[ 0.0] Examining the guest ... [ 27.9] Setting a random seed [ 28.0] Installing firstboot script: /mnt/tmp/riscv64/tmp/ckermit.G55lKh/ckermit-boot.sh [ 28.0] Copying: /mnt/tmp/riscv64/tmp/ckermit.G55lKh/ckermit-9.0.302-13.fc27.src.rpm to /var/tmp [ 28.1] Copying: /mnt/tmp/riscv64/tmp/ckermit.G55lKh/local.repo to /etc/yum.repos.d/ [ 28.2] Finishing off OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.16.0-rc2-00328-gebea62367bc4 (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #4 SMP Mon Feb 26 16:05:16 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29848 r0 d31592 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: ro root=/dev/vda Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119568K/4192256K available (5917K kernel code, 341K rwdata, 1553K rodata, 201K init, 846K bss, 72688K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped riscv,cpu_intc,2: 64 local interrupts mapped riscv,cpu_intc,3: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 2 PID: 0 at drivers/irqchip/irq-riscv-intc.c:158 riscv_irq_enable+0x92/0x94 CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.16.0-rc2-00328-gebea62367bc4 #4 Call Trace: [] walk_stackframe+0x0/0xa2 [] show_stack+0x26/0x34 [] dump_stack+0x5e/0x7c [] __warn+0xc6/0xdc [] warn_slowpath_null+0x2c/0x3e [] riscv_irq_enable+0x8e/0x94 [] irq_enable+0x3a/0x6a [] __irq_startup+0x80/0x88 [] irq_startup+0x4e/0xe2 [] irq_activate_and_startup+0x1c/0x28 [] __irq_do_set_handler+0x6e/0x134 [] irq_set_chained_handler_and_data+0x2c/0x4a [] plic_init+0x216/0x34a [] of_irq_init+0x132/0x232 [] irqchip_init+0x10/0x1c [] init_IRQ+0x8/0x14 [] start_kernel+0x1f6/0x32c [] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace a21f64d6a74625f3 ]--- riscv,plic0,c000000: mapped 10 interrupts to 4/8 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 console [tty0] enabled bootconsole [early0] disabled OF: fdt: Ignoring memory range 0x80000000 - 0x80200000 Linux version 4.16.0-rc2-00328-gebea62367bc4 (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #4 SMP Mon Feb 26 16:05:16 GMT 2018 bootconsole [early0] enabled Initial ramdisk at: 0x (ptrval) (512 bytes) Zone ranges: DMA32 empty Normal [mem 0x0000000080200000-0x000000017fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000080200000-0x000000017fffffff] Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff] elf_hwcap is 0x112d percpu: Embedded 15 pages/cpu @ (ptrval) s29848 r0 d31592 u61440 Built 1 zonelists, mobility grouping on. Total pages: 1033735 Kernel command line: ro root=/dev/vda Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Sorting __ex_table... Memory: 4119568K/4192256K available (5917K kernel code, 341K rwdata, 1553K rodata, 201K init, 846K bss, 72688K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 riscv,cpu_intc,0: 64 local interrupts mapped riscv,cpu_intc,1: 64 local interrupts mapped riscv,cpu_intc,2: 64 local interrupts mapped riscv,cpu_intc,3: 64 local interrupts mapped ------------[ cut here ]------------ WARNING: CPU: 2 PID: 0 at drivers/irqchip/irq-riscv-intc.c:158 riscv_irq_enable+0x92/0x94 CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.16.0-rc2-00328-gebea62367bc4 #4 Call Trace: [] walk_stackframe+0x0/0xa2 [] show_stack+0x26/0x34 [] dump_stack+0x5e/0x7c [] __warn+0xc6/0xdc [] warn_slowpath_null+0x2c/0x3e [] riscv_irq_enable+0x8e/0x94 [] irq_enable+0x3a/0x6a [] __irq_startup+0x80/0x88 [] irq_startup+0x4e/0xe2 [] irq_activate_and_startup+0x1c/0x28 [] __irq_do_set_handler+0x6e/0x134 [] irq_set_chained_handler_and_data+0x2c/0x4a [] plic_init+0x216/0x34a [] of_irq_init+0x132/0x232 [] irqchip_init+0x10/0x1c [] init_IRQ+0x8/0x14 [] start_kernel+0x1f6/0x32c [] _sinittext+0x4e/0x56 random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0 ---[ end trace a21f64d6a74625f3 ]--- riscv,plic0,c000000: mapped 10 interrupts to 4/8 handlers clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns Console: colour dummy device 80x25 console [tty0] enabled bootconsole [early0] disabled Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns smp: Brought up 1 node, 4 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 1024 (order: 4, 65536 bytes) NET: Registered protocol family 16 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource riscv_clocksource NET: Registered protocol family 2 tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes) TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Initialise system trusted keyrings workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... SGI XFS with ACLs, security attributes, no debug enabled random: fast init done NET: Registered protocol family 38 Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 13, base_baud = 230400) is a 16550A console [ttyS0] enabled [drm] radeon kernel modesetting enabled. loop: module loaded virtio_blk virtio0: [vda] 41943040 512-byte logical blocks (21.5 GB/20.0 GiB) libphy: Fixed MDIO Bus: probed e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 Key type dns_resolver registered Loading compiled-in X.509 certificates EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 254:0. Freeing unused kernel memory: 200K This architecture does not have kernel memory protection. systemd[1]: System time before build time, advancing clock. systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) systemd[1]: Detected architecture riscv64. Welcome to Fedora 28 (Rawhide)! systemd[1]: Set hostname to . systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. systemd[1]: Reached target Slices. [ OK ] Reached target Slices. systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. Mounting POSIX Message Queue File System... [ OK ] Listening on Network Service Netlink Socket. [ OK ] Reached target Remote File Systems. [ OK ] Reached target Swap. Mounting Temporary Directory (/tmp)... [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Created slice system-sshd\x2dkeygen.slice. [ OK ] Created slice system-getty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Paths. Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. systemd[1]: Starting Journal Service... Starting Journal Service... systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. systemd[1]: Starting udev Coldplug all Devices... Starting udev Coldplug all Devices... systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. systemd[1]: Mounted Temporary Directory (/tmp). [ OK ] Mounted Temporary Directory (/tmp). EXT4-fs (vda): re-mounted. Opts: (null) systemd[1]: Started Apply Kernel Variables. [ OK ] Started Apply Kernel Variables. systemd[1]: Started Remount Root and Kernel File Systems. [ OK ] Started Remount Root and Kernel File Systems. systemd[1]: Starting Configure read-only root support... Starting Configure read-only root support... systemd[1]: Starting Create System Users... Starting Create System Users... Starting Rebuild Hardware Database... [ OK ] Started Journal Service. Starting Flush Journal to Persistent Storage... [ OK ] Started Configure read-only root support. Starting Load/Save Random Seed... systemd-journald[86]: Received request to flush runtime journal from PID 1 [ OK ] Started Load/Save Random Seed. [* ] (1 of 5) A start job is running for…dplug all Devices (10s / no limit) [** ] (1 of 5) A start job is running for…dplug all Devices (11s / no limit) [*** ] (1 of 5) A start job is running for…dplug all Devices (11s / no limit) [ OK ] Started Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Rebuild Dynamic Linker Cache... Starting Rebuild Journal Catalog... Starting Create Volatile Files and Directories... [ OK ] Started Rebuild Journal Catalog. [ OK ] Started udev Coldplug all Devices. [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Rebuild Dynamic Linker Cache. [ OK ] Started Rebuild Hardware Database. Starting udev Kernel Device Manager... Starting Update is Completed... [ OK ] Started Update is Completed. [ OK ] Started udev Kernel Device Manager. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Started dnf makecache timer. [ OK ] Reached target Timers. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting OpenSSH rsa Server Key Generation... Starting OpenSSH ed25519 Server Key Generation... Starting Login Service... Starting OpenSSH ecdsa Server Key Generation... [ OK ] Started D-Bus System Message Bus. [ OK ] Started Login Service. Starting Network Service... [ OK ] Started OpenSSH ed25519 Server Key Generation. [ OK ] Started OpenSSH ecdsa Server Key Generation. [ OK ] Found device /dev/ttyS0. [ OK ] Started Network Service. [ OK ] Started OpenSSH rsa Server Key Generation. Starting Wait for Network to be Configured... [ OK ] Reached target Network. Starting Permit User Sessions... Starting libguestfs firstboot service... [ OK ] Reached target sshd-keygen.target. Starting OpenSSH server daemon... [ OK ] Started Wait for Network to be Configured. [ OK ] Started Permit User Sessions. firstboot.sh[154]: /usr/lib/virt-sysprep/firstboot.sh start [ OK ] Started Getty on tty1. firstboot.sh[154]: Scripts dir: /usr/lib/virt-sysprep/scripts [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. [ OK ] Reached target Network is Online. [ OK ] Started Set the date and time. firstboot.sh[154]: === Running /usr/lib/virt-sysprep/scripts/0001--mnt-tmp-riscv64-tmp-ckermit-G55lKh-ckermit-boot-sh === firstboot.sh[154]: Welcome to the Fedora/RISC-V stage4 builder firstboot.sh[154]: + set -e firstboot.sh[154]: + exec Welcome to the Fedora/RISC-V stage4 disk image https://fedoraproject.org/wiki/Architectures/RISC-V Kernel 4.16.0-rc2-00328-gebea62367bc4 on an riscv64 (ttyS0) The root password is ‘riscv’. To install new packages use ‘dnf install ...’ If DNS isn’t working, try editing ‘/etc/yum.repos.d/local.repo’. For updates and latest information read: https://fedorapeople.org/groups/risc-v/disk-images/readme.txt stage4-builder login: random: crng init done [FAILED] Failed to start OpenSSH server daemon. See 'systemctl status sshd.service' for details. [ OK ] Stopped OpenSSH server daemon. [ OK ] Stopped target sshd-keygen.target. Stopping sshd-keygen.target. [ OK ] Reached target sshd-keygen.target. Starting OpenSSH server daemon... [FAILED] Failed to start OpenSSH server daemon. See 'systemctl status sshd.service' for details. [ OK ] Stopped OpenSSH server daemon. [ OK ] Stopped target sshd-keygen.target. Stopping sshd-keygen.target. [ OK ] Reached target sshd-keygen.target. Starting OpenSSH server daemon... qemu-system-riscv64: terminating on signal 15 from pid 31518 (-bash) *stdin*:3: libguestfs: error: download: /buildok: No such file or directory