## Report this to http://sourceforge.net/tracker/?group_id=65612&atid=511612 ## configure: WARNING: ## ------------------------------------------------------------------------- ## checking for sys/socket.h... no checking termios.h usability... no checking termios.h presence... yes configure: WARNING: termios.h: present but cannot be compiled configure: WARNING: termios.h: check for missing prerequisite headers? configure: WARNING: termios.h: see the Autoconf documentation configure: WARNING: termios.h: section "Present But Cannot Be Compiled" configure: WARNING: termios.h: proceeding with the compiler's result configure: WARNING: ## ------------------------------------------------------------------------- ## configure: WARNING: ## Report this to http://sourceforge.net/tracker/?group_id=65612&atid=511612 ## configure: WARNING: ## ------------------------------------------------------------------------- ## checking for termios.h... no checking for unistd.h... (cached) yes checking utime.h usability... no checking utime.h presence... yes configure: WARNING: utime.h: present but cannot be compiled configure: WARNING: utime.h: check for missing prerequisite headers? configure: WARNING: utime.h: see the Autoconf documentation configure: WARNING: utime.h: section "Present But Cannot Be Compiled" configure: WARNING: utime.h: proceeding with the compiler's result configure: WARNING: ## ------------------------------------------------------------------------- ## configure: WARNING: ## Report this to http://sourceforge.net/tracker/?group_id=65612&atid=511612 ## configure: WARNING: ## ------------------------------------------------------------------------- ## checking for utime.h... no checking for sys/types.h... (cached) yes checking signal.h usability... no checking signal.h presence... yes configure: WARNING: signal.h: present but cannot be compiled configure: WARNING: signal.h: check for missing prerequisite headers? configure: WARNING: signal.h: see the Autoconf documentation configure: WARNING: signal.h: section "Present But Cannot Be Compiled" configure: WARNING: signal.h: proceeding with the compiler's result configure: WARNING: ## ------------------------------------------------------------------------- ## configure: WARNING: ## Report this to http://sourceforge.net/tracker/?group_id=65612&atid=511612 ## configure: WARNING: ## ------------------------------------------------------------------------- ## checking for signal.h... no checking errno.h usability... no checking errno.h presence... yes configure: WARNING: errno.h: present but cannot be compiled configure: WARNING: errno.h: check for missing prerequisite headers? configure: WARNING: errno.h: see the Autoconf documentation configure: WARNING: errno.h: section "Present But Cannot Be Compiled" configure: WARNING: errno.h: proceeding with the compiler's result configure: WARNING: ## ------------------------------------------------------------------------- ## configure: WARNING: ## Report this to http://sourceforge.net/tracker/?group_id=65612&atid=511612 ## configure: WARNING: ## ------------------------------------------------------------------------- ## checking for errno.h... no checking sys/un.h usability... no checking sys/un.h presence... yes configure: WARNING: sys/un.h: present but cannot be compiled configure: WARNING: sys/un.h: check for missing prerequisite headers? configure: WARNING: sys/un.h: see the Autoconf documentation configure: WARNING: sys/un.h: section "Present But Cannot Be Compiled" configure: WARNING: sys/un.h: proceeding with the compiler's result configure: WARNING: ## ------------------------------------------------------------------------- ## configure: WARNING: ## Report this to http://sourceforge.net/tracker/?group_id=65612&atid=511612 ## configure: WARNING: ## ------------------------------------------------------------------------- ## checking for sys/un.h... no checking for sys/stat.h... (cached) yes checking time.h usability... no checking time.h presence... yes configure: WARNING: time.h: present but cannot be compiled configure: WARNING: time.h: check for missing prerequisite headers? configure: WARNING: time.h: see the Autoconf documentation configure: WARNING: time.h: section "Present But Cannot Be Compiled" configure: WARNING: time.h: proceeding with the compiler's result configure: WARNING: ## ------------------------------------------------------------------------- ## configure: WARNING: ## Report this to http://sourceforge.net/tracker/?group_id=65612&atid=511612 ## configure: WARNING: ## ------------------------------------------------------------------------- ## checking for time.h... no checking fnmatch.h usability... no checking fnmatch.h presence... yes configure: WARNING: fnmatch.h: present but cannot be compiled configure: WARNING: fnmatch.h: check for missing prerequisite headers? configure: WARNING: fnmatch.h: see the Autoconf documentation configure: WARNING: fnmatch.h: section "Present But Cannot Be Compiled" configure: WARNING: fnmatch.h: proceeding with the compiler's result configure: WARNING: ## ------------------------------------------------------------------------- ## configure: WARNING: ## Report this to http://sourceforge.net/tracker/?group_id=65612&atid=511612 ## configure: WARNING: ## ------------------------------------------------------------------------- ## checking for fnmatch.h... no checking regex.h usability... no checking regex.h presence... yes configure: WARNING: regex.h: present but cannot be compiled configure: WARNING: regex.h: check for missing prerequisite headers? configure: WARNING: regex.h: see the Autoconf documentation configure: WARNING: regex.h: section "Present But Cannot Be Compiled" configure: WARNING: regex.h: proceeding with the compiler's result configure: WARNING: ## ------------------------------------------------------------------------- ## configure: WARNING: ## Report this to http://sourceforge.net/tracker/?group_id=65612&atid=511612 ## configure: WARNING: ## ------------------------------------------------------------------------- ## checking for regex.h... no checking pwd.h usability... no checking pwd.h presence... yes configure: WARNING: pwd.h: present but cannot be compiled configure: WARNING: pwd.h: check for missing prerequisite headers? configure: WARNING: pwd.h: see the Autoconf documentation configure: WARNING: pwd.h: section "Present But Cannot Be Compiled" configure: WARNING: pwd.h: proceeding with the compiler's result configure: WARNING: ## ------------------------------------------------------------------------- ## configure: WARNING: ## Report this to http://sourceforge.net/tracker/?group_id=65612&atid=511612 ## configure: WARNING: ## ------------------------------------------------------------------------- ## checking for pwd.h... no checking grp.h usability... no checking grp.h presence... yes configure: WARNING: grp.h: present but cannot be compiled configure: WARNING: grp.h: check for missing prerequisite headers? configure: WARNING: grp.h: see the Autoconf documentation configure: WARNING: grp.h: section "Present But Cannot Be Compiled" configure: WARNING: grp.h: proceeding with the compiler's result configure: WARNING: ## ------------------------------------------------------------------------- ## configure: WARNING: ## Report this to http://sourceforge.net/tracker/?group_id=65612&atid=511612 ## configure: WARNING: ## ------------------------------------------------------------------------- ## checking for grp.h... no checking stdio.h usability... no checking stdio.h presence... yes configure: WARNING: stdio.h: present but cannot be compiled configure: WARNING: stdio.h: check for missing prerequisite headers? configure: WARNING: stdio.h: see the Autoconf documentation configure: WARNING: stdio.h: section "Present But Cannot Be Compiled" configure: WARNING: stdio.h: proceeding with the compiler's result configure: WARNING: ## ------------------------------------------------------------------------- ## configure: WARNING: ## Report this to http://sourceforge.net/tracker/?group_id=65612&atid=511612 ## configure: WARNING: ## ------------------------------------------------------------------------- ## checking for stdio.h... no checking pthread.h usability... no checking pthread.h presence... yes configure: WARNING: pthread.h: present but cannot be compiled configure: WARNING: pthread.h: check for missing prerequisite headers? configure: WARNING: pthread.h: see the Autoconf documentation configure: WARNING: pthread.h: section "Present But Cannot Be Compiled" configure: WARNING: pthread.h: proceeding with the compiler's result configure: WARNING: ## ------------------------------------------------------------------------- ## configure: WARNING: ## Report this to http://sourceforge.net/tracker/?group_id=65612&atid=511612 ## configure: WARNING: ## ------------------------------------------------------------------------- ## checking for pthread.h... no checking ctype.h usability... no checking ctype.h presence... yes configure: WARNING: ctype.h: present but cannot be compiled configure: WARNING: ctype.h: check for missing prerequisite headers? configure: WARNING: ctype.h: see the Autoconf documentation configure: WARNING: ctype.h: section "Present But Cannot Be Compiled" configure: WARNING: ctype.h: proceeding with the compiler's result configure: WARNING: ## ------------------------------------------------------------------------- ## configure: WARNING: ## Report this to http://sourceforge.net/tracker/?group_id=65612&atid=511612 ## configure: WARNING: ## ------------------------------------------------------------------------- ## checking for ctype.h... no checking getopt.h usability... no checking getopt.h presence... yes configure: WARNING: getopt.h: present but cannot be compiled configure: WARNING: getopt.h: check for missing prerequisite headers? configure: WARNING: getopt.h: see the Autoconf documentation configure: WARNING: getopt.h: section "Present But Cannot Be Compiled" configure: WARNING: getopt.h: proceeding with the compiler's result configure: WARNING: ## ------------------------------------------------------------------------- ## configure: WARNING: ## Report this to http://sourceforge.net/tracker/?group_id=65612&atid=511612 ## configure: WARNING: ## ------------------------------------------------------------------------- ## checking for getopt.h... no checking limits.h usability... no checking limits.h presence... yes configure: WARNING: limits.h: present but cannot be compiled configure: WARNING: limits.h: check for missing prerequisite headers? configure: WARNING: limits.h: see the Autoconf documentation configure: WARNING: limits.h: section "Present But Cannot Be Compiled" configure: WARNING: limits.h: proceeding with the compiler's result configure: WARNING: ## ------------------------------------------------------------------------- ## configure: WARNING: ## Report this to http://sourceforge.net/tracker/?group_id=65612&atid=511612 ## configure: WARNING: ## ------------------------------------------------------------------------- ## checking for limits.h... no checking stddef.h usability... no checking stddef.h presence... yes configure: WARNING: stddef.h: present but cannot be compiled configure: WARNING: stddef.h: check for missing prerequisite headers? configure: WARNING: stddef.h: see the Autoconf documentation configure: WARNING: stddef.h: section "Present But Cannot Be Compiled" configure: WARNING: stddef.h: proceeding with the compiler's result configure: WARNING: ## ------------------------------------------------------------------------- ## configure: WARNING: ## Report this to http://sourceforge.net/tracker/?group_id=65612&atid=511612 ## configure: WARNING: ## ------------------------------------------------------------------------- ## checking for stddef.h... no checking sys/utsname.h usability... no checking sys/utsname.h presence... yes configure: WARNING: sys/utsname.h: present but cannot be compiled configure: WARNING: sys/utsname.h: check for missing prerequisite headers? configure: WARNING: sys/utsname.h: see the Autoconf documentation configure: WARNING: sys/utsname.h: section "Present But Cannot Be Compiled" configure: WARNING: sys/utsname.h: proceeding with the compiler's result configure: WARNING: ## ------------------------------------------------------------------------- ## configure: WARNING: ## Report this to http://sourceforge.net/tracker/?group_id=65612&atid=511612 ## configure: WARNING: ## ------------------------------------------------------------------------- ## checking for sys/utsname.h... no checking libintl.h usability... no checking libintl.h presence... yes configure: WARNING: libintl.h: present but cannot be compiled configure: WARNING: libintl.h: check for missing prerequisite headers? configure: WARNING: libintl.h: see the Autoconf documentation configure: WARNING: libintl.h: section "Present But Cannot Be Compiled" configure: WARNING: libintl.h: proceeding with the compiler's result configure: WARNING: ## ------------------------------------------------------------------------- ## configure: WARNING: ## Report this to http://sourceforge.net/tracker/?group_id=65612&atid=511612 ## configure: WARNING: ## ------------------------------------------------------------------------- ## checking for libintl.h... no checking sys/capability.h usability... no checking sys/capability.h presence... no checking for sys/capability.h... no checking linux/capability.h usability... no checking linux/capability.h presence... yes configure: WARNING: linux/capability.h: present but cannot be compiled configure: WARNING: linux/capability.h: check for missing prerequisite headers? configure: WARNING: linux/capability.h: see the Autoconf documentation configure: WARNING: linux/capability.h: section "Present But Cannot Be Compiled" configure: WARNING: linux/capability.h: proceeding with the compiler's result configure: WARNING: ## ------------------------------------------------------------------------- ## configure: WARNING: ## Report this to http://sourceforge.net/tracker/?group_id=65612&atid=511612 ## configure: WARNING: ## ------------------------------------------------------------------------- ## checking for linux/capability.h... no checking utimes.h usability... no checking utimes.h presence... no checking for utimes.h... no checking sys/time.h usability... no checking sys/time.h presence... yes configure: WARNING: sys/time.h: present but cannot be compiled configure: WARNING: sys/time.h: check for missing prerequisite headers? configure: WARNING: sys/time.h: see the Autoconf documentation configure: WARNING: sys/time.h: section "Present But Cannot Be Compiled" configure: WARNING: sys/time.h: proceeding with the compiler's result configure: WARNING: ## ------------------------------------------------------------------------- ## configure: WARNING: ## Report this to http://sourceforge.net/tracker/?group_id=65612&atid=511612 ## configure: WARNING: ## ------------------------------------------------------------------------- ## checking for sys/time.h... no checking wchar.h usability... no checking wchar.h presence... yes configure: WARNING: wchar.h: present but cannot be compiled configure: WARNING: wchar.h: check for missing prerequisite headers? configure: WARNING: wchar.h: see the Autoconf documentation configure: WARNING: wchar.h: section "Present But Cannot Be Compiled" configure: WARNING: wchar.h: proceeding with the compiler's result configure: WARNING: ## ------------------------------------------------------------------------- ## configure: WARNING: ## Report this to http://sourceforge.net/tracker/?group_id=65612&atid=511612 ## configure: WARNING: ## ------------------------------------------------------------------------- ## checking for wchar.h... no checking wctype.h usability... no checking wctype.h presence... yes configure: WARNING: wctype.h: present but cannot be compiled configure: WARNING: wctype.h: check for missing prerequisite headers? configure: WARNING: wctype.h: see the Autoconf documentation configure: WARNING: wctype.h: section "Present But Cannot Be Compiled" configure: WARNING: wctype.h: proceeding with the compiler's result configure: WARNING: ## ------------------------------------------------------------------------- ## configure: WARNING: ## Report this to http://sourceforge.net/tracker/?group_id=65612&atid=511612 ## configure: WARNING: ## ------------------------------------------------------------------------- ## checking for wctype.h... no checking for stddef.h... (cached) no checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking for an ANSI C-conforming const... yes checking for inline... inline checking for off_t... no checking for pid_t... no checking for size_t... no checking for struct stat.st_rdev... no checking whether sys_siglist is declared... no checking for size_t... (cached) no configure: error: Cannot find size_t type error: Bad exit status from /var/tmp/rpm-tmp.TWF4QX (%build) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.TWF4QX (%build) ++ cleanup ++ set +e ++ sync ++ sleep 5 ++ sync ++ mount.static -o remount,ro / ++ poweroff reboot: Power down Power off